···
Log in / Register

How to Activate Mercedes-Benz Automatic Parking?

5 Answers
VonPaige
07/29/25 9:46pm

Mercedes-Benz automatic parking activation method: 1. Press the brake pedal; 2. Press the one-touch start button; 3. The dashboard lights up, and the vehicle's power is fully connected; 4. Press the automatic parking button located inside the car; 5. The car will then automatically perform the parking maneuver. Automatic parking refers to the car's ability to park itself without manual control. The Mercedes-Benz C260 is a B-segment sedan under the Mercedes-Benz brand. Taking the 2021 C260 Star Edition as an example, its body dimensions are 4704mm in length, 1810mm in width, and 1454mm in height, with a wheelbase of 2840mm. In terms of power, the 2021 C260 Star Edition is equipped with a 1.5T turbocharged engine plus a 48V mild hybrid system, delivering a maximum power of 135 kW and a maximum torque of 280 Nm.

Was this review help?
3
0
Share
McReed
08/15/25 9:13pm

I just tried the automatic parking feature on my Mercedes, and it's quite convenient. First, locate the parking button with a P symbol on the car, which is usually near the center console or by the gear shift; press it to activate the system while driving at low speed. The system will automatically scan for parking spaces, and once a detected spot is shown on the dashboard or screen, press the button again to confirm. The car will then steer itself into or out of the parking space—no need to worry about braking or anything; just keep your hands off the wheel and let it do its thing. I often use it in the city to save time and avoid scratches—parallel parking becomes super easy. Before starting, make sure your speed is below 30 km/h and the car body is clean to avoid sensor interference. Safety first: always keep an eye on the road and don’t rely entirely on the system. After a few tries, you’ll get the hang of it. Overall, it’s a handy little helper in daily life.

Was this review help?
20
4
Share
Expand All
MacKinsley
08/15/25 9:14pm

As a long-time Mercedes-Benz owner, activating the automatic parking is straightforward: press the parking assist button while driving at low speed, and the system will detect available parking spaces. Once prompted, confirm once, and the car will begin parking automatically. The entire process, including releasing the handbrake and adjusting the direction, only requires your supervision. I find it particularly useful in narrow streets, reducing the risk of parking errors. Ensure the environment is safe with no fast-moving traffic when using this feature; keeping the speed below 20 km/h after activation ensures better system stability. Remember to turn off the engine promptly after parking to prevent accidental operations. It’s a hassle-free tool for daily use.

Was this review help?
5
4
Share
Expand All
LouisFitz
10/17/25 5:44am

When driving my Mercedes, I often use the automatic parking feature, which is very user-friendly for beginners. The method is to lightly press the parking button while driving, usually located on the center console panel. Once the system is activated, slowly move forward to search for a parking space. When the indicator light turns on, it means a parking spot has been detected. Press the button again to confirm, and the car will automatically park itself. Throughout the process, the system controls the steering wheel and brakes, allowing you to focus on checking the rearview mirror to ensure no obstacles interfere. It helps me handle challenging parallel parking, especially during congested commutes, saving effort and worry. I recommend first reading the manual to familiarize yourself with the button locations and trying it out a few times in an open area.

Was this review help?
15
2
Share
Expand All
McMason
11/30/25 6:28am

Mercedes-Benz's automatic parking system is easy to activate: press the parking function button while driving at low speed to initiate detection; after scanning a parking space, the dashboard indicates the position, and with one confirmation, the vehicle executes the parking maneuver. The system automatically handles steering and braking; parking out is similar, with button presses to release steering. I'm interested in the technical details—it relies on ultrasonic sensors, and factors like dirt on the car body or uneven ground may affect accuracy; newer models also support remote-controlled parking. Remember to keep the speed below the specified limit and ensure sufficient ambient light for optimal performance.

Was this review help?
19
5
Share
Expand All
More Forum Discussions

Is It Serious for a Parked BMW X5 to Have Water Ingress of Over Ten Centimeters?

If a parked BMW X5 has water ingress of over ten centimeters but the engine is not submerged, it is generally not a serious issue. Steps to handle a flooded car: 1. Immediately cut off the car's power supply. If the car is submerged, powering it on can cause many components to burn out. 2. Shift the car's gear directly to neutral. Do not attempt to forcibly start a water-submerged engine, as this can cause significant damage. 3. Contact a 4S shop or nearby auto repair shop to arrange for a tow truck to take the car for repairs. Methods to deal with water ingress in a car: 1. Disconnect the negative terminal of the battery to prevent short circuits in the car's electrical components due to water. 2. Move the vehicle to a safe location. 3. Check whether water has entered the engine cylinders. 4. Inspect the condition of the fluids in the car's various systems. 5. Clean the fuse box, sensor connectors, and areas where water has accumulated in the car body.
3
5
Share

What is the wading depth of the BMW 5 Series?

