···
Log in / Register

How to accurately judge the reference point for pulling over?

1 Answers
Caroline
07/25/25 1:36am
First, locate the joint of the car's wiper (usually at the middle of the wiper), then align this joint with the curb when pulling over. The center of the steering wheel should be aligned with the middle of the road, at which point the vehicle is already quite close to the curb. You can use the right rearview mirror to assess the distance between the vehicle and the curb, with an ideal gap of around 30 centimeters.
Was this review help?
19
4
Share
More Forum Discussions

How to Set the BMW X1 Rearview Mirror Tilt-Down Function When Reversing

To set the BMW X1 rearview mirror tilt-down function when reversing, follow these steps: 1. Start the engine and ensure the mirror adjustment switch is on the left side. You must have the correct seat memory settings (including mirror angles). 2. Adjust the seat memory to set the mirror to the memorized position. 3. Move the mirror adjustment button to the right. 4. Shift the gear lever to the "R" position. 5. Use the mirror adjustment button to tilt the mirror to the desired downward position. 6. After adjustment, shift the gear lever back to "N" or "P". 7. Shift into "R" again to test; the right mirror should tilt down to the previously adjusted position. 8. Shift back to other gears, and the right mirror should correctly return to the memorized position. 9. Once completed, you can turn off the engine.
2
0
Share

Where is the fog light on the Buick Excelle?

The fog light button of the Buick Excelle is located at the lower left side of the steering wheel and has a round knob. The Excelle does not have front fog lights, only rear fog lights. The front fog lights of a car are installed below the headlights, one on the top and one on the bottom. The rear fog light of the car is located in the taillight and is symmetrically placed with the car's reverse light. The rear fog light is a single reverse light. More details are as follows: 1. The function of the fog light is: when visibility is greatly affected by fog or rain, other vehicles can also see the vehicle. Therefore, the light source of the fog light needs to have strong penetration. 2. Ordinary vehicles use halogen fog lights, while xenon fog lights are more advanced than halogen fog lights. Because the fog light switch generally includes 3 gears, the 0 position is off, the first gear adjusts the front fog light, and the second gear adjusts the rear fog light. When the first gear is turned on, the front fog light works, and when the second gear is turned on, the front fog light and rear fog light work together. 3. Therefore, when turning on the fog light, it is recommended to know which gear the switch is in, so as to facilitate your own use without affecting others and ensure driving safety.
6
0
Share

How to Turn Off the Start-Stop Switch on Haval H6?

Method to disable the start-stop function on Haval H6: The automatic start-stop system of Haval H6 is enabled by default when the ignition is turned on. To turn it off, simply press the button once. Note that the light being on indicates the system is deactivated. The automatic start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light) and restarts the engine when it's time to move forward again. More details about Haval H6 are as follows: 1. Haval H6 is a model under the Haval brand. In terms of body dimensions, the Haval H6 measures 4640mm in length, 1825mm in width, and 1690mm in height, with a wheelbase of 2680mm. 2. In terms of exterior design, the Haval H6 features dynamic micro-curves to outline its side profile, creating a poised and aggressive stance. The LED intelligent headlights adopt a wrap-around wheel arch design.
14
5
Share

How to Charge an Auto Start-Stop Battery?

Charging a start-stop battery follows the same method as charging a regular battery. Connect the charger's negative terminal to the battery's negative terminal and the charger's positive terminal to the battery's positive terminal, then press the charge button to begin charging. Note: Do not turn on the ignition switch while the battery is charging. For a start-stop battery in a depleted state, the charging time typically ranges from 8 to 16 hours. More details are as follows: 1. After the engine starts, it drives the alternator via the belt, and the generated electricity is rectified and voltage-stabilized before directly charging the car battery. 2. Start-stop batteries, also known as maintenance-free batteries, are commonly available in two types: AGM and EFB. European or German cars generally use AGM, while Japanese cars typically use EFB. Due to their structural advantages, maintenance-free batteries consume very little electrolyte and rarely require distilled water replenishment during their lifespan. They also feature resistance to vibration, high temperature tolerance, compact size, and low self-discharge. The lifespan of a maintenance-free battery is generally about twice that of a conventional battery. 3. The auto start-stop system automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light or in traffic) and restarts it when it's time to move again. This system reduces fuel consumption and exhaust emissions by minimizing engine idle time.
13
0
Share

What is the fuel consumption of the Mercedes-Benz S-Class?

The combined fuel consumption of the Mercedes-Benz S-Class is 7.8-8.5L/100km. There are currently 5 models of the Mercedes-Benz S-Class available for sale: the S400L Luxury, S400L Business, and S450L, with a combined fuel consumption of 7.8-8.5L/100km. The S450L-4MATIC has a combined fuel consumption of 8.2L/100km, while the S500L-4MATIC has a combined fuel consumption of 8.5L/100km. The above figures are NEDC combined fuel consumption, which is the data measured under the NEDC test procedure for comprehensive driving conditions. The actual fuel consumption is higher than this value, ranging from 9.6-9.8L/100km. Here are 5 tips to help reduce fuel consumption while driving: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly pressing the accelerator hard, as this can significantly increase fuel consumption. Light acceleration, light braking, and early braking: While driving, press the accelerator lightly to avoid sudden increases in engine RPM and prevent the car from shaking during operation, thereby making the car more fuel-efficient. By anticipating road conditions and applying slow and even acceleration or braking, fuel economy can be improved by up to 20%. Maintain proper tire pressure: Keep tire pressure at the level recommended by the manufacturer. For every 2 PSI below the recommended value (approximately 0.2 in metric units relative to the standard pressure of 2.4), fuel consumption increases by 1%. Regular maintenance or vehicle checks: Timely oil changes can reduce carbon buildup (carbon deposits can cause ignition issues, sluggish acceleration, increased fuel consumption, and in severe cases, even cylinder misfires). Regularly check and replace the air filter if dirty, and clean or replace the fuel injectors, spark plugs, and throttle body as per the recommended mileage. Close the windows while driving. Driving with windows open increases wind resistance, which in turn increases the resistance the car faces, requiring more power and thus increasing fuel consumption.
13
2
Share

How long does it take for a traffic violation record to be cleared after paying the fine?

After paying the relevant fines, the traffic violation record is usually cleared within 3-5 days. Generally, if drivers fail to comply with traffic rules, they are likely to commit traffic violations, which result in penalty points and fines. Below are the relevant provisions of traffic regulations: 1. Article 52: If a party fails to fulfill the administrative penalty decision within the specified period, the traffic management department of the public security organ that made the penalty decision may take the following measures: (1) For overdue fines, an additional 3% of the fine amount shall be imposed daily, with the total additional fine not exceeding the original fine amount; (2) Apply to the People's Court for compulsory enforcement. 2. Article 53: If the traffic management department of the public security organ imposes penalties such as temporary suspension or revocation of a motor vehicle driver's license on a driver from another jurisdiction, it shall transfer the driver's license to the issuing traffic management department within 15 days from the date of the penalty decision. 3. If the violator applies not to transfer the temporarily suspended driver's license to the issuing traffic management department, the request shall be granted and noted in the administrative penalty decision. 4. Article 54: If a violator is subject to administrative detention and a fine, the traffic management department of the public security organ shall inform the violator that they may authorize another person to pay the fine on their behalf.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.