How to activate the cruise control on Changan CS75 PLUS?

1 Answers
VanAdam
07/29/25 8:13pm
To use the cruise control on the Changan CS75 PLUS, when the vehicle speed reaches above 80, press the corresponding function button to activate it. Cruise Control: The cruise control system, abbreviated as CCS, is also known as the cruise control driving device, speed control system, or autonomous driving system. Usage Method: The Changan CS75 PLUS is equipped with IACC adaptive cruise control. Simply locate the IACC button on the steering wheel, enable the automatic following and lane-keeping functions, and it's ready to use. This vehicle features the IACC adaptive cruise control system, fully achieving Level 2 autonomous driving. When the speed exceeds 60 km/h, it can automatically identify the target lane and vehicle ahead, enabling automatic following. In traffic congestion, the traffic jam assist can be activated. If the speed is below 60 km/h and lane markings are identifiable, the vehicle can adaptively drive within the lane. If lane markings are not detectable, it can closely follow the vehicle ahead. When approaching a curve, the vehicle can recognize the upcoming bend and gradually decelerate to navigate the turn, then accelerate back to the preset speed upon exiting the curve.
Was this review help?
18
4
Share
More Forum Discussions

Which off-road vehicles come with three differential locks?

Off-road vehicles equipped with three differential locks include the following models: Jeep Wrangler Rubicon, Land Rover Defender, Mercedes-Benz G-Class, Hummer H1, and Dongfeng Hanma. The Jeep Wrangler Rubicon is powered by a 3.8-liter V6 engine, delivering a maximum output of 202 horsepower and 320 Nm of torque. The Land Rover Defender features an upgraded 2.3-liter gasoline engine, while its Series 2 diesel engine has undergone a comprehensive redesign. The Mercedes-Benz G-Class boasts a maximum torque of 700 Nm, with power output increased from 350 kW to 368 kW. The Hummer H1 utilizes a General Motors-designed V8 6.5-liter diesel engine, producing 170 horsepower, and incorporates differential locks at the front, center, and rear. The Dongfeng Hanma, inspired by the American Hummer A2 model, surpasses its counterpart in 10 key performance indicators: load capacity, power performance, survivability, environmental adaptability, safety, ride comfort, waterproof sealing, maintainability, durability of key load-bearing components, and model diversity.
14
0
Share

Is the Ingenium engine developed by Chery?

The Ingenium engine is produced by Jaguar Land Rover at their engine plant in Wolverhampton and is developed by Chery. The engine model used by Jaguar is the PT204, with a maximum horsepower of 200, a maximum power of 147KW, a maximum power speed of 5500rpm, and a peak torque of 320N.m. For daily maintenance of Jaguar's engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication area, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
7
2
Share

Why Does the Exhaust Pipe Smell Like Gasoline?

The reasons for the exhaust pipe smelling like gasoline: 1. There is an issue or malfunction in the car's ignition system, such as spark plug leakage, weak high voltage, or weak spark, etc.; 2. Incomplete or insufficient combustion of the fuel-air mixture. Reasons for car smoke: 1. Black smoke is mainly due to poor combustion; 2. Blue smoke is mainly caused by burning engine oil, severe wear between the piston rings and cylinder liners, poor sealing, and more engine oil entering the combustion chamber, which also results in blue smoke; 3. White smoke is mainly liquid vapor. Water is one of the combustion products. During cold starts, when the vehicle's temperature hasn't risen yet, the water vapor condenses when it meets the cold exhaust pipe, forming white smoke. This is normal and a common occurrence of white smoke. However, under ordinary circumstances, white smoke might be caused by improper refueling, water mixed into the fuel, or damage to the cylinder, allowing coolant to enter the cylinder through gaps, which is then expelled in gaseous form under high temperatures.
1
0
Share

What are the auxiliary configurations of the Touran?

