How to activate and use ETC?

1 Answers
CassandraAnn
07/29/25 7:57pm
The method to activate and use ETC is: Insert the ETC card into the ETC electronic tag, and the display of the ETC card account balance indicates successful activation. ETC is the Electronic Toll Collection system, which allows vehicles to pass through highway or bridge toll stations without stopping to pay the fees. The method to install ETC in a vehicle is: 1. Check the ETC card and electronic tag for any damage. Press the anti-removal button on the back of the electronic tag, and it will briefly light up. If the OLED screen displays 'Tag Invalid, Please Insert Card,' it means the device is functioning normally; 2. Clean the front windshield, peel off the protective film of the electronic tag, stick it to the installation position, and press it firmly for about 2 to 3 minutes; 3. Insert the ETC card with the front facing the driver and the back facing the windshield, and insert the chip part into the electronic tag device.
Was this review help?
2
2
Share
More Forum Discussions

Can a Catalytic Converter Be Used After Being Soaked in Water?

A catalytic converter can still be used after being soaked in water. Relevant information about catalytic converters is as follows: 1. Catalytic Converter: The core component of a catalytic converter is a porous ceramic material installed in a specially designed exhaust pipe. It is called a "carrier" because it does not participate in the catalytic reaction itself but is coated with precious metals such as platinum, rhodium, palladium, and rare earth coatings. It is the most important external purification device installed in a vehicle's exhaust system. 2. Function: The catalytic converter plays a crucial role in the exhaust purification system of gasoline vehicles by converting harmful gases such as carbon monoxide (CO), hydrocarbons (HC), and nitrogen oxides into non-toxic and harmless substances like water, carbon dioxide (CO2), nitrogen (N2), and oxygen (O2) through oxidation and reduction reactions.
9
2
Share

Can a new car without license plates drive on the highway?

New cars without license plates or temporary license plates are not allowed to drive on the highway. Additional information is as follows: 1. Legal Basis: According to Article 8 of the "Road Traffic Safety Law," the state implements a registration system for motor vehicles. Motor vehicles can only be driven on roads after being registered by the traffic management department of the public security authorities. For motor vehicles that have not yet been registered but need to be temporarily driven on roads, temporary license plates must be obtained. Under the new traffic regulations, motor vehicles without license plates are strictly prohibited from being driven on roads. New cars must display either regular license plates or temporary license plates to be driven legally. 2. Temporary License Plates: Temporary license plates are paper motor vehicle license plates issued to allow temporary road use, also known as temporary driving permits. These are temporary vehicle movement certificates issued by the vehicle management department of the public security authorities for newly purchased vehicles before formal registration.
3
3
Share

Can the BYD Han be Charged on Rainy Days?

BYD Han can be charged on rainy days, but the plug must not be exposed to rain. Here are some precautions to take when charging in heavy rain: 1. Cover the charging port: Use an umbrella to shield the exposed charging port. Once the plug is inserted, it will provide some waterproofing. 2. Avoid electric leakage: When charging in the rain, first connect the vehicle part and then connect to the charging pile. This prevents electric leakage, as the plug and socket on the vehicle side will be connected live to avoid electric shock. 3. Parking position: Try to choose a higher ground position. If parked in a low-lying area, prolonged water accumulation may cause the battery or charging port to be submerged.
18
4
Share

Is the Lavida from FAW or SAIC? What about the Bora?

The Lavida belongs to SAIC Volkswagen, while the Bora belongs to FAW Volkswagen. Below are the relevant introductions about the Bora and Lavida: 1. Power: The Bora is equipped with a 1.2L turbocharged 4-cylinder EA211-DLS engine, paired with a 7-speed dual-clutch transmission. The Lavida is equipped with a 1.4L turbocharged 4-cylinder EA211-DJS engine, also paired with a 7-speed dual-clutch transmission. 2. Body dimensions: The Bora measures 4663mm in length, 1815mm in width, and 1462mm in height, with a wheelbase of 2688mm. The Lavida measures 4670mm in length, 1806mm in width, and 1474mm in height, also with a wheelbase of 2688mm.
6
1
Share

Difference Between Emergency Braking and Parking Brake?

Emergency braking and parking brake differ in the following aspects: 1. Different purposes: Emergency braking aims to bring the vehicle to a stop within the shortest possible distance during emergencies; the parking brake is designed to provide resistance to prevent the vehicle from rolling on slopes and maintain a stationary state when the vehicle is already at rest. 2. Different operations: Emergency braking typically involves using the foot brake (brake pedal) to decelerate the vehicle until it stops; the parking brake usually employs the parking brake mechanism (handbrake) to keep the vehicle stable after stopping, with the common handbrake position located where the driver's right hand naturally rests. 3. Different resistance levels: Emergency braking generates greater resistance because the vehicle needs to transition from a moving state to a stationary state under the effect of resistance; the parking brake produces less resistance than emergency braking, as it only needs to maintain the vehicle's stationary position without rolling.
5
3
Share

What are the reasons for the central control display screen not lighting up in the Mercedes-Benz C260?

The reasons for the central control display screen not lighting up in the Mercedes-Benz C260 are as follows: 1. System defects in the central control: Due to incompatibility between some brands and models of mobile phone Bluetooth, third-party software, and the host software, the central control screen may go black when connecting or playing songs. In this case, the central control system usually restores normal operation after a reboot. 2. Power circuit failure: Visit a 4S shop for an upgrade. 3. Outdated central control system firmware: If the central control system is not updated and upgraded in time, it may also cause the screen to go black. The owner only needs to take the car to a 4S shop for an upgrade to update to the latest firmware to resolve the issue. 4. Plugging items into the USB port in the central armrest may cause the screen to go black.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.