How to activate one-touch window lift for the 2021 Excelle?

1 Answers
Chad
07/25/25 12:44am
To activate the function, first start the vehicle. Press and hold the switch to lower the window completely for 5 seconds without releasing, then press and hold to raise the window to the top for 5 seconds before letting go. Once the learning process is completed, the feature will be enabled. After activating the auto-lock feature, the vehicle will automatically lock the doors while driving. This function typically activates when the speed exceeds 15 km/h. When the car is stationary, the gear lever is in position P, and the ignition is turned off, all doors and the trunk lid will automatically unlock.
Was this review help?
16
3
Share
More Forum Discussions

What are the main characteristics of off-road vehicles?

The main characteristics of off-road vehicles are four-wheel drive, higher chassis, tires with better grip, higher exhaust pipes, larger horsepower, and thick, sturdy bumpers. An off-road vehicle is a type of automobile specially designed for off-road use, primarily referring to vehicles that can be used on rough terrain. Off-road vehicles can not only adapt to various road conditions in the wild but also give people a sense of ruggedness and boldness. Many people also enjoy driving off-road vehicles in urban areas. Off-road vehicles are members of the military vehicle family, most of which have certain off-road driving capabilities. These vehicles can travel on very poor-quality roads or battlefields. To meet the needs of combat, a more capable military off-road vehicle has emerged.
5
3
Share

What are the benefits of 360-degree soft-wrapped floor mats?

360-degree soft-wrapped car floor mats are custom-made for each vehicle model with embedded installation, providing 360-degree coverage without dead corners. The mats are secured under the sliding rails to prevent slipping, completely covering all carpeted areas, reducing noise, and functioning like floor coverings—ensuring safety without interfering with the accelerator or brake pedals. More details are as follows: Definition: The 360-degree soft wrap is a vehicle-specific, split-edge embedded full-coverage car floor mat. It is precisely tailored according to the original vehicle data with a 1:1 streamlined design, exclusively made for specific car models—different models correspond to different styles of 360-degree soft wraps. Instead of a single-piece design, it consists of separate mats for the driver's seat, front passenger seat, and a shared rear-seat mat. Function: The unique edge-embedded design of the 360-degree aviation soft wrap ensures that all edges are tucked into the adjacent interior trim gaps, seamlessly integrating with the vehicle to completely block dust. The split-edge embedded design of the 360-degree soft wrap means each mat section is embedded into the vehicle's trim, preventing edges from lifting. This results in a clean, sleek, and secure fit, enhancing protection. Even with frequent movement, the mats stay in place, maintain their shape, and do not interfere with the vehicle's functions or operations, maximizing driving safety.
15
5
Share

What is the purpose of a crankshaft?

The crankshaft is a crucial component in an engine. It bears the force transmitted from the connecting rod and converts it into torque, which is then output through the crankshaft to drive other accessories on the engine. The crankshaft is subjected to the combined effects of centrifugal force from rotating masses, periodically varying gas inertial forces, and reciprocating inertial forces, resulting in bending and torsional loads on the crankshaft. To reduce the mass of the crankshaft and the centrifugal force generated during operation, the crankshaft journals are often made hollow. Oil holes are drilled on the surface of each journal to allow the introduction or extraction of oil for lubricating the journal surfaces. To minimize stress concentration, transition fillets are used at the connections between the main journals, crankpins, and crank webs.
1
5
Share

How to Match the Throttle of Audi A4L?

Audi A4L throttle matching method: It is necessary to use the throttle matching function under the guidance of a special computer for matching, which is difficult for individuals to operate. It is recommended to go to a 4S shop for processing. The throttle is a controllable valve that controls the air entering the engine. After the gas enters the intake pipe, it will mix with gasoline to form a combustible mixture, which then burns to form work. The Audi A4L is a car from Audi. In terms of body size, its length, width, and height are 4761 mm, 1826 mm, and 1439 mm respectively, with a wheelbase of 2869 mm. The Audi A4L has a fashionable and dynamic appearance, smooth lines, exquisite interior workmanship, rich configuration, good sound effects, spacious and practical space, good comfort, and a classic brand.
19
5
Share

What does loop recording mean for a dash cam?

Loop recording for a dash cam refers to the continuous video recording function of the device. Modern dash cams are equipped with memory cards, typically ranging from 4GB to 32GB in capacity. As the dash cam records in loop mode, the saved videos accumulate, gradually occupying the memory card's space. When the memory card reaches full capacity, the loop recording feature automatically deletes the oldest recorded videos (those furthest from the current time) to free up space. This ensures the continuous operation of the loop recording function, allowing the dash cam to store the most recent video footage.
6
4
Share

Should You Press the Clutch or the Brake First for Hill Start and Fixed-point Parking?

For hill start and fixed-point parking, you should press the brake first and then the clutch. If you press the clutch first, the car will be in neutral, losing engine control and causing it to roll backward. The higher the speed, the greater the inertia. Pressing the clutch first increases the car's inertia and risks neutral coasting, so you must press the brake first to reduce speed. When stopping at a red light, press the clutch first and then the brake. At lower speeds, the friction between the tires and the ground is greater, and pressing the brake first may stall the engine. During high-speed driving in the driving test (Subject 3), press the brake first and then the clutch. For steady or low-speed driving, press the clutch first and then the brake.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.