How to Activate a Truck ETC Card?

1 Answers
AubreyFitz
07/29/25 10:30pm
Truck ETC activation method: Insert and remove the ETC card twice consecutively until the electronic tag screen displays 'Bluetooth On'. If 'Tag Invalid' appears when inserting and removing the card twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, you can directly press the button on top of the electronic tag to enable Bluetooth. Turn on your phone's Bluetooth, open the corresponding mobile app (usually a download QR code is available on the electronic tag), and enter the device activation interface. Click on 'Device Connection' and wait patiently for the 'Connection Successful' prompt. Once connected, upload a photo of the vehicle's front to complete activation. ETC working principle: Through dedicated short-range communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, using computer networking technology for backend settlement processing with the bank, the system achieves the purpose of allowing vehicles to pass through highway or bridge toll stations without stopping while still paying the fees.
Was this review help?
19
5
Share
More Forum Discussions

How to deal with the TC slash yellow light on the dashboard?

When the TC slash yellow light on the car dashboard comes on, it indicates that the vehicle's traction control system is turned off. Simply turning on the traction control system will make the yellow light go off. Here are the specific details about the car traction control system: 1. Function of the traction control system: It mainly helps to effectively maintain driving force and prevent the driving wheels from spinning when the vehicle starts or accelerates on slippery roads, ensuring driving safety to a certain extent. 2. Impact of turning off the traction control system: Turning off the system does not affect driving, but when the wheels slip, the engine will not reduce power output, and the driving wheels may spin on slippery roads. As an auxiliary driving system, it helps with driving stability, so it is generally recommended not to turn off the traction control system under normal driving conditions. However, if the vehicle is stuck in mud, sludge, or snow, the owner can turn off the traction control system to increase the engine power output to the wheels and help the vehicle get out of the predicament of being unable to move forward.
20
1
Share

What to Do If the Hood Won't Open?

The hood release lever is typically located under the dashboard on the driver's side. After pulling it, locate the secondary latch near the hood to open it. Below are the key functions of a car hood:1. Airflow Management: For high-speed vehicles, airflow resistance and turbulence around the vehicle significantly impact trajectory and speed. The hood's design optimizes airflow direction relative to the car's movement, reducing resistance. Proper airflow redirection converts drag into beneficial downforce, enhancing front-wheel traction and driving stability.2. Component Protection: The hood safeguards critical components including the engine, electrical systems, fuel lines, braking system, and drivetrain. Its reinforced structure protects against impacts, corrosion, rainwater, and electromagnetic interference, ensuring proper vehicle operation.3. Safety Shield: Operating in high-temperature, high-pressure, and flammable conditions, engines risk explosions, fires, or leaks from overheating or component failure. The hood acts as a protective barrier against such hazards.
18
3
Share

What should the temp be set to in a car?

The temp in a car should be set between 18°C and 25°C. Here are the specific details about car air conditioning systems: 1. Temp button: The 'temp' in a car refers to temperature, and you can adjust the car's temperature via this button. The temp button is usually located on the car's center console, and in some models, it can also be found near the rear air vents, allowing independent control of the rear air conditioning temperature. Rear independent air conditioning is typically only available in mid-to-high-end models. 2. Air conditioning system structure: The car air conditioning system includes cooling, heating, and ventilation devices. The structure of the air conditioning system is relatively simple, making it easy for the driver to operate. In some mid-to-high-end models, the car uses an automatic air conditioning system, which can adjust the interior temperature automatically with a single button. 3. Manual air conditioning: Lower-end models are equipped with manual air conditioning, which requires adjusting the temperature, fan speed, and airflow direction via control panel buttons. Both adjustment methods work on the same principle, but the automatic air conditioning program is more complex. Automatic air conditioning adjusts the fan speed and temperature based on external sensors to maintain the optimal interior temperature.
10
3
Share

How to Adjust a Heavy Steering Wheel to Make It Lighter?

Here are the specific methods to adjust a heavy steering wheel to make it lighter: 1. Check the tire condition: Verify whether the tire pressure is sufficient. Inspect the tires for uneven wear to determine if the wheel alignment is abnormal. Adjust the alignment or inspect the suspension accordingly. 2. Start the engine: Start the car, engage the gear, and wait for 3 seconds. 3. Turn the steering wheel: Turn the steering wheel to its full lock, hold for 3 seconds, then return it to the center and turn off the engine. The steering wheel will feel lighter when driving again. Below is additional information on the causes of a heavy steering wheel: 1. Insufficient power steering fluid: Power steering fluid is a medium used in the car's power steering pump to transmit steering force and provide cushioning. The fluid needs to be replaced regularly, and any leaks should be checked. When the power steering fluid is low, the steering will feel heavy and stiff. 2. Low tire pressure: Low tire pressure increases the contact area between the tires and the road, leading to higher friction and making steering more difficult, resulting in a heavy steering wheel, which is unsafe for driving. 3. Toe-in: Toe-in can also affect the car's steering. Toe-in helps the steering wheels return to the center automatically, ensuring stable straight-line driving. Issues in this area can cause heavy steering. 4. Steering gear or power steering pump failure: The steering gear and power steering pump also influence the car's steering. Any malfunction in these critical components can make steering difficult. Problems such as universal joints, chassis suspension stabilizer bars, or plain bearings should not be overlooked.
17
3
Share

Why is the car air conditioning not cooling effectively?

Here are the specific reasons and solutions for poor cooling performance of car air conditioning: 1. Insufficient or low refrigerant: This may be caused by minor refrigerant leakage. You can observe through the sight glass on the dryer tank. During normal operation of the air conditioning, if there are continuous slow bubbles in the sight glass, it indicates insufficient refrigerant. If obvious bubble flipping occurs, it indicates severe refrigerant shortage. In this case, simply adding refrigerant will solve the problem. 2. Loose drive belt of the car air conditioning compressor: If the drive belt is loose, the compressor will slip during operation, causing reduced transmission efficiency and decreased compressor speed. This results in reduced delivery of compressed refrigerant, leading to ineffective cooling. If the compressor drive belt is too loose, it should be tightened. If it cannot be turned by hand, the belt is too tight and should be loosened slightly. If tightening is ineffective, or if the belt shows cracks, aging, or other damage, a new drive belt should be replaced.
5
2
Share

Is the driving method the same for dual-clutch and automatic transmissions?

Dual-clutch and automatic transmission vehicles share the same driving method. Here are some precautions for driving dual-clutch cars: 1. Normal roads: There are no specific requirements for gear selection; simply keep it in D gear for regular driving. 2. Parking: When the engine stops, shift to P gear to indicate the vehicle is out of service. Some cars require shifting to P gear to remove the key. 3. Reversing: After firmly pressing the brake and ensuring the car stops moving forward, shift to R gear. Gently release the brake to initiate reverse motion. 4. Waiting at stops: When stationary or driving in congested traffic, shift to N gear. 5. Highways: For rapid overtaking, use S gear. S gear represents the car's sport mode, allowing free gear changes like D gear. It's also suitable for uphill climbs as this gear provides maximum torque output and acceleration.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.