How to Activate Brake Assist?

1 Answers
McCollin
07/28/25 2:55pm
Brake assist is automatically activated and does not require manual activation by the driver. It is enabled by default as soon as the vehicle starts. The brake assist system includes electronic brake assist and brake force assist systems, which can increase braking force during emergency braking by assessing the driver's braking action strength and speed, thereby reducing stopping distance. Functions of brake assist: 1. Prevents wheel lock-up when braking; 2. When the vehicle experiences wheel slip, rollover, or loss of tire traction, it reduces engine speed while applying braking control to the wheels to prevent dangers caused by loss of vehicle control.
Was this review help?
20
0
Share
More Forum Discussions

What are the gear positions of the Haval H6 third generation?

The Haval H6 automatic transmission has the following gear positions: P (Park), D (Drive), M (Manual), N (Neutral), and R (Reverse). Below is a detailed introduction to each gear position: 1. P (Park) is the parking gear: When the gear selector is in the P position, the transmission is internally in neutral, but the output shaft is mechanically locked. At this time, the car will remain stationary even without pressing the brake, and it is generally used for long-term parking. When shifting into P, the car must be completely stationary. Do not shift into P while the car is still moving, and always engage the parking brake. When parking on a slope, engage the parking brake first before shifting into P. 2. R (Reverse) is the reverse gear: When the gear selector is in the R position, the transmission's output shaft rotates in the opposite direction to the engine, allowing the car to move backward. When shifting into R, the car must be completely stationary. Do not shift into R while the car is still moving. 3. N (Neutral) is the neutral gear: When the gear selector is in the N position, the gears inside the transmission are freewheeling, and the clutch is disengaged, resulting in minimal load on the transmission. N is generally used for short stops, such as waiting at a traffic light, or when the car is being towed. 4. D (Drive) is the driving gear: When the gear selector is in the D position, the gears inside the transmission automatically shift between the lowest and highest gears based on factors such as vehicle speed and throttle opening, following preset shifting patterns. In most cases, D can be used for driving.
9
3
Share

What are the reasons for the engine yellow light coming on and lack of power when accelerating?

The reasons for the engine yellow light coming on and lack of power when accelerating include the following aspects: 1. Poor fuel quality: Using low-quality gasoline from non-standard gas stations can cause insufficient combustion of the air-fuel mixture during engine operation, triggering the engine fault light. This does not affect driving safety but may harm the engine to some extent. 2. Oxygen sensor failure: Modern cars are equipped with two oxygen sensors, one before and one after the three-way catalytic converter. The front oxygen sensor detects the air-fuel ratio under different engine conditions, and the ECU adjusts fuel injection and ignition timing based on this signal. The rear sensor mainly monitors the performance of the catalytic converter. Damage or loose connections in the oxygen sensor can cause the mixture to be too lean or too rich, leading to the fault light. 3. Airflow sensor failure: The airflow sensor measures the intake air volume and converts it into an electrical signal sent to the ECU, which determines the optimal fuel injection amount. If the sensor or its circuit fails, the ECU cannot receive correct intake data, disrupting fuel control and causing improper engine operation. 4. Spark plug carbon buildup: Carbon deposits on spark plugs can cause poor engine performance, including difficulty starting, unstable idle, poor acceleration, backfiring, excessive emissions, and increased fuel consumption. 5. Engine knocking: Symptoms include weak acceleration, excessive engine noise, and, in severe cases, knocking sounds. 6. Engine misfire: A misfiring engine leads to increased fuel consumption, black smoke, weak acceleration, severe vibration, louder engine noise, and frequent stalling. Misfires are often caused by issues in the ignition or fuel supply systems, such as spark plug carbon buildup or a faulty high-pressure fuel pump.
4
5
Share

What tires does the Envision use?

The Buick Envision uses Bridgestone tires. Here is some relevant information about the Envision: 1. Vehicle dimensions: The Envision is a midsize SUV under the Buick brand, with a length/height/width of 4686/1839/1686 (1691) mm and a wheelbase of 2750 mm. 2. Powertrain: The Buick Envision offers a 2.0T-SIDI direct-injection turbocharged engine paired with a 9-speed HYDRA-MATIC intelligent transmission, and a 1.5T-SIDI direct-injection turbocharged engine paired with a 7-speed DCG-PLUS intelligent dual-clutch transmission combination.
17
5
Share

What type of vehicle is the Nezha N01?

Nezha N01 is a domestically produced small pure electric SUV, featuring a single-motor configuration. The motor of this vehicle delivers a maximum power of 55kW and a maximum torque of 175Nm. Below are some key details about the Nezha N01:1. Front and Rear Suspension: The Nezha N01 is equipped with ternary lithium batteries across all variants, known for their relatively high energy density and lighter weight. The front suspension utilizes a MacPherson independent suspension, while the rear suspension employs a trailing arm non-independent suspension.2. New Nezha N01: The Nezha N01 is the first mass-produced model under the "Nezha Auto" brand owned by Zhejiang Hezhong New Energy Automobile Co., Ltd. The mid-cycle facelift version, the 2020 Nezha N01, has been officially launched.
2
1
Share

What is the fuel consumption per 100 kilometers for the Kia K5?

The fuel consumption per 100 kilometers for the Kia K5 is 5.6 liters. Below is an introduction to the Kia K5: 1. Vehicle Positioning: The Dongfeng Yueda Kia K5 is a high-end sports sedan designed by Peter Schreyer, positioned as a luxury four-door coupe. 2. Powertrain: The Kia K5 is a mid-size sedan equipped with two engines: a 2.0-liter naturally aspirated engine and a 1.6-liter turbocharged engine. 3. Body Dimensions: The Kia K5 measures 4845mm in length, 1835mm in width, 1455mm in height, with a wheelbase of 2795mm, providing an exceptionally spacious interior due to its long wheelbase.
13
2
Share

Where to Set the Ambient Lighting in Cayenne?

The ambient lighting in the new Cayenne requires a specialized computer to set the remote key. Please visit an official 4S store for a free setup. Below is some relevant information about the Cayenne: 1. Positioning: The Porsche Cayenne is an SUV model. The plug-in hybrid version, Cayenne S E-Hybrid, comes with green brake calipers and is equipped with 265/50R19 Michelin Latitude Sport low rolling resistance tires. 2. Exterior: The Porsche Cayenne features a stylish and sporty design, with smooth and complete overall lines that exude a strong athletic vibe. Users have praised its appearance as "tall and imposing, with a front face that looks very commanding."
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.