How to Activate Sport Mode in BMW?

Does a CVT transmission require transmission fluid?

CVT transmissions require transmission fluid, and it needs to be replaced periodically. Transmission fluid is an oil product that keeps the shifting system clean, ensuring the transmission operates normally and extending the lifespan of the transmission components. If the transmission fluid deteriorates, turns black, becomes viscous, or develops an unusual odor, it should be replaced immediately. It is important to note that when changing the fluid, only the automatic transmission fluid specified by the manufacturer should be used. This is because different automatic transmissions have varying internal structures, friction components, and sealing components. Mixing two different fluids inside the transmission can degrade the performance of the transmission fluid, leading to issues such as poor lubrication or abnormal operation of the transmission.

9

4

Share

Where is the transmission oil filler port on the Ford Focus?

Ford Focus transmission oil filler port is located near the reverse gear switch, which can be accessed by removing the reverse gear switch. The transmission, also known as the gearbox, is an automotive component used to alter the speed and torque from the engine, and can fix or change the gear ratio between the output shaft and input shaft. The Ford Focus is a compact 4-door 5-seater sedan with dimensions of 4647mm in length, 1810mm in width, and 1468mm in height, and a wheelbase of 2705mm, equipped with a 6-speed manual transmission. The Ford Focus is powered by a 1.5L L3 naturally aspirated engine, delivering a maximum horsepower of 122 PS and a maximum torque of 153 Nm, with a trunk capacity of 511L.

4

3

Share

Under What Circumstances Should Car Spark Plugs Be Replaced?

Car spark plugs should be replaced under the following circumstances: when the top of the spark plug shows scars or damage, or when the electrode exhibits signs of melting or burning, these indicate that the spark plug is already damaged and should be replaced. During the replacement process, car owners can check for signs of burning and color changes in the spark plugs. Generally, resistance spark plugs should be replaced every 20,000 kilometers, platinum spark plugs every 40,000 kilometers, and iridium spark plugs every 60,000 to 80,000 kilometers. Spark plugs are crucial components of a gasoline engine's ignition system. They introduce high voltage into the combustion chamber and create a spark by jumping the electrode gap, thereby igniting the combustible mixture in the cylinder. A spark plug mainly consists of a terminal nut, insulator, terminal stud, center electrode, side electrode, and shell.

7

4

Share

How often should the Nissan Sylphy's radiator be refilled with water?

When the antifreeze coolant level in the Nissan Sylphy's radiator is found to be below the minimum mark (the normal coolant level should be between MIN and MAX), it should be refilled promptly. Additionally, the water in the radiator should be replaced every two years or after driving 30,000 to 40,000 kilometers. Vehicles with high usage frequency may require earlier replacement based on actual conditions. The Nissan Sylphy is a compact 4-door, 5-seater sedan featuring a MacPherson strut front suspension and a torsion beam rear suspension, with a front-engine, front-wheel-drive layout. The car comes with 205/60R16 tires, a 47L fuel tank, and dimensions of 4641mm in length, 1815mm in width, and 1450mm in height, with a wheelbase of 2712mm. It is equipped with a CVT continuously variable transmission.

16

4

Share

How to solve the issue of Lincoln MKC screen staying on after turning off the engine?

The solution to the Lincoln MKC screen staying on after turning off the engine is: 1. Locate and open the fuse box next to the battery; 2. Find the power distribution module relay on the back, identify the corresponding relay based on its position, and replace it with a new one. The Lincoln MKC is equipped with features such as automatic parking assistance, blind spot warning, lane keeping system, driver alertness sensor, and collision warning. Its body dimensions are 4552mm in length, 1864mm in width, and 1654mm in height, with a wheelbase of 2690mm. It comes with a 6-speed automatic transmission and is a 5-door, 5-seater SUV.

16

5

Share

What is the method for replacing the rear wheel ABS sensor on a Volkswagen Polo?

The method for replacing the rear wheel ABS sensor on a Volkswagen Polo is as follows: First, use a flat-head screwdriver to remove the cap at the center of the wheel. Do not lift the car with a jack at this stage. Instead, use a specialized wheel removal tool to slightly loosen the wheel bolts. After loosening the bolts, place the jack under the car to remove the ABS sensor and proceed with the replacement. The Volkswagen Polo is a compact 5-door, 5-seat hatchback with dimensions of 4053mm in length, 1740mm in width, and 1449mm in height, and a wheelbase of 2564mm. It is equipped with a 5-speed manual transmission and has a top speed of 190 kilometers per hour.

18

4

Share

How to Activate Sport Mode in BMW?

Does a CVT transmission require transmission fluid?

Where is the transmission oil filler port on the Ford Focus?

Under What Circumstances Should Car Spark Plugs Be Replaced?

How often should the Nissan Sylphy's radiator be refilled with water?

How to solve the issue of Lincoln MKC screen staying on after turning off the engine?

What is the method for replacing the rear wheel ABS sensor on a Volkswagen Polo?

How Many Points Are Deducted for Failing to Undergo Annual Inspection on Time?

How to Keep Warm Inside the Car in Winter?

How to Stop the Wiper in the Middle?

How to adjust the time on a Land Rover Discovery 4?