How Should Cheating in Driving Tests Be Handled?

1 Answers
DeNolan
07/29/25 11:01pm
Cheating in driving license tests will result in a 3-year ban from applying for a driving permit. If an applicant is found to have engaged in bribery or cheating during the examination process, their qualification for the test will be revoked, and any other subjects they have already passed will be invalidated. The applicant will also be prohibited from applying for a motor vehicle driver's license again within one year. If an applicant obtains a motor vehicle driver's license through fraudulent means such as deception or bribery, the traffic management department of the public security authority will confiscate the driver's license and revoke the driving permit. The applicant will be barred from applying for a motor vehicle driver's license again within three years. Driving training institutions and their instructors found to have reduced training hours, cut training programs, bribed examiners, solicited money or valuables from students under the pretext of guaranteeing test success, or participated in illegal processing of driver's licenses or cheating in exams should be reported to the training supervision department and publicly disclosed. Cheating in driving tests is suspected of constituting the crime of organizing cheating, as "driving tests" fall under the category of "national examinations" as defined in Article 241-1 of the Criminal Law. In national examinations prescribed by law, those who organize cheating shall be sentenced to fixed-term imprisonment of not more than three years or criminal detention, and/or be fined; if the circumstances are serious, they shall be sentenced to fixed-term imprisonment of not less than three years but not more than seven years and also be fined.
Was this review help?
11
5
Share
More Forum Discussions

What are the symptoms of a faulty Audi fuel injector?

Audi fuel injector failure manifests as follows: 1. Engine vibration: When the fuel injector is damaged and fuel injection becomes irregular, the engine will exhibit operational vibrations during operation. 2. Reduced power and increased fuel consumption: As the injector deteriorates, fuel injection volume and pressure cannot be maintained, leading to decreased vehicle power and higher fuel consumption. 3. Increased exhaust emissions: Faulty fuel injectors inevitably affect the mixing and combustion of the air-fuel mixture, resulting in elevated pollutant levels in vehicle emissions. 4. Starting difficulties: In cases of severe injector damage, the vehicle may experience starting problems and even sudden stalling while driving.
11
0
Share

Is the Audi Pike's Peak the same as the Audi Q7?

Audi Pike's Peak and Audi Q7 are not the same. The detailed differences between Audi Pike's Peak and Audi Q7 are as follows: 1. Different engines: Audi Pike's Peak is equipped with a V8 engine. Audi Q7 is equipped with a V6 gasoline engine. 2. Different transmissions: Audi Pike's Peak is matched with a 6-speed Tiptronic transmission. Audi Q7 is matched with a 6-speed automatic transmission. 3. Different top speeds: Audi Pike's Peak has a top speed of 249 km/h. Audi Q7 has a top speed of 225 km/h.
2
1
Share

What is ROEWE?

ROEWE is a car brand under SAIC Motor Corporation Limited, launched in October 2006. The name ROEWE signifies "Innovative Glory and Prestige Worldwide." Currently, ROEWE offers 7 sedan models and 6 SUV models in its lineup. Below is an introduction to the ROEWE RX5: 1. Exterior: The Zhilianwang Titanium Edition features minor adjustments in details such as the headlight assembly and wheel design compared to the standard model, while maintaining the overall elegant and sophisticated design. 2. Interior: The new model retains the same style as the current version and is equipped with the Internet Car Intelligent System 2.0—the AliOS-based Banma Zhixing solution, enabling dual-zone intelligent voice control for both driver and front passenger, as well as IoT-based remote vehicle control via smartphone. The Titanium Edition emphasizes safety and internet connectivity, featuring the ADAS intelligent active safety assistance system, which includes LDW (Lane Departure Warning), FCW (Forward Collision Warning), and AEB (Automatic Emergency Braking) for active braking assistance. Additionally, the vehicle comes with a 360-degree panoramic camera, side airbags, front parking sensors, and an electric tailgate. The central control screen supports voice wake-up, AI voice control, dual-zone voice commands, lane-level navigation, high-speed Wi-Fi connectivity, and lifetime OTA free upgrades. 3. Powertrain: The new model is powered by a 1.5T engine with a maximum output of 124 kW (169 PS) and peak torque of 250 N·m, achieving a 0-100 km/h acceleration time of 9.12 seconds. It is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission, with a combined fuel consumption as low as 6.8 L/100 km.
10
5
Share

Is It Dangerous If Something Falls Into the Handbrake Gap?

Generally, it is not very dangerous if something falls into the handbrake gap, as the car is also equipped with a foot brake in addition to the handbrake, preventing brake failure. Below are the potential impacts of foreign objects falling into the handbrake gap: 1. Causing abnormal noise: The most common effect of foreign objects falling into the handbrake gap is that they may cause abnormal noise. To avoid affecting the use of the handbrake, it is recommended to have it repaired and the foreign object removed. 2. Leading to handbrake failure: The handbrake operates on the principle of leverage, using a steel cable to activate the rear wheel brake mechanism. The key components are the locking tooth and gear, which automatically engage with each other. If the foreign object falls into a position that interferes with the engagement of these internal components, it could severely lead to handbrake failure. Therefore, it is necessary to remove the foreign object as soon as possible.
17
4
Share

What does a severe powertrain malfunction mean?

Severe powertrain malfunction refers to serious failures occurring in the entire mechanical arrangement process where the power generated by the engine is transmitted through a series of power transfers and finally to the wheels. The following are the reasons for severe powertrain malfunctions: 1. Incorrect ignition timing or premature ignition: Causes premature combustion and detonation of the combustible mixture; due to ignition system failures, resulting in spark plug misfires or weak sparks. 2. Cylinder compression pressure: Severe wear of pistons, piston rings, and cylinders increases the clearance between them, reducing sealing performance, leading to cylinder head leakage and decreased cylinder compression pressure; poor sealing of the crankcase reduces suction due to air leakage. 3. Clogged filter: Check if the air filter is clogged and clean it if necessary. 4. Throttle opening issue: Check the throttle opening—when the accelerator pedal is fully depressed, the throttle should be fully open; otherwise, relevant inspections and repairs should be performed.
13
0
Share

Does Thinner Damage Car Paint?

Here are the specific impacts of using thinner to clean a car on the paint: 1. Paint Dissolution: Using thinner to remove asphalt will also dissolve the car paint. Even if you rinse it with water immediately, some of the original paint will still be dissolved. 2. Rust: Over time, the areas cleaned with thinner will show differences in paint compared to other parts, and rust may even appear. Below is additional information about thinner: 1. First characteristic of thinner: It is highly volatile and can evaporate quickly, with vapors spreading several meters or even tens of meters away in a short time. When these vapors encounter an open flame, they can ignite, and the flame can travel back along the airflow, causing intense combustion. When the concentration of thinner vapors in the air reaches a certain ratio, a strong explosion can occur, leading to significant economic losses and casualties. Therefore, it is essential to ensure good ventilation in the operating area and strictly prohibit the use of open flames. 2. Second characteristic of thinner: It has good insulation properties and easily generates static electricity. When a plastic container filled with thinner is shaken repeatedly, the static charge can reach tens of thousands of volts, which can easily cause a fire.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.