···
Log in / Register

How Should Beginners Steer the Wheel?

4 Answers
DeHarmony
08/26/25 3:58am

Methods for beginners to steer the wheel: Visualize the steering wheel as a clock face, with the left hand positioned between the 9 and 10 o'clock positions and the right hand between the 3 and 4 o'clock positions. This posture provides better body support in case of a collision. Techniques for turning: For gentle curves, steer early and slowly, and return early and slowly; for sharp turns, steer late and quickly, and return early and quickly; slow steering requires slow returning, and quick steering requires quick returning. Precautions for beginner drivers: 1. Avoid prolonged one-handed operation of the steering wheel unless necessary for driving operations, and do not rest hands on the gearshift or window frame for extended periods. 2. Do not apply excessive force when turning the steering wheel, and avoid turning it when the vehicle is stationary. 3. When driving on bumpy roads, hold the steering wheel firmly with both hands to prevent loss of control and potential accidents.

Was this review help?
14
4
Share
StellaLee
09/08/25 4:56am

When I first learned to steer, I was extremely nervous. The instructor always said I was too stiff. Remember to hold the steering wheel at the three and nine o'clock positions with both hands for better control. Steering isn't about jerking the wheel, but turning it smoothly while adjusting the angle based on speed. For slow turns, rotate gently without moving your hands too far; at higher speeds, make smaller adjustments to avoid body roll. Always check the rearview and side mirrors to ensure it's safe before turning. A common beginner mistake is fixating on the wheel and forgetting the road ahead—I practiced in open areas to overcome this. The key is anticipating your path and preparing early, avoiding last-minute panic. Stay confident and practice gradually; it'll become second nature.

Was this review help?
4
2
Share
Expand All
DiJohn
10/22/25 4:58am

I've been driving for almost ten years, and steering requires the utmost sense of proportion. Don't always think about showing off your skills—safety comes first. Before turning the wheel, always glance at your blind spot; with so many cars in the city, accidents can happen easily. When turning, sit upright, rotate the wheel naturally with both hands, and match your speed to the direction—that's key. Beginners tend to oversteer, leading to delayed correction; in reality, small, gradual adjustments are more stable. Pay attention to road conditions: avoid sharp turns in the rain to prevent skidding, and ease off the throttle while lightly braking before turning. I recommend beginners practice in various scenarios, such as 90-degree turns in parking lots or highway lane changes. Patience is the most important thing.

Was this review help?
15
2
Share
Expand All
VanBraxton
12/05/25 5:21am

When teaching beginners how to steer, I emphasize fundamental techniques. Keep both hands steady on the steering wheel, and look far ahead along the intended path when turning. During low-speed practice, take your time—practice turning one full circle and then returning it to build familiarity. Identify key reference points: begin turning before the intersection stop line, keeping the tires aligned for better control. Common beginner mistakes include over-rotating the wheel and struggling to correct it—make minor adjustments instead. Always watch for pedestrians when turning. Safety tip: check your surroundings after completing a turn before moving. With practice, it’ll become smoother.

Was this review help?
11
5
Share
Expand All
More Forum Discussions

Can I choose a license plate number again after timeout on 12123?

12123 allows re-selection after timeout during license plate number selection. 12123 license plate selection process: Log in to the online self-selection system for motor vehicle license plates: Enter the system, read the instructions, click "I have read and agree to the above agreement" to proceed to the next step. Enter vehicle and owner identification information: Input the vehicle identification number, owner identification number, and name of the selected vehicle. Enter the correct verification code as displayed on the screen. Selection notes: When all online selection attempts are exhausted on the 12123 app, you must wait until the number's validity period expires and then visit the DMV office window to reapply for the service, as online processing will no longer be available.
13
5
Share

What is the fuel consumption of the 2011 Nissan Sunny?

The average fuel consumption of the 2011 Nissan Sunny is 7.3 liters per 100 kilometers. The actual comprehensive fuel consumption is related to multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on the actual driving conditions. Methods to determine fuel consumption: You can determine the fuel consumption through the car's dashboard, where F=full; E=empty. When the fuel tank light turns red, record the mileage, then note how much fuel is added. When the fuel is next exhausted, record the mileage again. Subtract the initially recorded mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but a higher fuel consumption does not necessarily mean a larger displacement. In a relative sense, the size of a car's engine displacement does not directly correlate with fuel consumption. In addition to engine displacement, factors such as the car's shape, weight, and engine technology are also important factors affecting fuel consumption.
19
4
Share

What is the actual fuel consumption of the 2011 Kia K5?

