···
Log in / Register

How Should Beginners Cross Speed Bumps?

4 Answers
JudahLynn
09/01/25 7:09am
Beginners should slow down in advance when crossing speed bumps, allowing both wheels to pass over the bump slowly and simultaneously. This method provides good protection for the vehicle's chassis, so the correct way to cross a speed bump is to pass over it vertically. Avoid crossing speed bumps with only one side of the car, as this concentrates all the impact force on one side. Over time, this can lead to misalignment and deformation of the suspension, issues with wheel alignment, and uneven tire wear. Speed bumps are designed to remind drivers to slow down and are typically installed at locations such as road intersections, toll booths, gas stations, entrances to businesses, schools, residential areas, and other areas where vehicles need to slow down or where accidents are more likely to occur, thereby enhancing safety. Before crossing a speed bump, reduce your speed to 20 kilometers per hour, as failing to slow down can accelerate the wear of the tire's rubber surface, cause the car to veer, and negatively impact the lifespan of the tires, rims, and chassis suspension.
Was this review help?
18
3
Share
DiAustin
09/14/25 2:57am
When going over speed bumps, I always advise beginners to slow down and reduce their speed to around 20km/h when approaching, then proceed smoothly. Speed bumps are designed to remind drivers to slow down. If you go over them too fast, the car will jolt violently, which not only makes passengers uncomfortable but can also damage the car's suspension system. I've seen many beginners, due to nervousness or inexperience, slam on the brakes or swerve suddenly when encountering speed bumps, resulting in severe body sway, accelerated tire wear, and potential passenger injuries. The key is to slow down one or two meters in advance and drive straight over the center of the speed bump to maintain body stability. Practicing a few times in residential areas or parking lots will help you get the hang of it. Be extra cautious on rainy days—speed bumps become more dangerous on wet roads, so slow down to ensure safety. With more practice, muscle memory will develop, and you'll gradually feel much steadier while driving, especially in urban areas where speed bumps are common. This skill is crucial to avoid many minor accidents.
Was this review help?
10
1
Share
Expand All
StMarley
10/28/25 3:40am
For beginners crossing speed bumps, the key lies in controlling speed and vehicle angle. Personally, I believe reducing speed to 15-30km/h is the safest approach. Going too fast creates strong impacts that can wear suspension components, potentially leading to repair costs in the long run. Try observing the height and position of speed bumps, passing through slowly with the front wheels perpendicular to the bump. Avoid crossing at an angle or sudden braking/accelerating - these actions not only create uncomfortable jolts but also risk tire damage. As an auto enthusiast, I often remind friends that different vehicle types (high-clearance SUVs or low-slung sedans) all require similar techniques - maintaining steady speed. Beginners can practice on empty roads first. Remember, speed bumps aren't enemies - they help develop safe driving habits. When encountering consecutive speed bumps, stay calm and tackle them one by one. Watching simple driving tutorials regularly will make crossing bumps a natural action, earning you compliments from passengers for smooth driving. This skill proves particularly useful when transitioning from highways to urban areas, protecting both vehicle and occupants.
Was this review help?
11
4
Share
Expand All
Kirsten
12/11/25 3:56am
When I first started driving, I often bumped over speed bumps. Later, I learned to slow down in advance, reduce the speed to a low gear, and then pass steadily. Beginners, don't rush. Find some open places to practice, such as the speed bumps in the community parking lot. Try driving over them slowly first to get a feel for it. The key is to align the center of the speed bump and drive vertically over it, avoiding sharp turns or slamming on the brakes, which can cause severe bumps and potentially damage the car's chassis. After practicing a few times, you'll be able to control the throttle and brakes better, and the car won't shake too much. I also found that if I had friends in the car and went over too harshly, they would complain. So, I always remind myself: speed bumps are not a challenge but a reminder to drive safely. Take it slow. It's normal for beginners to make mistakes, but correcting them quickly ensures safety.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

How to Remove the Mazda3 Radiator?

