How should the rearview mirrors be adjusted?

1 Answers
DelIsla
07/24/25 3:03am
Left rearview mirror: The optimal adjustment angle is to have the road environment occupy most of the mirror surface, with only 1/4 of the car body visible. Right rearview mirror: Similarly, the road environment should occupy most of the mirror surface. Since the right rearview mirror is farther from the driver's line of sight, position the vanishing point of the road at the top of the mirror, with the car body also showing 1/4. Interior rearview mirror: Simply adjust it manually so that the distant horizon is centered in the mirror.
Was this review help?
20
3
Share
More Forum Discussions

How to Reset the Maintenance Reminder on Tiggo 3?

The steps to reset the maintenance reminder on Tiggo 3 are: 1. Turn off the ignition switch, ensuring the instrument panel is powered off; 2. Turn the ignition switch to the ACC position; 3. Press and hold the button on the instrument panel without releasing, then turn the ignition switch to the ON position; 4. Wait for a few seconds, and the maintenance light will be reset. Taking the 2020 Tiggo 3 as an example, its body structure is a 5-door, 5-seat SUV with dimensions of length 4420mm, width 1760mm, height 1670mm, a wheelbase of 2510mm, a fuel tank capacity of 55L, and a curb weight of 1358kg.
1
2
Share

How to Replace the Battery in a Vezel Car Key?

To replace the battery in a Vezel car key, follow these steps: 1. Locate the small switch on the car key and flip it; 2. Pull out the metal mechanical key; 3. Use the removed mechanical key to pry open the car key cover to separate it; 4. After opening the car key cover, the key splits into two halves, with the battery located in one of them; 5. Remove the old battery and insert the new one; 6. Close the key cover. The Vezel's body dimensions are: length 4294mm, width 1772mm, height 1605mm, wheelbase 2610mm, fuel tank capacity 50 liters, and trunk capacity 437 liters.
8
2
Share

How to Reset the Maintenance Indicator?

The method to reset the maintenance indicator is: 1. Close the car door, insert the key and turn on the ignition without pressing the brake; 2. Press the reset button on the dashboard until the maintenance information is displayed, then release; 3. Select "reset," release the button, and press it again for a few seconds until the reset is successful. Maintenance items include: 1. Replace engine oil and oil filter; 2. Replace oil filter element, air filter element, fuel filter element, cabin air filter element, and transmission oil filter element; 3. Refill windshield washer fluid, coolant, and air conditioning refrigerant; 4. Check the drive belt for wear; 5. Clean throttle body and carbon deposits in the cylinders; 6. Inspect the chassis for damage; 7. Check the body and tires.
11
2
Share

How to Quickly Remove 3M Adhesive from a Car?

Methods to quickly remove 3M adhesive from a car include: 1. Soak a towel in hot water, then use the hot towel to warm the 3M adhesive area on the car for a while to reduce its stickiness before wiping it off; 2. Use a hairdryer set to hot air, blowing it on the 3M adhesive area for a few minutes to weaken the adhesive, then scrape it off or wipe with a towel; 3. Dip a towel in a small amount of alcohol or essential balm and wipe the 3M adhesive area to clean it off; 4. For larger adhesive areas on the car, use a specialized 3M adhesive remover to eliminate it.
18
5
Share

What does the exclamation mark on the Focus dashboard indicate?

Focus dashboard displaying an exclamation mark varies depending on the situation: 1. A yellow gear with an exclamation mark inside is the transmission system warning light, indicating an abnormality in the transmission; 2. A red icon with brackets on the outside, a circle in the middle, and an exclamation mark inside the circle is the brake system warning light; 3. A yellow triangle with an exclamation mark inside is the general fault indicator light. Taking the 2021 Focus as an example, it belongs to the compact car category, with body dimensions of length 4647mm, width 1810mm, height 1468mm, a wheelbase of 2705mm, a fuel tank capacity of 53 liters, and a trunk capacity of 511 liters.
18
0
Share

What does the BMW M package mean?

BMW M package refers to the modification and upgrade of the car. The BMW M package includes: sport wheels, wide tires, high-brightness tailpipes, sporty body kits, enhanced shock absorbers, reinforced brake pads and discs, and external M-series sport logos. Taking the 2020 BMW X5 as an example, it belongs to the mid-to-large SUV category, with body dimensions of: length 4930mm, width 2004mm, height 1776mm, wheelbase 2975mm, and fuel tank capacity of 83L. The 2020 BMW X5 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 265PS, maximum power of 195kW, maximum torque of 400Nm, and is paired with an 8-speed automatic transmission.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.