How to activate cruise control on the Borgward BX5?

1 Answers
Cavalcanti
07/30/25 1:56am
To activate cruise control on the Borgward BX5: 1. Turn on the cruise control switch and accelerate to your desired speed; 2. Press the set button to lock the current speed. The Borgward BX5 is a compact SUV under the Borgward brand, with exterior dimensions of 4490mm in length, 1877mm in width, and 1675mm in height, with a wheelbase of 2685mm. It is equipped with a 1.4T turbocharged engine paired with a 6-speed automatic transmission, delivering 150 horsepower and a maximum power output of 110 kW at 5500 rpm.
Was this review help?
18
3
Share
More Forum Discussions

What series of car is Lynk & Co?

Lynk & Co is a domestic car brand, and it is a high-end automotive brand under Geely Auto. Here are some relevant details about Lynk & Co: 1. Specific reasons: The Lynk & Co 03 is equipped with two engines, a 1.5T and a 2.0T, both of which have high and low power versions. Among them, the high-power 2.0T engine is only installed in the performance model (Lynk & Co 03+), paired with an Aisin 8-speed automatic transmission and equipped with an all-wheel-drive system. It delivers a maximum horsepower of 254Ps and a maximum torque of 350N·m, which is 64 horsepower and 50N·m higher than the low-power version, making it more powerful but also relatively higher in fuel consumption. 2. Relevant information about Lynk & Co: The actual fuel consumption performance of the Lynk & Co 03 does not have strong competitiveness and is even slightly on the higher side. Its highway fuel consumption is around 7L/100km, urban fuel consumption is around 10L/100km, and the combined average fuel consumption is 8L/100km. Among its peers (compact sedans), its fuel consumption level is considered medium to high.
1
0
Share

What is the license class for passenger cars?

The manual transmission passenger car license is C1, while the automatic transmission passenger car license is C2. The permitted vehicle types for a small vehicle C1 license are: small and micro passenger vehicles, as well as light and micro cargo vehicles; light and micro special operation vehicles, and it also allows driving vehicle types permitted under C2, C3, and C4 licenses. The permitted vehicle types for a small automatic transmission vehicle C2 license are: small and micro automatic transmission passenger vehicles; small and micro automatic transmission passenger vehicles. The current driver's licenses are divided into 16 categories: A1 license, A2 license, A3 license, B1 license, B2 license, C1 license, C2 license, C3 license, C4 license, C5 license, D license, E license, F license, M license, N license, P license.
14
2
Share

What is the standard tire pressure for summer?

The standard tire pressure for summer is between 2.2 and 2.4 bar. The standard tire pressure for your car can be found on the sticker near the B-pillar or C-pillar of the door or in the vehicle's user manual. Tire pressure monitoring is an automatic real-time monitoring of tire pressure while driving, alerting you to tire leaks and low pressure to ensure driving safety. Tire pressure refers to the air pressure inside the tire, which is essentially the 'blood pressure' of the car. The level of tire pressure plays a crucial role in the performance and power of the vehicle. Air pressure is the lifeline of the tire; both too high and too low pressure will shorten the tire's lifespan. Low pressure increases tire deformation, leading to cracks on the tire side, causing flexing movements that result in excessive heat, accelerating rubber aging, fatigue of the cord fabric, and breakage of the cords. It also increases the tire's contact area with the ground, accelerating wear on the tire shoulders. High pressure causes excessive stretching and deformation of the tire cords, reducing the tire's elasticity and increasing the load on the car while driving. In case of impact, it can lead to internal cracks and blowouts. Additionally, high pressure accelerates wear on the tire tread and reduces its resistance to punctures.
2
1
Share

How to deal with the abnormal noise of Wuling Hongguang S transmission?

Wuling Hongguang S transmission abnormal noise treatment methods are: 1. When the transmission makes abnormal noise in neutral, and the noise disappears after depressing the clutch, it is caused by the wear or looseness of the front and rear bearings of the transmission first shaft or the constant meshing gear noise. For severely damaged bearings, they should be sent to the repair shop for maintenance or replacement in time; 2. If there is a dull sound without rhythm and the sound disappears when holding the gear lever, it is caused by the wear of the gear shift fork of the gear or the wear of the lower end working surface of the gear lever. The transmission should be removed for maintenance. Wuling Hongguang S is a micro van with a body length, width and height of 4390mm, 1660mm and 1750mm respectively, a wheelbase of 2720mm, and a unibody structure.
9
3
Share

What are the engine specifications of the Cadillac XTS?

Cadillac XTS is equipped with a 2.0-liter turbocharged four-cylinder engine across the entire lineup, delivering a maximum power of 198 kW and a peak torque of 353 Nm. The engine reaches its maximum power at 5,300 rpm, while the peak torque is available between 2,000 and 5,000 rpm. This engine features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. It is paired with a 6-speed automatic transmission with manual shift mode. The Cadillac XTS is a newly positioned full-size luxury sedan from Cadillac, with dimensions of 5,131 mm in length, 1,852 mm in width, and 1,501 mm in height, and a wheelbase of 2,837 mm.
2
0
Share

When to Use Vehicle Anti-Skid System?

Vehicle anti-skid systems are used during rainy days, icy road conditions, or snowy weather to effectively prevent the risk of skidding while driving. Typically, the anti-skid system in a vehicle is enabled by default and does not require manual activation. If it is turned off, it can be reactivated by pressing the EPS button. The Electronic Stability Program (ESP) is a general term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the vehicle reaches its dynamic limits. The electronic stability program improves vehicle safety and handling. By analyzing vehicle driving state information from various sensors, the ESP system issues corrective commands to ABS, EBD, etc., to help maintain dynamic balance.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.