How to activate the automatic window closing when locking the car on Haval H6?

2 Answers
Fernando
07/24/25 11:15pm
Find the window control buttons for opening and closing the windows located below the driver's side window. Press and hold the window switch to fully open the window; then press and hold the switch again until the window is completely closed. After the window is closed, continue holding the button for 2 seconds to activate the automatic window closing feature when locking the car.
Was this review help?
17
1
Share
MaggieDella
08/10/25 3:18pm
My Haval H6 is the 2018 Sport version, and the auto window roll-up upon locking feature is quite practical. When the car is powered on but not started, hold down the window control button on the driver's door for 5 seconds without moving until you hear a beep, and the setting is complete. After that, every time you lock the car after getting out, all four windows and the sunroof will automatically roll up and close tightly. However, be cautious if the windows have dark tint film, as it might pinch the side mirrors in summer. Also, this feature requires the original car module support; some lower trim models may need to visit the 4S store to activate it via programming. Now, the latest third-generation H6 seems to allow direct adjustment in the window settings on the central control screen.
Was this review help?
1
4
Share
Expand All
More Forum Discussions

How to Determine if the Car is in the Middle of the Road in Subject Three?

Subject Three: Methods to determine if the car is driving in the middle of the road: 1. Using the lower edge of the front window as a reference: Keep the point 10 to 15 centimeters inward from the left lower edge of the front window aligned with the left edge line of the road, and the vehicle will be driving in the middle of the road. 2. Using the left and right edge lines of the road as references: Observe through the rearview mirrors to check the distance between the car body and the road edge lines. Maintain a slightly larger distance on the left side than on the right side, ensuring the vehicle stays in the middle of the road. 3. Using a distant point as a reference: During driving, focus your gaze on a distant point ahead and always aim for the middle point of the road in the distance, which will help keep the vehicle centered on the road.
9
2
Share

How to set up the audio system in the Lynk & Co 03?

The audio settings for the Lynk & Co 03 are as follows: adjust the treble to 5, the midrange to 7, and the bass to 4. These settings will help achieve a better sound effect for the Lynk & Co 03's audio system. However, everyone has different preferences for sound quality, so you can adjust the audio settings according to your personal taste to achieve the sound you find most pleasing. The Lynk & Co 03 is a compact sedan under the Lynk & Co brand. It features a MacPherson independent front suspension and a multi-link independent rear suspension. In terms of body dimensions, it measures 4639mm in length, 1840mm in width, and 1472mm in height, with a wheelbase of 2730mm. The vehicle is front-wheel drive.
16
5
Share

Are the official exam and mock exam for Subject 1 the same?

Subject 1 exam questions are identical to those in mock exams. The content of Subject 1 comes from the question bank of the vehicle management office. Mock questions are also sourced from the updated Subject 1 exam question bank maintained by the Ministry of Public Security, making the exam questions the same. Additional information: 1. Subject 1 exam content: Subject 1, also known as the theoretical exam or driver's theory test, is part of the motor vehicle driver's license assessment. The exam covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is computer-based, consisting of 100 questions, with a passing score of 90 or above. 2. Subject 1 exam duration: The total time for the Subject 1 exam is 45 minutes. The exam paper consists of 100 questions, including true/false and multiple-choice questions, with a full score of 100 and a passing score of 90.
8
1
Share

What is the appropriate speed for high-speed turns?

When navigating sharp turns, the maximum driving speed should not exceed 30 kilometers per hour. Here is additional information: 1. Turning based on terrain: When turning a vehicle, it is essential to fully estimate the vehicle's minimum turning radius and the difference in wheel paths, especially during sharp turns or when towing trailers or semi-trailers. Pay attention to preventing the outer front wheel from going off the road or colliding with obstacles, and avoid the inner rear wheel dropping into a ditch or hitting obstacles. 2. Precautions during turns: When turning, reduce the vehicle speed and avoid steering too sharply to prevent excessive centrifugal force that could cause the vehicle to skid. If the vehicle begins to skid, immediately release the accelerator pedal and steer the wheel toward the direction of the skid. Once the vehicle regains straight-line stability, straighten the steering wheel and continue driving. It is advisable to avoid using the brakes during turns, especially emergency braking, to prevent skidding or accidents.
17
1
Share

What lights to use when facing oncoming traffic at night?

Use low beam lights when facing oncoming traffic at night. When encountering oncoming traffic: If low beams were already in use, no adjustment is needed; if high beams were previously on, they should be switched to low beams in advance. Otherwise, high beams may prevent the oncoming driver from accurately judging your vehicle's width, potentially causing accidents. After passing the oncoming vehicle, assess road conditions to determine whether to switch back to high beams. When overtaking, use turn signals: Activate the turn signal in advance, then honk and rapidly toggle between high and low beams to alert the vehicle ahead. After confirming the leading vehicle has no intention of changing lanes, execute the overtaking maneuver promptly. Avoid prolonged side-by-side driving. Upon completing the overtake, when sufficient distance from the overtaken vehicle has been established, activate the turn signal and return to the original lane by moving right.
10
5
Share

What Causes the Slow Response of Sensor Lights?

It may be due to design reasons. To prevent frequent activation of headlights caused by short-term obstructions like tree shadows, the design intentionally incorporates a delay of about ten seconds before the headlights automatically turn on. If you find the visibility too poor when entering a tunnel before the headlights have time to activate, you can manually turn them on. Below is additional information about radar sensor lights: 1. Doppler Module: The Doppler module consists of a microwave transistor, resistors, capacitors, and a printed antenna. During operation, it emits microwave signals into the surrounding space. The Doppler signal processing circuit is usually composed of a low-power BISS0001 IC, which determines the sensitivity and delay time of the sensor light. For easy adjustment, radar sensor switches generally include potentiometers for adjusting the sensing distance and delay time, with access windows on the casing. 2. Radar Sensor Switch: Radar sensor switches can be used for the sensor control of incandescent, fluorescent, and LED lights, with a control range of up to 8m. These radar sensor switches feature light control and allow adjustment of the sensing distance and delay time.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.