···
Log in / Register

How Should Beginners Press the Accelerator Pedal When Driving?

4 Answers
Gwen
07/29/25 10:20am
Methods for beginners to press the accelerator pedal when driving: 1. Apply force gently when pressing and releasing the accelerator pedal, ensuring a light and gradual motion; 2. Do not press the accelerator pedal all the way down when starting the engine—it can be slightly higher than the idle speed; 3. When operating the accelerator pedal, use the right heel placed on the floor of the driver's compartment as a pivot point, gently press the accelerator with the ball of the foot, and use the ankle joint's extension and flexion to press down or release. It is recommended that drivers increase or decrease the accelerator based on road conditions and actual needs. Choose an appropriate gear to ensure the engine operates mostly at medium speed and with a larger throttle opening to save fuel.
Was this review help?
11
4
Share
LaylaLynn
08/13/25 2:03pm
When I first started driving, I always had trouble pressing the gas pedal smoothly—the car would either not move or suddenly lurch forward, which really scared me. Later, I learned the right technique: keep the front part of your heel firmly on the floor of the car and only use the ball of your foot to gently press the accelerator. When starting, don’t rush—after a red light, lightly tap the gas to let the car ease into motion, and never stomp on it all at once. With a manual transmission, you need to be even more careful—first slowly release the clutch while giving a little gas. I recommend beginners practice starting and low-speed acceleration in an empty parking lot for about 10-15 minutes to get a feel for the pedal’s sensitivity. Once you’re comfortable, driving in the city becomes much smoother. Safety first—once you master throttle control, you won’t have to worry about sudden acceleration. Remember, patience is key, and everyone can learn to do it well.
Was this review help?
18
5
Share
Expand All
CarmenFitz
10/07/25 4:29am
When teaching beginners to drive, I always emphasize the importance of smoothly pressing the accelerator. The key foot position is to keep the heel fixed on the floor mat and only move the forefoot to control the accelerator. Start by gently tapping the pedal to feel the engine's response, then gradually increase the pressure. For manual transmissions, it's essential to coordinate the clutch and accelerator to avoid stalling from abruptly releasing the clutch; automatic transmissions are easier, but avoid accelerating too quickly. Practice on quiet roads, starting with slow acceleration from 0 to 20 km/h, paying attention to speed changes. The depth of the accelerator affects safety—sudden acceleration on slippery roads can cause skidding, so develop the habit of pressing lightly. Take beginners through different scenarios multiple times, such as hill starts, where more accelerator pressure is needed, but don't overdo it.
Was this review help?
6
4
Share
Expand All
DiSawyer
11/20/25 5:53am
For beginners, pressing the accelerator is actually quite simple: gently press to start, then gradually increase pressure. Keep your heel firmly on the floor and use the ball of your foot to operate the pedal. Don't rush when starting; after a red light or stopping, lightly tap the accelerator a little to get the car moving. It's simpler with an automatic transmission, but with a manual transmission, be careful to coordinate with the clutch. Drive a few more times to get familiar, don't be nervous, mistakes are normal. Control the accelerator well, don't accelerate too quickly, and stay safer. Daily driving involves frequent starts and stops; mastering this makes for a smoother and more worry-free ride.
Was this review help?
14
2
Share
Expand All
More Forum Discussions

How to Lift a 6-Month Driver's License Suspension?

To lift a 6-month driver's license suspension, follow these steps: 1. Settle all traffic violations and pay the fines within the specified period; 2. Register at the vehicle management office within the designated time frame, complete the road traffic safety regulations and civilized driving course, and pass the exam to receive a full-score education notice; 3. Attend the full-score education study with the notice and obtain the subject one exam certificate; 4. Take the subject one exam, and upon passing, use the passing notice to retrieve your driver's license. A driver's license is a document issued by the government traffic department to individuals qualified to drive, typically in the form of a card. To obtain a driver's license, one must meet the minimum age requirement and pass the driving test.
14
1
Share

What is the normal range for the car dashboard temperature gauge?

2 to 4 bars indicate normal operating conditions. Below are specific details about car engine coolant temperature: 1. The normal operating temperature range for a car engine is approximately 90°C to 105°C, which corresponds to the middle position on simplified gauges. 2. Overheating can lead to insufficient engine cooling, causing thermal expansion of components that reduces clearance between moving parts. 3. Elevated temperatures reduce oil viscosity and accelerate component wear. Immediate corrective action is required to prevent potential engine seizure or severe mechanical damage. 4. Vehicles require monitoring systems like onboard diagnostics to track temperature, with thermostats and cooling fans maintaining stable coolant levels.
14
2
Share

Where is the car air conditioner drainage located?

Car air conditioner drainage outlets are all designed at the lowest point below the condenser in the cabin. The specific location varies by vehicle model, but you can find the drainage outlet by locating the condenser in the cabin. More information about car air conditioner drainage outlets is as follows: 1. The function of the air conditioner drainage outlet is to discharge water condensed during the heat exchange process when the evaporator absorbs moisture from the surrounding air while the air conditioner is in use. 2. After the air conditioner has been running for a while, a puddle of water may appear under the car, which is water discharged from the car air conditioner drainage outlet.
13
4
Share

How to Start the Baojun 510 Vehicle When the Remote Key Battery is Dead?

If the remote key of the Baojun 510 runs out of battery, you can use the mechanical door lock to open the door. The main driver's door of the car is equipped with a mechanical keyhole. The mechanical door lock of the Baojun 510 is hidden under the decorative cover of the left front door handle. Insert the key into the hole under the decorative cover, press the key into the hole while pushing the decorative cover backward to separate it, then insert the mechanical key to unlock the door. After unlocking, reattach the decorative cover. The Baojun 510 is a compact SUV launched by SAIC-GM-Wuling. The dimensions of this vehicle are 4220mm in length, 1740mm in width, and 1615mm in height, with a wheelbase of 2550mm. The minimum ground clearance is 185mm when unloaded and 169mm when fully loaded.
18
2
Share

What to Do When a Ford Car Shows High Engine Temperature?

Ford car shows high engine temperature solution is: 1. Stop and check whether the radiator coolant is normal, and whether there is any leakage in the radiator or water pipes. If no abnormality is found through external inspection, you can replenish the coolant and continue driving; 2. If the temperature remains high after driving for a distance, and the coolant is found to be reduced after stopping and checking, it may be due to a perforation in the water jacket of the cylinder block causing coolant loss, leading to high temperature. This fault requires repair. Taking the Ford Focus 2021 Sedan 1.5L Manual Fengyue model as an example, its body dimensions are 4647mm in length, 1810mm in width, 1468mm in height, and the wheelbase is 2705mm.
2
0
Share

How to Check if the Engine Oil is Sufficient?

Automobiles are usually equipped with an oil dipstick to check the oil storage level. The dipstick has clear upper and lower limits marked as H and L, where H represents the highest oil level (upper limit) and L represents the lowest oil level (lower limit). When the oil level falls below the L mark, the vehicle's oil warning light will illuminate, alerting the owner that the engine oil is insufficient and needs to be replenished promptly. More information about automotive engine oil is as follows: 1. As long as the oil level is between the upper and lower marks or at the 3/4 position, the vehicle's oil level is still sufficient for normal operation. 2. When checking the oil, the vehicle must be parked and turned off, placed on a level surface, and the oil should be checked three to five minutes after turning off the engine to ensure accuracy.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.