How Often Should You Change Your Car's Transmission Fluid?

1 Answers
ElizaAnn
07/30/25 1:31am
Car transmission fluid should be changed every two years or 40,000 kilometers. Transmission fluid is an oil product that maintains the cleanliness of the gear system, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under harsh operating conditions. Depending on the transmission structure, transmission fluid is categorized into automatic transmission fluid (ATF) and manual transmission fluid. ATF is specifically designed for automatic transmissions, whereas early automatic transmissions used engine oil as a substitute. Manual transmission fluid, commonly referred to as gear oil, is used for lubricating high-impact, demanding operating conditions such as hypoid gear drive shafts and manual transmissions.
Was this review help?
17
0
Share
More Forum Discussions

What is the Difference Between Regular Tires and Snow Tires?

The differences between regular tires and snow tires are: 1. Different appearance: Regular tires have symmetrical tread patterns; snow tires have asymmetric directional tread patterns. 2. Different materials: Regular tires are made of natural rubber; snow tires are made of a silica-mixed rubber. The functions of tires are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To reduce and absorb vibrations and impact forces during driving, preventing severe vibrations and early damage to vehicle components; 4. To adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring safety, handling stability, comfort, and energy efficiency.
8
1
Share

What is the tire pressure for the X-Trail?

The tire pressure for the X-Trail is 2.5bar. Hazards of excessive tire pressure: 1. The friction and adhesion of the tires will decrease, affecting braking performance; 2. It can cause steering wheel vibration and deviation, reducing driving comfort; 3. It accelerates the localized wear of the tread pattern in the center of the tire, shortening the tire's lifespan; 4. Increased body vibration can indirectly affect the lifespan of other components. Taking the 2021 X-Trail as an example, it is a compact SUV with the following dimensions: length 4675mm, width 1820mm, height 1722mm, wheelbase 2706mm, minimum ground clearance 208mm, and a body weight of 1489kg.
1
0
Share

What is the method to reset the maintenance light on Chery A5?

Chery A5 maintenance light reset method is: 1. Turn off the ignition switch; 2. Simultaneously press and hold the two arrow buttons, then turn on the ignition switch; 3. After 3 seconds, release the two arrow buttons; 4. The maintenance menu will appear, asking if you want to reset; 5. Press and hold the SET button for more than 3 seconds; 6. Press the MODE button; 7. Turn off the ignition switch to complete the reset. Taking the 2019 Chery A5 as an example, it is a compact car with body dimensions of: length 4552mm, width 1750mm, height 1483mm, wheelbase 2600mm, minimum ground clearance 147mm, and curb weight 1285kg.
9
2
Share

How to Adjust the Clock on Chery Tiggo 3?

To adjust the clock on the Chery Tiggo 3, follow these steps: 1. Turn off the ignition switch and set the headlight switch to the first position. 2. Press and hold the adjustment button until the hour field flashes, then release it. Adjust the hour by pressing the adjustment lever. 3. After setting the hour, the display will automatically switch to minute adjustment. Adjust the minutes by pressing the adjustment lever. Taking the 2020 Chery Tiggo 3 as an example, it is a compact SUV with the following dimensions: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, minimum ground clearance 190mm, and curb weight 1358kg.
14
3
Share

What is the difference between a car DSP and an amplifier?

The differences between a car DSP and an amplifier are: 1. Connectivity to a computer: A DSP can be connected to a computer for better amplifier management, while an amplifier cannot connect to a computer. 2. Functionality: A DSP can perform active frequency division and delay processing, whereas an amplifier lacks DSP processing capabilities. A DSP is a microprocessor that processes large amounts of information using digital signals. Its working principle involves receiving analog signals, converting them into digital signals (0 or 1), modifying, deleting, or enhancing these signals, and then translating the digital data back into analog data or real-world formats in other system chips. An amplifier, or car audio power amplifier, is responsible for selecting and preprocessing input audio signals, amplifying their power to drive speakers effectively.
13
1
Share

Is a Patched Tire More Prone to Blowouts?

A patched tire is not more prone to blowouts. The functions of a tire are: 1. To support the entire weight of the vehicle and bear the load of the car; 2. To transmit traction and braking torque, ensuring the adhesion between the wheels and the road surface; 3. To reduce and absorb the vibrations and impacts during driving, preventing severe vibrations and premature damage to car components. Methods for tire maintenance include: 1. Regularly removing stones stuck in the tire treads; 2. Minimizing exposure to direct sunlight; 3. Frequently checking tire pressure; 4. Paying attention to suspension maintenance; 5. Regularly inspecting front wheel alignment; 6. Adopting careful driving habits, choosing smooth roads to avoid objects that can puncture or scratch the tires, and steering clear of chemical spills that may corrode the tires.
2
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.