How to Activate the Automatic Parking Feature in Mercedes-Benz GLC?

1 Answers
OClayton
07/29/25 11:55pm
To activate the automatic parking feature in the Mercedes-Benz GLC, the vehicle's speed must be below 30 mph for the system to engage automatically. Important considerations when using the automatic parking feature: 1. Keep your foot on the brake pedal while using the automatic parking system to prevent sudden loss of control or failure to detect obstacles; 2. On icy or snowy roads, the automatic parking system may fail to recognize parking lines, resulting in the inability to perform automatic parking. The Mercedes-Benz GLC features multi-link independent suspension at both the front and rear, with a front-engine, four-wheel-drive layout. It is powered by a 2.0T turbocharged engine, delivering a maximum horsepower of 197 PS, a maximum power output of 145 kW, and a peak torque of 320 Nm, paired with a 9-speed automatic transmission.
Was this review help?
20
0
Share
More Forum Discussions

How to avoid stalling when stopping at a designated point on a bridge?

When braking, quickly depress the clutch to disconnect the power transmission to prevent stalling. After the vehicle comes to a complete stop, slowly release the clutch to the power engagement critical point. Wait until the vehicle accumulates enough power to climb the slope, then gradually release the brake while observing whether the vehicle begins to move slowly.
3
4
Share

How to Use the Push Foot Brake?

Release the accelerator pedal in advance, utilize the engine's idle drag effect to decelerate, and adopt anticipatory braking to avoid emergency braking as much as possible. During anticipatory braking, you can appropriately press the foot brake pedal, determining the pressure applied based on the situation to prevent 'braking nod'. If you need to slow down or stop while driving, you can use the 'first hard then release' braking method; decide based on the situation and distance.
15
2
Share

How to Operate the Reversing Turn Signal?

The turn signal switch is generally located on the left side of the steering wheel and is operated using the fingers of the left hand. Push the lever upward. The dashboard will display the right turn indicator. Simultaneously, the right turn signals at the front and rear of the vehicle will illuminate. Similarly, when the lever is pushed downward, the left turn indicator on the dashboard will light up, and the left turn signals at the front and rear of the vehicle will also illuminate.
12
1
Share

How to use the M gear plus and minus?

When using the manual shift mode, you need to switch the gear lever to the "M" position. While driving, you can directly shift into the M gear. When the vehicle brakes or decelerates, the transmission will automatically downshift. The driver does not need to manually downshift unless encountering a situation that requires forced downshifting. When overtaking, switching to the M gear and stepping on the accelerator allows the vehicle to utilize the high torque of lower gears for instant acceleration, completing the overtaking maneuver more quickly.
1
2
Share

What are the methods for replacing the lower control arm bushing?

Lift the vehicle, remove the triangular arm rubber bushing, select two correspondingly sized metal sleeves, install the purchased rubber bushing (the larger ones are left-right specific with markings). Proceed with disassembly by removing the screws; this is the removed rubber bushing, which falls off with a gentle pull by hand. Apply dishwashing liquid to the new triangular arm rubber bushing for lubrication during installation, as it does not corrode rubber, but avoid using engine oil.
12
2
Share

How to Turn On the Ambient Lighting in the New Focus?

The ambient lighting in the new Focus automatically turns on when the headlights are activated. The interior ambient lighting serves as decorative illumination, typically in colors like red, blue, or green, primarily to enhance the atmosphere. It's important to note that the lighting colors should not interfere with normal safe driving. The Focus is a compact car under the Ford brand, powered by either a 1.5L EcoBoost or a 1.5L Ti-VCT engine, with all models meeting the China VI emission standards. In terms of dimensions, the vehicle measures 4647mm in length, 1810mm in width, and 1468mm in height, with a wheelbase of 2705mm.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.