How soon can I schedule Subject 4 after passing Subject 2?

1 Answers
VonJuliette
07/24/25 12:16pm
If you take Subject 3 first and then Subject 2, you can schedule Subject 4 the day after passing Subject 2. Here are the relevant details: Subject 2: The Subject 2 test is conducted in order. The test items include slalom, curves, hill start and stop, single-plank bridge (twice), and right-angle turns. For the slalom, you need to navigate back and forth once each, paying attention to speed and reference points. Hill start is also a key point, where the coordination of clutch and throttle is crucial. During the test, it's important to stay relaxed. Subject 3: Subject 3 includes starting, shifting gears within 20000mm, and stopping, with a passing score of 90. You also have two attempts. Pay attention to signaling, and when making a U-turn, ensure the wheels stay slightly outward to avoid crossing the line. Starting, changing lanes, making U-turns, and stopping all require signaling and avoiding crossing the line to pass.
Was this review help?
18
4
Share
More Forum Discussions

What is an EOBD fault?

It refers to the On-Board Diagnostics system. Below are relevant introductions about the On-Board Diagnostics system: 1. Introduction: OBD is the abbreviation for On-Board Diagnostics in English, translated as "On-Board Diagnostics System" in Chinese. This system continuously monitors whether a vehicle's emissions exceed standards based on the engine's operating conditions. If emissions exceed standards, it will immediately issue a warning. When a system fault occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate, and the Powertrain Control Module (PCM) will store the fault information in memory. The fault code can be read from the PCM through a specific procedure. Based on the fault code's prompt, maintenance personnel can quickly and accurately determine the nature and location of the fault. 2. Working Principle: The OBD device monitors multiple systems and components, including the engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR, etc.
1
4
Share

How long after passing C1 Subject 2 can you schedule Subject 3?

C1 Subject 3 test can be scheduled at least 10 days after passing the Subject 2 test. The C1 examination consists of four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving knowledge. C1 driver's license examination passing standards: Traffic regulations and related knowledge (Subject 1) - written test, full score of 100, 90 or above is passing. Field driving (Subject 2) - on-site, actual vehicle. Minimum requirement is 80 points, below 80 is failing. Road driving (Subject 3) - highway or simulated site, actual vehicle. Full score of 100, must achieve 90 or above to pass. Safe and civilized driving knowledge - written test, questions mainly in the form of cases, pictures, animations, etc., question types include true/false, single-choice, and multiple-choice, totaling 50 questions, full score of 100, 90 is passing. C1 application age: The minimum age limit for a C1 driver's license is 18 years old, with no upper age limit. However, applicants over 70 years old must pass tests on memory, judgment ability, reaction ability, etc.
1
1
Share

What are the consequences of engine overheating?

Engine overheating can cause problems with the car's cooling system, such as damage to the cylinder head gasket and thinning of the engine oil. After the engine cools down, open the radiator cap to check the coolant level in the radiator and reservoir, and see if the radiator is dirty or has deposits. If the coolant is insufficient, replenish the radiator and reservoir with coolant. If coolant is not available, add water as an emergency measure. Problems with the cooling system: After the engine cooling system overheats, the cooling system pipes may burst, or the heater core may rupture, causing water damage to electrical components in the cabin. Cylinder head gasket damage: This can damage the engine's cylinder head gasket. Once the gasket is damaged, coolant may enter the combustion chamber and participate in combustion, which may bend the connecting rod in some cases. Thinning of engine oil: When the engine temperature is too high, the engine oil may become too thin and fail to effectively lubricate the internal components of the engine. This can lead to increased wear of the engine bearings, crankshaft scoring, and sticking of the cylinder walls and pistons. How to handle engine overheating: Safely drive the vehicle off the road and park it in a safe place. Set the transmission to "P" and apply the parking brake. Turn on the hazard warning lights and turn off the air conditioning if it is in use. If steam is coming from under the hood, open the hood while keeping the engine running. Check if the radiator fan is working properly. After the temperature gauge needle drops, turn off the engine.
8
4
Share

What car is 96144?

96144 is an unlicensed taxi. Below is relevant information about automobiles: 1. Definition of automobile: According to China's latest national standard "Terms and Definitions of Motor Vehicles and Trailers" (GB/T3730.1-2001), an automobile is defined as: a non-track vehicle with 4 or more wheels powered by an engine, mainly used for transporting people and/or goods; towing vehicles carrying people and/or goods; or for special purposes. 2. Introduction to domestic automobile brands: Domestic automobile brands include Hongqi, Changan, Great Wall, Chery, Geely, Roewe, BYD, etc.
15
3
Share

What is the maximum wading depth of the Envision?

Approximately fifty centimeters of water on the road surface. The following is a related introduction to the Envision Plus: 1. Design: Although the Envision Plus continues the Buick family-style design, from the details, whether it's the more refined front face or the more imposing and elongated body side lines, it exudes a sense of 'nobility' compared to the Envision. The addition of two Avenir models, featuring the exclusive Merlot Red color, chainmail grille, and 'Avenir' badges on both the interior and exterior, further enhances the premium feel of the Envision Plus. 2. Powertrain: The Envision Plus comes standard with a 48V mild hybrid system across the lineup. According to the official statement, this powertrain offers smoother starts, lower fuel consumption, and stronger performance. The most notable highlight is that with the 48V mild hybrid system, the auto start-stop function is no longer considered a drawback.
12
1
Share

How many types of C-class licenses are there?

The C-series driver's licenses for small vehicles are specifically divided into four types: C1, C2, C3, and C4. Below are the specific categories of C-class licenses: 1. C1: The C1 license is for manual transmission small vehicles, allowing the driver to operate vehicles with no more than 9 seats and a body length not exceeding 6 meters. Other vehicle types permitted under the C1 license include C2 (small automatic transmission vehicles), C3 (low-speed trucks), and C4 (three-wheeled vehicles). 2. C2: The C2 license is for automatic transmission small vehicles, allowing the driver to operate automatic transmission vehicles with no more than 9 seats and a body length not exceeding 6 meters. C2 license holders cannot drive manual transmission vehicles. 3. C3 and C4: The C3 and C4 licenses are for small trucks, three-wheeled motorcycles, four-wheeled agricultural transport vehicles, three-wheeled agricultural transport vehicles, and other permitted vehicle types.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.