How to activate the ambient lighting in BMW X3?

1 Answers
McAlyssa
07/30/25 9:11am
Press the round button on the left side of the steering wheel to activate the ambient lighting in BMW X3. Below is additional information about the BMW X3: 1. Body dimensions: The BMW X3 has a length of 4717mm, width of 1891mm, height of 1689mm, and a wheelbase of 2864mm. 2. Configuration: It is equipped with a 2.0TL4 engine, featuring turbocharged intake, with a maximum horsepower of 184ps and a maximum torque of 290nm. The transmission is an 8-speed automatic manual, and the top speed is 210 kilometers per hour. 3. Power: The BMW X3 is front-engine four-wheel drive, with a front suspension type of double-joint shock absorber suspension and a rear suspension type of multi-link independent suspension. The steering assistance type is electric power, and the body structure is load-bearing.
Was this review help?
19
5
Share
More Forum Discussions

Can the annual inspection be done in another location?

Vehicles can undergo annual inspection in another location. The process is as follows: 1. Vehicle annual inspection authorization: First, you need to obtain a notice of authorized inspection from the vehicle management office where the vehicle was originally registered. There is no requirement for the owner to be present in person, so the owner can have someone else handle it at the original registration location. 2. Required materials: The owner's ID card, vehicle license, insurance documents, original and photocopy of the vehicle and vessel tax, and an application for out-of-town annual inspection. If someone else is handling it on behalf of the owner, a power of attorney from the owner is required. 3. Once the relevant vehicle inspection authorization information is verified, you can proceed with the normal out-of-town vehicle inspection.
1
2
Share

How are licensed abandoned vehicles penalized?

Abandoned vehicles are subject to fines. Abandoned vehicles refer to motor vehicles that occupy public roads and their sides, parking lots, residential communities, green belts, and other areas for a long time without maintenance or use, exhibiting one or more conditions such as dilapidated appearance, dust accumulation, flat tires, and missing license plates. The reporting methods for abandoned vehicles are as follows: 1. Abandoned vehicles on public roads: Report to the police, and the urban management will cooperate with public security and traffic management departments to remove them according to the law; 2. Encountering abandoned vehicles on public roads: You can report to the traffic management department, phone: 12123; 3. Abandoned vehicles in residential communities: Report to the street and community residents, and through joint consultation and governance, come up with solutions, with urban management cooperating with comprehensive governance, public security, and fire departments in the jurisdiction to handle them.
5
0
Share

Reasons Why the Average Fuel Consumption Number on the Dashboard Doesn't Move

Introduction to the reasons why the average fuel consumption number on the dashboard doesn't move is as follows: 1. The fuel float is malfunctioning. In some older vehicles, the fuel float (also known as the fuel level sensor) may develop issues. You can check if the fuel level sensor plug on the fuel tank is loose and observe if there is any blockage during the sliding process of the fuel level sensor. 2. The fuel gauge circuit is faulty. If the fuel level sensor is functioning properly, you need to inspect the fuel gauge circuit on the car's dashboard. Use a multimeter and a needle to locate and check the corresponding fuel gauge circuit on the dashboard. The fuel level gauge displays the amount of gasoline in the car. It is particularly important to note that when the fuel gauge pointer falls below the red line and starts to alarm, although the car can still travel 30-40 kilometers, it is advisable not to wait until the fuel level alarm sounds before refueling.
13
1
Share

What causes the differential lock on the Land Cruiser to keep flashing?

Here is a detailed introduction to the reasons why the differential lock on the Toyota Land Cruiser keeps flashing: 1. Engine coolant level sensor failure: This sensor is located on the coolant expansion tank cap. When the engine coolant level drops, the warning light comes on. This switch is normally closed. 2. Working principle: The resistance of the temperature sensor changes in proportion to the coolant temperature, and this sensor sends a regulated signal voltage to the dashboard to control the instrument. Below is additional information on the main advantages of the differential lock: 1. Function: When a car turns, the wheel tracks form an arc. If the car turns left, the center point of the arc is on the left. In the same amount of time, the right wheel travels a longer arc than the left wheel. To balance this difference, the left wheel needs to slow down while the right wheel speeds up. 2. Balancing the difference: Different rotation speeds compensate for the distance difference.
9
1
Share

Why Was the Baojun 360 Discontinued?

Baojun 360 has not been discontinued and is still available for sale at major dealerships. Relevant details are as follows: 1. Configuration: The Baojun 360-CVT model comes standard with EPS electric power steering, roof rails, cruise control, ESP electronic stability system, leather seats, tire pressure monitoring, and an 8-inch central control screen. The luxury version, compared to the elite version, mainly adds features such as an electric sunroof, leather steering wheel, electric driver's seat, daytime running lights, anti-glare rearview mirror, rear air conditioning vents, and an electronic air conditioning system with a display. 2. Powertrain: The Baojun 360 is equipped with a 1.5L naturally aspirated engine, model L2B, with a maximum output power of 82kW (111PS) and a combined fuel consumption of 6.9L per 100 kilometers. The engine is paired with a 6-speed manual transmission and an automatic manual transmission. The automatic version uses a rotary knob + paddle shifters for gear changes.
16
5
Share

Is an On-Site Inspection Required in the Sixth Year?

New vehicles require an on-site inspection in the sixth year. Below are the specific details regarding vehicle on-site inspections: 1. Six-Year Exemption for New Vehicles: For the first six years, vehicles do not need to undergo an on-site inspection at a vehicle inspection station. However, owners must still conduct a biennial regular check, submitting relevant documents such as compulsory traffic accident insurance certificates and vehicle and vessel tax, to obtain the annual inspection label. 2. Vehicle Annual Inspection Time Regulations: Small and micro non-commercial vehicles must be inspected every two years within the first six years. Those meeting the exemption criteria can directly apply for the inspection label. Starting from November 20, 2020, non-commercial small and micro passenger vehicles (excluding vans) over six years but under ten years old will have their inspection cycle relaxed from once a year to once every two years. This means private cars only need two on-site inspections within ten years, specifically in the sixth and eighth years.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.