The official fuel consumption (combined cycle) of the 2011 Kia K5 is 7.7L/100km. The actual comprehensive fuel consumption is related to multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on the actual driving conditions. Methods to determine fuel consumption: You can determine the fuel consumption through the car's dashboard, where F=full and E=empty. When the fuel tank light turns red, record the mileage, then note how much fuel is added. When the fuel is next depleted, record the mileage again. Subtract the initial mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but a higher fuel consumption does not necessarily mean a larger displacement. In relative terms, the size of a car's engine displacement does not directly correlate with fuel consumption in a proportional manner. Besides engine displacement, factors such as the car's shape, weight, and engine technology are also significant contributors to fuel consumption.
5
3
Share

What does brake fade mean?

Brake fade refers to the phenomenon where the braking force diminishes due to high temperatures generated by intense friction between the brake discs and brake pads. Under high-temperature conditions, the braking performance of the system is significantly reduced. When brake fade occurs, it is advisable to minimize sudden braking, use intermittent braking, and if the speed is not too high, find an opportunity to stop the vehicle and rest for half an hour to an hour to alleviate the fade. Below is additional information: 1. Precautions during brake fade: Brake fade occurs after continuous, high-intensity braking when components such as brake drums and discs exceed their optimal temperature range for effective braking, leading to reduced braking performance. If the temperature exceeds the limit, it can result in brake failure. When brake fade occurs, the inability to provide sufficient braking force can extend the stopping distance, compromising driving safety. In such cases, shifting to a lower gear to utilize engine braking is recommended. If the fade is severe, it is best to pull over immediately and allow the brake system to cool naturally before continuing to drive. 2. Solutions: The mainstream solution to brake fade involves adding grooves to the brake discs to aid heat dissipation and maintain some effectiveness at high temperatures. Another method is drilling holes in the brake discs. Both approaches primarily increase the heat dissipation capacity of the brake discs, delaying the onset of fade, a common practice for most family cars. For higher-performance models, special materials may be added to the brake discs, or larger-sized discs may be used, effectively postponing the occurrence of fade. Supercars often use ceramic materials with a high-density structure, infused with carbon to create carbon-ceramic brake discs, or employ special metals for disc manufacturing.
18
3
Share

Why Does the Accelerator Make Strange Noises When the Air Conditioner is On?

The detailed reasons for strange noises when stepping on the accelerator with the air conditioner on are as follows: 1. Due to compressor damage: The electromagnetic clutch of the air conditioner compressor slips, or the internal bearings of the compressor wear out due to long-term use. 2. Due to collisions during daily use of the vehicle: Or when replacing components such as the electric fan, radiator, or condenser, improper installation due to mismatched part sizes, differences in rubber sleeve sizes, or inadequate alignment of the radiator and condenser frame can cause body resonance when the electric fan operates with the air conditioner on, resulting in strange noises when accelerating. 3. Due to air conditioning system pressure issues: If the radiator or condenser surface is too dirty, leading to poor heat dissipation, the pressure in the pipes rises when the air conditioner is turned on, causing the electric fan to operate at high speed and produce strange noises. Alternatively, if the system is overcharged with refrigerant, stepping on the accelerator with the air conditioner on can increase system pressure, leading to high-speed operation of the electric fan and strange noises.
1
5
Share

How Many Kilometers Can a 125cc Motorcycle Run?

A 125cc motorcycle can run approximately 500 kilometers. The actual comprehensive fuel consumption is influenced by multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on real driving conditions. Methods to Determine Fuel Consumption: You can determine the fuel consumption through the vehicle's dashboard, where F=full and E=empty. When the fuel tank's red light comes on, record the mileage, then note how much fuel is added. When the fuel is next depleted, record the mileage again. Subtract the initial mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors Affecting Fuel Consumption: There is a certain relationship between engine displacement and fuel consumption, but higher fuel consumption does not necessarily mean larger displacement. Relatively speaking, the size of a car's engine displacement does not directly correlate with fuel consumption in a proportional manner. Besides engine displacement, factors such as the car's shape, weight, and engine technology are also significant influences on fuel consumption.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.