How to Activate Cruise Control on the Lamando?
4 Answers
Lamando's cruise control can be activated using the buttons on the left side of the steering wheel. Here are the specific steps to activate cruise control on the Lamando: 1. Press the O/I icon button. 2. Accelerate to your desired speed. 3. Press the SET button to set the cruise control speed. 4. Adjust speed: Press the +/- button to increase or decrease speed by 10KM/H. 5. CNL cancel button: To cancel cruise control, press the O/I button or apply the brakes. 6. RES button: Resume the set cruise control speed. 7. Pressing the brake pedal on the Volkswagen Lamando will immediately deactivate cruise control.
I've been driving the Lamando for several years, and the cruise control is really handy, perfect for highway driving—saving fuel and effort. First, make sure the car is moving at a speed of at least 30 km/h. Locate the control stalk on the left side of the steering wheel, with the cruise icon button on top. Press it to activate the system, and a prompt will light up on the dashboard. Then, accelerate to your desired speed, say 60 or 80 km/h, and gently push the stalk upward to set the current speed as the cruise speed. After that, release the accelerator—no need to keep your foot on it—the car will maintain a steady speed on its own. For minor speed adjustments, push the stalk up to accelerate or pull it down to decelerate. Pressing the brake or the cancel button will temporarily deactivate the system. I usually use it on highways, especially during long trips, as it reduces fatigue. But avoid using it in rain or snow to prevent skidding accidents. Regularly check your car’s condition to ensure the cruise control functions properly—safety always comes first.
As a practical car owner who enjoys helping friends with small issues, I'd like to share some tips on activating the cruise control in the Lamando. After starting your car and driving normally, wait until your speed stabilizes around 30 km/h. Look for a button on the steering wheel labeled with cruise control or a similar symbol, then gently press it to enter standby mode. Next, accelerate to your desired speed—say 60 km/h in the city or 100 km/h on the highway—and press the set button to lock in that speed. The system will then engage fully. From there, you only need to steer while the system manages acceleration; use the +/- buttons to adjust speed as needed, or cancel with the brake or a designated button. I often use this feature on weekend trips—it's much more relaxing than manual driving and helps reduce fuel consumption. A quick reminder: make sure road conditions are stable before activating, avoid using it on sharp turns or steep slopes, and always prioritize safety. If any issues arise, don't panic—just refer to the manual on hand.
I often drive the Lamando to commute, and the cruise control makes commuting easier. After starting the car and accelerating above 30 km/h, there is usually a cruise switch on the right side of the steering wheel—press it to activate (the light will turn on). Then, reach your desired speed, such as 50 km/h, and lightly press the set button to lock it in. Release the accelerator, and the car will automatically maintain the speed. After that, use the directional buttons to adjust speed up or down, and press the corresponding button to cancel. This feature is super practical, especially on highways, as it prevents foot fatigue. I recommend beginners practice a few times to get familiar with the operation. Regular vehicle maintenance ensures the cruise system works more reliably. If it malfunctions unexpectedly, stop and check the fuse or battery. Overall, it’s a hassle-free tool, but only use it in good weather and on safe roads.
