How to Achieve the Surface Finish of the Guide Sleeve Inner Groove?

1 Answers
MacMiles
07/28/25 10:44pm
CNC lathe processes stainless steel to the required precision, including dimensional tolerance and geometric tolerance, while ensuring a machining allowance of 1-2 microns is left. The equipment is installed on the lathe tool holder to perform mirror finishing on the stainless steel. Turn on the control cabinet switch, perform tool setting, feed, and retract the tool to complete the stainless steel mirror finish.
Was this review help?
13
5
Share
More Forum Discussions

What Impact Does a Faulty Oil Cooler Have on the Engine?

The impact of a damaged oil cooler on the engine is as follows: 1. Engine oil mixing with water: The internal engine oil pipeline of the cooler is connected to the coolant pipeline, leading to water entering the engine oil, causing emulsification of the engine oil, and subsequently damaging the engine. 2. Oil leakage issues: Other common faults include blockage of the engine oil passage, leakage at the engine oil passage interface, blockage of the coolant pipeline, and leakage at the coolant pipeline interface. The functions of the engine oil cooler are as follows: 1. Cooling effect: If the engine oil temperature exceeds the normal value, it will cause the engine oil to become too thin, reducing the lubrication effect. Therefore, when the engine is hot, the coolant flowing through the engine oil heat exchanger is responsible for absorbing the heat from the engine oil, maintaining the average temperature of the engine oil in the lubrication system not exceeding the upper limit (generally 90°C). 2. Heating effect: During cold starts, the engine oil temperature is low and its fluidity is poor, which increases the rotational resistance of various engine components. Therefore, it is necessary to raise the engine oil temperature as quickly as possible. As the engine runs, the temperature gradually increases, and the coolant also heats up accordingly. At this time, the coolant, which is at a higher temperature than the engine oil, will heat the engine oil at the engine oil heat exchanger.
17
0
Share

How often should Castrol EDGE oil be changed?

Under normal circumstances, Castrol EDGE should be changed once a year or every 10,000 kilometers, as it is a fully synthetic engine oil. For more details, please see below: 1. Oil change frequency: Normally, fully synthetic oil should be changed every 10,000 kilometers or about one year, semi-synthetic oil every 7,500 kilometers or about nine months, and mineral oil every 5,000 kilometers or about six months. Time or mileage, whichever comes first. 2. Introduction to Castrol EDGE: The Castrol EDGE series is the top-tier fully synthetic engine oil from Castrol, all of which are SN-grade, on par with Mobil 1 and Shell Helix Ultra. Castrol EDGE comes in four viscosities to meet different driving condition requirements. The four viscosities are: 0W-40, 5W-40, 5W-30, and 10W-60.
17
0
Share

What are the side effects of installing a power window kit?

The side effects of installing a power window kit include water leakage or damage to the battery. Below are specific details about the side effects of installing a power window kit: 1. Poor sealing: Installing a power window kit may lead to water leakage. Since the power window kit is an aftermarket addition, installation requires disassembly. Poor installation or issues with the kit itself can result in inadequate sealing, potentially causing water leakage. 2. Anti-pinch function: Prevents accidental injury to passengers during the automatic window closing process. 3. Battery damage: Aftermarket power window kits may not match the car's electrical current, which could lead to battery damage during use. It is recommended that owners install the kit properly and choose a reliable, high-quality power window kit.
8
1
Share

What is the top speed of the Gold Wing 1800?

Honda Gold Wing 1800 can reach a speed of 180 km/h. The Honda Gold Wing 1800 is a sports touring motorcycle that emphasizes comfort and stability. Some people refer to this motorcycle as the Rolls-Royce of motorcycles, acknowledging its prestigious status in the motorcycle world. Here are some additional details: 1. Engine: The Honda Gold Wing 1800 is equipped with a water-cooled four-stroke engine, with a maximum power output of 80 kW and a maximum torque of 161 Nm, and a displacement of 1832 ml. 2. Appearance: The Honda Gold Wing 1800 is a motorcycle under the Honda brand. Its dimensions are: length 2630 mm, width 945 mm, height 1525 mm, with a wheelbase of 1690 mm, ground clearance of 125 mm, and seat height of 740 mm.
17
0
Share

What to Do When a Car Gets Flooded?

After a car is flooded, it should be immediately taken to a repair shop for maintenance. Below are the reasons why a car may stall after being flooded: 1. The high-voltage distribution system gets damp or short-circuits due to water ingress, causing the engine to stall: This is a relatively common situation where the water appears shallow, the car can pass through, but it stalls, usually due to splashing water. 2. Water enters the exhaust pipe: The car's exhaust pipe is positioned relatively low, and generally, if the water level rises above the exhaust pipe, the engine will stall due to the inability to expel exhaust gases. 3. Water enters the air intake: This occurs when water reaches the air filter, leading to stalling. This situation is less common and usually only happens when the water level is quite high.
19
4
Share

Can the Engine Start-Stop Technology Be Turned Off?

Engine auto start-stop can be turned off. Here is some relevant information about auto start-stop: 1. Introduction: The auto start-stop function, also known as the engine auto start-stop system. Simply put, it automatically shuts off the engine when the vehicle comes to a temporary stop (such as waiting at a traffic light). When it's time to move forward again, the system automatically restarts the engine. The auto start-stop feature helps reduce emissions and lower fuel consumption during traffic light stops or short pauses. 2. Working Principle: By integrating an enhanced motor with idle start-stop capability into a traditional engine, the system completely shuts off the engine when idle stop conditions are met. When the vehicle needs to move again, the idle start-stop motor system quickly responds to the driver's command, restarting the engine instantly to ensure seamless operation, thereby significantly reducing fuel consumption and exhaust emissions.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.