How to Activate Start-Stop After Replacing the Battery in a Civic?

Can You Wear Sunglasses During the Subject 2 Driving Test?

You cannot wear sunglasses during the Subject 2 driving test. Below is relevant information about the Subject 2 test: I. Precautions before entering the test area: 1. Bring your original ID card. 2. Wearing slippers, high heels, or colored sunglasses is prohibited. 3. Loud noise is prohibited. 4. Sign the score sheet after passing the test. II. Test precautions: 1. Ensure there are no facial obstructions during the photo, such as scarves, masks, or hats. 2. Present your ID card to the examiner when entering the vehicle, adjust the seat, turn on the left turn signal, fasten the seat belt, release the handbrake, and enter the test area only after hearing that identity verification is successful. 3. If the vehicle ahead is performing reverse parking, wait outside the arrow until the vehicle ahead proceeds to the parallel parking section before starting your test. 4. Align with the reference point ahead during parallel parking, avoid touching the solid lines on both sides, and maintain a distance of 20-50 cm between the right wheel and the parking line. 5. For the curve driving section, wait until the vehicle ahead has exited before entering the test area. If there is a vehicle ahead, wait outside the arrow.

8

1

Share

How often should the vehicle's antifreeze be replaced?

Vehicle antifreeze generally needs to be replaced every 2 years or 40,000 kilometers, which is just a reference interval. For commercial vehicles with higher mileage, the replacement interval should be shorter. Since driving conditions vary for each vehicle, the replacement should be based on actual usage. Check the antifreeze level and replenish it promptly if it is insufficient. If suspended particles, sediment, or signs of deterioration or discoloration are found in the antifreeze, it should be replaced immediately, and the system should be cleaned. Antifreeze replacement method: Before completely replacing the antifreeze, conduct a thorough inspection to check for any leaks or cracks in the pipes, with a focus on the five-way hose. The five-way hose is named for its five connection points to various parts of the vehicle. The antifreeze flows through the five-way hose and is distributed to different parts of the car to function. If there are signs of antifreeze leakage in this section, replace the hose or reseal the connections as needed. Drain the old antifreeze, then flush the fluid channels with clean water. Add clean water to the antifreeze reservoir and continue filling until water flows continuously through the engine cooling system. Then, start the engine and let it idle for 3 to 5 minutes to circulate the water. Initially, the water flowing out of the reservoir may have a faint pink tint. Continue adding clean water until the outflowing water is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new antifreeze through the radiator hose to allow it to flow quickly into the radiator. Then, add another container of antifreeze to the antifreeze reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the system. Top up the antifreeze to the "MAXT" mark on the reservoir.

7

4

Share

Which Position in the Car Should a Safety Seat Be Placed?

Child car safety seats should be installed on the rear side seats, with the preferred position being behind the driver. Below are the installation steps for a child car safety seat: 1. Insert the installation guide slot: Place the child seat on the seat, locate the lower anchor points, and insert the lower installation guide slot of the child safety seat into the lower anchor points within the seat gap until you hear a click. 2. Hook the anchor points: Raise the headrest to its highest position, then pass the tightening strap through the headrest pillar and hook it onto the upper anchor point on the back of the seat, ensuring the strap is not twisted. 3. Ensure stability: Tighten the strap and shake the child safety seat back and forth and side to side to ensure it is securely fixed.

3

0

Share

What is the corresponding oil specification for vw50200?

vw50200 corresponds to the API SN grade of engine oil. Below are the specific details about engine oil quality grades: 1. API Grade: API stands for the American Petroleum Institute, and the API grade represents the quality grade of engine oil. Codes are used to describe the working capability of engine oil. The grades are classified as SA, SB, SC, SD, SE, SF, SG, SH, SJ, SL, SM, and SN, with the latter letters indicating progressively higher grades. The SP grade is currently the highest-level engine oil. SJ was the standard in the 1990s, SL in 2001, SM in 2004, and SN in 2010. 2. Oil Grade: SP-grade oil, being the highest level, generally falls under the category of full synthetic oil. Semi-synthetic oils are mostly SL or SM grade, though some are SN grade. Among international brands, oil grades are mostly SF or above. For example, Shell Helix Ultra is API-SM grade, while Shell Helix Red is API-SG grade, indicating that Helix Ultra has a higher quality grade than Helix Red.

15

5

Share

What is the fuel consumption of the Beijing BJ40?

The fuel consumption of the Beijing BJ40 is 9.4L/100Km. Below are the specific details of the Beijing BJ40: 1. Vehicle Positioning: The Beijing BJ40 is manufactured by Beijing Off-Road and is classified as a compact SUV. Its dimensions are 4630mm in length, 1925mm in width, and 1871mm in height, with a wheelbase of 2745mm. The body type is a 5-door, 5-seat SUV. 2. Powertrain: The BJ40 is equipped with a 2.0T L4 engine featuring turbocharged intake, delivering a maximum horsepower of 224ps and a maximum torque of 380nm. The transmission is an 8-speed automatic manual. 3. Suspension Type: The front suspension is a double-wishbone coil spring independent suspension, while the rear suspension is a five-link coil spring non-independent suspension.

20

2

Share

Why is the air conditioning in the car not cooling?

Here are the specific reasons and solutions for the car air conditioner not cooling: 1. Insufficient or low refrigerant: This may be caused by minor refrigerant leakage. You can observe it from the sight glass on the dryer tank. During normal operation of the air conditioner, if there are continuous and slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it indicates severe refrigerant shortage. In this case, simply adding refrigerant will solve the problem. 2. Loose drive belt of the car air conditioning compressor: If the drive belt is loose, the compressor will slip during operation, leading to reduced transmission efficiency and decreased compressor speed. This results in reduced delivery of compressed refrigerant, causing the car air conditioner to not cool. If the compressor drive belt is too loose, it should be tightened. If it cannot be turned by hand, it means the drive belt is too tight and should be loosened slightly. If tightening is ineffective or the drive belt has cracks, aging, or other damage, a new drive belt should be replaced.

8

0

Share

How to Activate Start-Stop After Replacing the Battery in a Civic?

Can You Wear Sunglasses During the Subject 2 Driving Test?

How often should the vehicle's antifreeze be replaced?

Which Position in the Car Should a Safety Seat Be Placed?

What is the corresponding oil specification for vw50200?

What is the fuel consumption of the Beijing BJ40?

Why is the air conditioning in the car not cooling?

How to Restart a Frozen Central Control Screen in Geely Vision?

Does Stepping on the Accelerator in P Gear Harm the Car?

What is the replacement interval for the transmission fluid in the Tiguan 1.8T?

How to Check the Production Date of Car Headlights?