How to Activate Cruise Control on the Lavida?

What Causes Large Gaps in New Tire Installation and Failure to Inflate?

Here are the reasons why a new tire may not inflate properly after installation: 1. The air inlet hole of the valve core is blocked: Unscrew the pressure nut, remove the valve core, take off the valve rubber tube, and use a thin wire or needle tip to clear out any dirt or debris. 2. The valve rubber tube has melted and blocked the valve core hole: After removing the valve core, clean it with gasoline or similar solvent, then use a thin wire to clear the blockage. Once confirmed to be clear, replace it with a new rubber tube. 3. The air passage is blocked: Extremely cold weather may cause moisture in the valve rubber tube to freeze into ice, blocking the air passage. Remove and heat it to melt the ice, then shake off any water droplets. 4. Issues with the air pump: Inspect the air pump or try using a different one.

8

1

Share

What are the reasons for the Changan CS35 air conditioner not cooling?

Changan CS35 air conditioner not cooling reasons: cooling fan not working, refrigerant pressure too high or too low, refrigerant leakage. The following are related introductions: 1. Cooling fan not working: The cooling fan not working also has a great impact on the heat dissipation of the condenser and should be replaced in time. 2. Refrigerant pressure too high or too low: Refrigerant, also known as Freon, is the cooling medium inside the air conditioner. There will be some natural loss of refrigerant in the air conditioning system. If the refrigerant pressure is too low, the cooling effect will become worse, and if the refrigerant pressure is too high, the air conditioner will sometimes cool and sometimes not. Therefore, the refrigerant pressure must be adjusted to the standard range, neither too low nor too high. 3. Refrigerant leakage: More common leakage points include air conditioning pipelines, evaporator boxes and other parts, and related components need to be replaced.

5

Share

Will an Automatic Transmission Car Move Without Pressing the Accelerator After Starting?

Under normal circumstances, when the vehicle is in D gear, it will move forward without pressing the accelerator. Below are the reasons why the car moves in D gear without pressing the accelerator: Related to Power: As long as the engine is running, pressing or not pressing the accelerator only affects the amount of power output, not whether power is output. As long as the engine has power, the car will move forward. Only when in neutral gear will the car stop moving forward. Related to Fuel Supply: Modern vehicles are fuel-injected cars. After engaging the gear and gently releasing the clutch, the car's computer will automatically adjust and increase the fuel supply. Even if the accelerator pedal is not pressed, fuel is actually being supplied, so the car will move on its own. Once steady, pressing the accelerator allows for normal driving.

7

2

Share

What is the difference between Honda CBF190R and CB190R?

The two models are essentially the same, with only differences in price, color, and some minor exterior details. Both are Honda motorcycles equipped with a 184cc engine that delivers a maximum power of 11.8 kW and a maximum torque of 15 Nm. Here is some additional information: 1. Exterior: The two models are highly similar, even down to the wheel spoke design, though slight visual differences may be noticed due to color schemes. Additionally, the paintwork quality differs—the Wuyang Honda CB190R has superior paintwork, giving it a slightly better overall finish. 2. Configuration: The two models are nearly identical in terms of features, including the gear indicator LCD display, single-channel ABS, upgraded rear fork, and exhaust system, all of which are present on both the CB190R and the CBF190R. 3. Performance: Both models use the same powertrain and Honda's PGM-FI fuel injection system. However, the CBF190R's engine parameters are slightly adjusted, offering marginally better performance, though the real-world difference is negligible. Overall, the similarities between these two models far outweigh their differences.

7

0

Share

What engine is equipped in the Fengxing F600?

Fengxing F600 is equipped with a 2.0-liter naturally aspirated engine across all models. This is an MPV model, and the engine of this vehicle offers strong power. Below are the relevant details about the Fengxing engine: 1. The 2.0-liter naturally aspirated engine in the Fengxing F600 has a maximum power of 108 kW, a maximum torque of 200 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4000 rpm. 2. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 6-speed manual transmission, which is standard across all models of this vehicle. 3. The front suspension of the Fengxing F600 uses a MacPherson independent suspension, while the rear suspension employs a leaf spring non-independent suspension. The dimensions of the Fengxing F600 are 5080 mm in length, 1770 mm in width, and 1915 mm in height, with a wheelbase of 3200 mm.

17

0

Share

Where to Check the Tire Pressure Monitoring in KAMIQ?

KAMIQ uses an indirect tire pressure monitoring system, which only provides alerts without displaying data. When the tire pressure is too high, the contact area between the tire and the ground decreases, increasing the pressure on the tire and affecting its grip. Below are related details: 1. Direct Tire Pressure Monitoring: This system uses pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts when the tire pressure is too low or there is a leak. 2. Indirect Tire Pressure Monitoring: The working principle of indirect tire pressure monitoring is that when the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the differences in rotational speed between tires, the system monitors tire pressure. The indirect tire pressure alert system essentially relies on calculating the rolling radius of the tires to monitor pressure.

4

2

Share

How to Activate Cruise Control on the Lavida?

What Causes Large Gaps in New Tire Installation and Failure to Inflate?

What are the reasons for the Changan CS35 air conditioner not cooling?

Will an Automatic Transmission Car Move Without Pressing the Accelerator After Starting?

What is the difference between Honda CBF190R and CB190R?

What engine is equipped in the Fengxing F600?

Where to Check the Tire Pressure Monitoring in KAMIQ?

Is the insurance label still required to be affixed on cars?

How many powertrain options does the Skoda Kodiaq GT SUV have?

What are the contents of the Subject 3 driving test?

Which Country Produces Land Rover Cars?