To remove the Mazda3 radiator, first detach the radiator frame, disconnect the upper and lower hoses, and then take out the radiator. The car radiator generally refers to the cooling radiator. The maintenance methods for the car radiator are as follows: 1. Park the vehicle and turn off the engine. After the coolant temperature drops, open the expansion tank and add radiator cleaner; 2. Start the engine and let it idle for 5-10 minutes after the cooling fan starts working; 3. Turn off the engine and remove the front bumper. Ensure all fixing screws are loosened during removal, and slowly detach from both ends to the middle to avoid breaking the fixing clips; 4. After ensuring the coolant has completely cooled, drain the radiator cleaner along with the coolant, and finally replace it with new engine coolant.
15
1
Share

How to adjust the time on Volkswagen Bora?

Volkswagen Bora time adjustment method is introduced as follows: The time on the Volkswagen Bora dashboard can be adjusted via the buttons below the dashboard display. First, press the left menu button until the numbers on the trip computer flash, then use the right button to adjust. Here is some extended information about conventional automobile instruments: 1. Conventional automobile instruments: speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging gauge, etc. 2. Most instrument displays rely on sensors: sensing devices change their resistance value based on the state changes of the monitored object, which is then displayed through the instruments.
10
2
Share

What kind of car is Peugeot?

Peugeot is a French automobile brand. Here is some information about Peugeot: 1. Development History: In 1976, Peugeot merged with Citroën to form PSA Peugeot Citroën; In 1992, PSA Peugeot Citroën partnered with Dongfeng Motor Group to establish Dongfeng Peugeot Citroën Automobile, expanding into the Chinese automotive market; In 2011, PSA Peugeot Citroën collaborated with Changan Automobile to form Changan PSA Automobiles, introducing its luxury brand DS to China. 2. Peugeot Logo: The Peugeot emblem features a lion, which is the family crest of the Peugeot family.
20
1
Share

What is the displacement of the Sagitar 280TSI?

The displacement of the Sagitar 280TSI is 1.4T. More information about the Sagitar is as follows: 1. The Sagitar adopts Volkswagen Group's leading 'TSI+DSG' golden power combination, with the entire lineup equipped with EA211 1.2TSI and 1.4TSI high-power engines. 2. The 280TSI model has a maximum power of 110kW (150PS)/5000-6000rpm and a maximum torque of 250N·m/1750-3000rpm, paired with a 7-speed DSG transmission. 3. The entire lineup comes standard with an electronic parking system, and high-end models offer 10-color ambient lighting, which can switch between economy, comfort, and sport modes.
17
3
Share

How to Adjust the Dashboard Lights of Nissan Tiida?

Nissan Tiida's dashboard light adjustment is located on the left side of the steering wheel, where there is a dashboard control button for direct adjustment. Below is relevant information about dashboard lights: 1. Indicator Lights: The most common lights seen while driving, such as headlight signals, turn signals, parking lights, etc. Their function is to indicate the status of various vehicle features. 2. Warning Lights: These have an alert function, such as fuel indicator lights, door status indicators, seatbelt warning lights, etc. Generally, warning lights turn off after the driver performs the corresponding action. 3. Malfunction Indicator Lights: These are the most critical indicators, such as generator fault lights, transmission fault indicators, etc. These malfunction lights rarely illuminate under normal circumstances or may light up briefly when starting the engine and then turn off. If a malfunction indicator remains lit and is accompanied by a warning sound, it indicates that the vehicle has developed a fault or abnormality.
15
1
Share

How to turn on the interior door light of Trumpchi GS5?

There is a button on the middle of the interior door light. Pressing it does not turn on the light, but the light will automatically turn on when the door is opened and turn off when the car key is inserted. Additional information about it is as follows: 1. Halogen car lights are essentially a special type of incandescent lamp. The principle is that when current passes through a resistor, it heats up and emits blackbody radiation in the visible light spectrum when the temperature is high enough. 2. There are generally two types of halogen lamps: iodine tungsten lamps and bromine tungsten lamps, which work on the same principle. When an incandescent lamp is lit, although the filament temperature does not exceed the melting and boiling points of tungsten, a small amount of tungsten still evaporates at high temperatures.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.