The BMW 5 Series is a sedan with a wading depth of 25cm. Generally, the safe wading depth for most vehicles should not exceed half the height of the tires, and the absolute limit is not to exceed the engine air intake. If the air intake is below the water level during wading, water can be sucked into the engine cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshaft, etc.). Here are some precautions after driving through water: Orderly passage through flooded areas: If there are multiple vehicles, it's best to pass through the flooded area one by one. When several cars go through water together, the waves created by the leading vehicle can affect the passage of following cars. During wading, avoid shifting gears or accelerating/decelerating in the water. If the engine stalls in the water, do not attempt to restart the vehicle. Disable auto start-stop when wading: Most BMW models are equipped with an auto start-stop system. If driving through water, the vehicle may automatically shut off when braking. After the engine stops, water could enter the engine through the exhaust pipe. Releasing the brake would cause the vehicle to restart automatically, potentially leading to engine damage.
19
5
Share

Can ECO Mode Be Used Frequently?

You can frequently use the ECO mode in your car. ECO mode, also known as economy mode, is particularly effective for fuel savings when driving in congested urban traffic. Under ECO mode, engine carbon buildup is roughly the same as in normal driving mode, so ECO mode can be left on continuously. The main principle of ECO mode is not complicated. It involves comprehensive judgment and analysis of factors affecting fuel consumption during driving, such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel amount to supply the engine, effectively reducing fuel consumption compared to normal driving mode. Simply put, it controls engine speed with appropriate gear selection to minimize unnecessary fuel consumption. ECO is an abbreviation, with its Chinese translation representing Ecology (environmental protection), Conservation (energy saving), and Optimization (power). ECO mode is further divided into active ECO driving mode and passive ECO driving mode. When the ECO indicator light on the dashboard illuminates, it indicates that the vehicle's economy mode is activated. ECO mode can be either active or passive. The difference lies in the fact that active ECO mode has a dedicated button, allowing the driver to choose whether to enable it. When the driver presses the ECO mode button, the dashboard indicator light turns on, and the vehicle automatically adjusts settings such as throttle opening, transmission shift logic, and air conditioning output power. Passive ECO mode does not have a dedicated button. When the dashboard ECO indicator light turns on, it serves merely as a reminder. ECO mode automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will display the ECO indicator light accordingly. Most vehicles use active ECO driving mode, meaning there is a dedicated switch button. Therefore, ECO mode can be enabled during daily driving. However, it is unnecessary to activate ECO mode when driving over 120 km/h, during idling, in N/P gear, or in manual mode—especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of ECO mode but also affect performance. Additionally, ECO mode typically becomes ineffective under the following conditions: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, causing ECO mode to deactivate automatically. During idling or when in N/P gear or manual mode, ECO mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes delivering sufficient power to drive the vehicle, and ECO mode will not function in such scenarios.
3
0
Share

What are the reasons for frequently failing to shift from second gear to third gear?

In the process of shifting from second gear to third gear, the reasons for frequent failure are as follows: 1. Poor coordination between throttle and clutch: During upshifting, the throttle should be released first, then the clutch pedal should be pressed, or both operations can be performed simultaneously. It is essential not to shift while pressing the throttle during the shifting process. If the throttle is not fully released when shifting, it may cause shifting hesitation. 2. The clutch is not fully depressed: Before driving, it is necessary to feel the position and depth of the clutch. If the clutch is not fully depressed when shifting, it will not only cause shifting hesitation but also lead to gear grinding in the transmission. In severe cases, it can directly damage the gears inside the transmission.
10
5
Share

How many tons can a 750 tire bear?

750 tires can bear 10 to 12 tons. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling. They are usually mounted on metal rims to support the vehicle body, cushion external impacts, achieve contact with the road surface, and ensure the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing performance, traction performance, and cushioning performance. Additionally, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
5
1
Share

What is the BMW auto function?

BMW auto refers to the automatic air conditioning function. The following is a related introduction to the BMW auto air conditioning function: Automatic mode: This is the AUTO button. In this mode, once a temperature is set, the air conditioning will automatically activate when the vehicle is started, adjusting the interior temperature to the preset level in the shortest time possible. This is why there are often cases where the air conditioning blows at high intensity immediately after starting the car on hot summer days. In this mode, many mid-to-high-end models also feature automatic defogging functions, where the vehicle can automatically control the system based on fog sensors. Manual mode: On the air conditioning control panel, there are two fan symbols—one large and one small. The large symbol represents increasing the fan speed, while the small one represents decreasing it. To manually turn on the air conditioning, simply press the increase fan speed button.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.