How to activate an ETC card?

1 Answers
OFrancisco
07/28/25 2:15pm
Methods to activate an ETC card: 1. Install the ETC device and card on the front windshield and follow the relevant ETC official account; 2. A page will pop up, click on online activation and enter the vehicle and owner's information; 3. Turn on Bluetooth, search and activate via Bluetooth, then upload photos of the front and front face of the vehicle; 4. Insert and remove the ETC card from the device twice consecutively to make the display show the Bluetooth connection message, ensuring a successful search; 5. Once the activation success message automatically appears, it can be used normally. The ETC electronic tag is uniquely associated with the registered vehicle—one card, one vehicle, one tag, dedicated to a specific vehicle. Using an ETC card bound to another vehicle is invalid.
Was this review help?
7
4
Share
More Forum Discussions

How many liters of engine oil does the BMW X3 require?

The BMW X3 requires 4.8L of engine oil. It is recommended to use full synthetic oil from brands such as Mobil, Shell, or Castrol for the BMW X3. Since this vehicle is equipped with a turbocharged engine, higher-performance oil is necessary to provide adequate protection. There are three types of engine oil available for vehicles: mineral oil, semi-synthetic oil, and full synthetic oil. The BMW X3 is an SUV model that introduces the new concept of a Sport Utility Vehicle (SUV) and is equipped with BMW's patented xDrive intelligent all-wheel-drive system. The dimensions of the BMW X3 are 4648mm in length, 1881mm in width, and 1661mm in height, with a wheelbase of 2810mm.
12
2
Share

Where is the gear shift in a Mercedes-Benz?

The following describes the specific location of the gear shift in a Mercedes-Benz: 1. Some Mercedes-Benz models use a column shifter design. If it is a column shifter, the gear lever is located below the right side of the steering wheel; 2. Some Mercedes-Benz sports cars still adopt the traditional gear lever design, with the gear lever positioned between the driver and front passenger seats. Here is some information about Mercedes-Benz: 1. Mercedes-Benz is a world-renowned German automobile brand headquartered in Stuttgart. 2. Mercedes-Benz is famous for its high-quality, high-performance automotive products. In addition to premium luxury cars, the company is also one of the world's most renowned manufacturers of buses and heavy-duty trucks.
11
1
Share

What is the oil specification for the Envision?

The oil specification for the Envision is 5W30 fully synthetic oil, and approximately 5.4L is required during maintenance. According to the Buick Envision's maintenance manual, maintenance is required every 5,000 kilometers. The Envision models currently on sale are the 2019 models, divided into National V and National VI versions. The Envision has dimensions of 4686mm in length, 1839mm in width, and 1660mm in height, with a wheelbase of 2750mm. The Envision is available in both two-wheel drive and four-wheel drive versions, featuring a front-engine four-wheel-drive layout with an on-demand four-wheel-drive system. The front and rear brake types are ventilated disc and disc, respectively, with an electronic parking brake.
18
5
Share

What Causes Inner Tire Wear?

Tire inner wear is primarily caused by misaligned four-wheel positioning parameters. Here are some methods to protect your tires: 1. Pay attention to tire pressure: Both over-inflation and under-inflation can cause abnormal tire wear and shorten tire lifespan. During harsh weather conditions in winter and summer, adjust tire pressure regularly based on recommendations from maintenance service stations. 2. Avoid sudden acceleration: In daily driving, avoid sudden acceleration. Rapid starts from a stationary position cause intense friction between the tires and the road, accelerating tread wear. 3. Reduce hard braking: Hard braking exacerbates localized tread wear and can lead to tire bulging or delamination. Use coasting to slow down more often and minimize brake usage, especially emergency braking. 4. Maintain steady speed: Drive at a controlled, steady speed to avoid or reduce the need for emergency braking, thereby minimizing tire wear. When stopping during a trip or at a station, develop the habit of safely coasting to a stop.
18
2
Share

How to Replace the Remote Battery for Nissan Sylphy?

The method to replace the remote battery for Nissan Sylphy is as follows: Use a flat-head screwdriver to pry open a small gap from the side of the key, then continue prying along the gap. Apply slight force to separate the remote key, remove the old battery, and insert the new one. Finally, align the key cover and press it firmly into place. Taking the 2021 Classic 1.6XE Manual Comfort Edition Sylphy as an example, this car is a compact vehicle with dimensions of 4631mm in length, 1760mm in width, and 1503mm in height, and a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122ps, a maximum torque of 155Nm, and a maximum power of 90kW.
9
0
Share

What engine does the Dongfeng Fengguang 580 use?

Dongfeng Fengguang 580 uses a 1.5T turbocharged and a 1.8L naturally aspirated engine, paired with a 6-speed manual transmission, 5-speed manual transmission, and continuously variable transmission. The Dongfeng Fengguang 580 is a 5-door, 7-seater midsize SUV with a body length, width, and height of 4715mm, 1845mm, and 1715mm respectively, and a wheelbase of 2780mm. The front suspension of the Dongfeng Fengguang 580 is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. The tire specification is 225/60R17, the drivetrain is front-wheel drive, and the body structure is a 5-door, 7-seater SUV.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.