How to Activate Cruise Control in the Elysion?

1 Answers
LaBrantley
07/25/25 3:32pm
Press the "CRUISE" button on the right side of the steering wheel, and the display will show this English text, indicating the program is activated. Accelerate to over 40 km/h, then press the "SET" button to lock the speed, after which you can release the accelerator. While the speed is locked, each press of the "SET" button slightly decreases the speed by about 2 km/h, and each press of the "RES" button slightly increases the speed by about 2 km/h.
Was this review help?
7
5
Share
More Forum Discussions

What to Do If a Motorcycle Invoice Is Lost?

Consumers who have lost the motor vehicle sales invoice should obtain a copy of the sales invoice stub from the motor vehicle sales unit. Go to the local tax authority where the motor vehicle seller is located to have it stamped for confirmation and registered for record. Consumers can then proceed with the relevant procedures using the reissued motor vehicle sales invoice.
14
4
Share

What engine does the SWM X7 use?

SWM X7 is equipped with a 1.5T turbocharged engine and a 1.8L naturally aspirated engine. The 1.8L naturally aspirated engine has a maximum output power of 137 horsepower and a peak torque of 185 N·m. SWM X7 is a 7-seat SUV model under SWM Motors, with body dimensions of 4710mm in length, 1855mm in width, and 1770mm in height, and a wheelbase of 2750mm. In terms of appearance, the front face of the SWM X7 features a 16-column Roman-style front grille, eagle-eye headlights with a classic design, and the rear exhaust adopts a dual-tailpipe design commonly used in sports cars.
9
2
Share

What is the process of buying a used motorcycle?

"Motor Vehicle Registration, Transfer, and Change Registration Application Form", a copy of the motor vehicle owner's identity proof, the motor vehicle registration certificate. Old driving license, old motor vehicle license plate, "Used Motor Vehicle Sales Uniform Invoice".
7
5
Share

Why Does the Car Brake Squeak?

The reasons for car brake squeaking: 1. When the vehicle is stationary, a slight squeaking sound occurs upon gently pressing the brake pedal, which is due to the return spring of the brake light switch on the pedal. 2. When the vehicle is moving at low speed and the brake is applied, a noticeable squeaking sound may come from the brake disc area. For new cars or after replacing brake pads, repeated high-pitched squealing noises often occur because the brake disc surface becomes mirror-smooth after use. At this point, friction between the brake pad surface and the mirror-smooth brake disc creates a hardened layer. The friction between this hardened layer and the mirror-smooth brake disc easily produces squealing sounds. If only the brake pads are simply polished to remove the hardened layer, the squeaking may stop temporarily, but since the brake disc remains smooth, the hardened layer will quickly reform on the brake pad surface, causing the noise to persist.
4
3
Share

Why does the engine idle roughly during cold starts?

The reasons for rough idling during cold starts are: 1. Faulty coolant temperature sensor: If the engine temperature is -10°C during a cold start, but the sensor reports 10°C to the ECU, the ECU will inject fuel based on the 10°C condition, resulting in insufficient fuel supply and natural shaking. 2. Engine carbon buildup: Carbon deposits can lead to reduced fuel injection, failing to ensure adequate power output, inevitably causing shaking. 3. Aging vehicle: If the car has been used for many years, components nearing the end of their service life may produce shaking. 4. Insufficient ignition energy: During cold conditions, the temperatures inside the engine, fuel, and lubricants are all low, requiring more fuel injection during cold starts to meet power demands. Larger spark plug gaps result in weaker ignition energy. Poor fuel atomization at low temperatures demands higher ignition energy. Prolonged use can enlarge spark plug gaps, reducing ignition energy and affecting power output, leading to shaking. Additionally, aging ignition coils, deteriorated spark plug high-voltage wires, or electrical leaks can also decrease ignition energy.
16
0
Share

How to Unlock the Speed of Luyuan Electric Scooter?

Luyuan electric scooters are designed to comply with national standards, with the speed limited to 20KM/H. To unlock the speed, follow these steps: turn the throttle to the maximum while holding the brake lever and keep them in that position. After turning on the scooter, count to 8 seconds, then release both the throttle and brake lever. Turn off the scooter, and then turn it on again to remove the speed limit.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.