Touran is equipped with front and rear parking radars, reversing camera, cruise control, automatic parking, engine start-stop, auto hold, and hill start assist. The above configurations are not standard across all models; only the top-tier model includes all of these features. Touran is an MPV model, available in both six-seater and seven-seater versions. Below are the relevant configurations of the Touran: 1. The Touran is powered by a 1.4-liter turbocharged engine, which is the well-known EA211 series. This engine can be found in many Volkswagen vehicles. 2. The Touran's engine delivers a maximum power of 110 kW and a maximum torque of 250 Nm, with the maximum power achieved at 5,000 rpm and the maximum torque available between 1,750 and 3,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. 3. The Touran is paired with a 7-speed dual-clutch transmission. 4. The Touran's front suspension uses a MacPherson independent suspension, while the rear suspension employs a four-link independent suspension.
5
4
Share

What are the layout forms of automotive transmission systems?

Automotive transmission systems have the following layout forms: 1. Front-engine, rear-wheel drive—FR: This is a traditional layout where the engine is placed at the front and the rear wheels are driven. Most trucks, some sedans, and some buses, both domestically and internationally, adopt this layout. 2. Rear-engine, rear-wheel drive—RR: In this layout, the engine is placed at the rear, and the rear wheels are driven. It is commonly used in large buses, with a few micro and light sedans also adopting this form. The rear-engine placement prevents the front axle from being overloaded, maximizes cabin space utilization, effectively lowers the floor height or utilizes the space under the middle floor for luggage storage, and reduces the impact of engine heat and noise on the driver. 3. Front-engine, front-wheel drive—FF: In this layout, the engine is placed at the front, and the front wheels are driven. This configuration features simple control mechanisms and good engine cooling conditions. However, during uphill driving, the vehicle's weight shifts backward, reducing the adhesion weight of the front drive wheels and making them prone to slipping. During downhill braking, the weight shifts forward, overloading the front wheels and increasing the risk of rollover at high speeds. Most sedans today use this layout. 4. Mid-engine, rear-wheel drive—MR: The engine is placed between the front and rear axles, with the rear wheels being driven.
5
1
Share

What Causes the ABS Light to Illuminate While Driving?

ABS light illumination can occur in various states, each with different causes and solutions, as detailed below: State 1: ABS warning light remains constantly on (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting its ability to detect wheel speed signals. This prevents the ABS control unit from determining vehicle speed or calculating wheel slip rates, thus failing to issue appropriate braking commands. Solution: Clean the wheel speed sensor and adjust the gap between the sensor and the tone ring to restore normal function. Cause 2: Loose connections in system wiring or poor contact in ABS relays causing signal interference. Solution: Inspect wiring connections and secure any loose terminals. State 2: ABS warning light intermittently illuminates but turns off during acceleration. Cause: Battery voltage drops below 10.5V when multiple electrical components are in use. The light extinguishes when engine RPM increases and voltage rises. Possible low voltage supply to ABS system due to poor terminal contact or grounding issues. Solution: Check battery specific gravity; inspect charging system; examine power supply components (voltage relay or loose power connections). State 3: ABS warning light stays illuminated after engine start until engine is turned off. Cause: Poor grounding connection at ABS hydraulic valve body; faulty wiring harness connection at valve body; ABS control module malfunction. Solution: Loosen and retighten hydraulic valve body ground screw, cleaning contact surfaces if necessary; check for connector pin gap expansion; replace ABS or ABS/ASR control module. State 4: ABS warning light activates during high-speed driving. Cause: ABS control module detects excessive speed difference between front and rear wheels; incorrect tire or wheel rim specifications. Solution: Verify proper tire and wheel rim specifications as indicated on vehicle's fuel filler door label. State 5: ABS warning light flashes intermittently. Cause: Improper brake light switch adjustment; internal contact failure in brake lights. Solution: With engine running, fully depress brake pedal while manually pushing brake switch linkage downward, then release pedal to reset position; replace brake light switch if necessary. When the ABS warning light is illuminated, continued driving is not recommended. An active ABS fault indicates potential loss of anti-lock braking function, which may cause wheel lock-up during emergency braking, resulting in loss of vehicle control and compromised ability to decelerate or steer - presenting significant safety risks.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.