How Often Should Wheel Alignment Be Done?

1 Answers
VonElijah
07/29/25 8:17pm
It is generally recommended to perform a wheel alignment every 20,000 kilometers or once a year. Here is some related information about wheel alignment: 1. Definition: Wheel alignment is based on the four-wheel parameters of the vehicle and involves adjustments to ensure good driving performance and a certain level of reliability. The installation of the steering wheels, steering knuckles, and front axle in a car has specific relative positions, and this type of installation with specific relative positions is called front wheel alignment. 2. Functions: Ensures vehicle stability; extends tire lifespan; enhances driving comfort; reduces wear and tear on chassis suspension components.
Was this review help?
17
2
Share
More Forum Discussions

Can Tire Bolts Loosen Over Time?

Automotive tire bolts tightened clockwise to the proper position will not loosen under normal conditions. Exceptions include: 1. When tightening the bolts, if the jack has already been removed prematurely, the bolts may not be properly seated. 2. During tightening with the jack supporting the vehicle and the tire off the ground, if the bolts are hand-tightened until they won't turn further, use a tire wrench to apply slight diagonal force, ensuring no gap exists between the tire and brake disc. 3. After lowering the jack and removing it, tighten the bolts in a crisscross or diagonal pattern using a tire wrench to ensure even distribution of force on all bolts. 4. After final tightening, perform a test drive. After driving 50-100 kilometers, check the bolt condition for any loosening. If necessary, support with the jack again and repeat the above steps, ensuring uniform force application. 5. Both bolts and studs should be replaced simultaneously when needed. 6. If the bolt holes on the wheel rim have become enlarged, the bolts cannot be properly tightened, rendering them ineffective for securing the wheel.
13
2
Share

Can You Keep Driving When the Coolant Warning Light Comes On?

When the coolant warning light comes on, it is not advisable to continue driving the vehicle. Here are some details about automotive coolant: 1. After the coolant warning light illuminates: It is not recommended to keep driving the car. When the coolant level is low, the engine generates extremely high temperatures during operation, and without coolant, the engine cannot function properly. 2. The coolant used in cars must meet the vehicle's specifications: You can check the coolant level by opening the engine hood. 'Min' indicates the lower limit, and 'Max' indicates the upper limit. The coolant level should be between these two marks. 3. Driving with low coolant levels: Continuing to drive under such conditions may lead to rising engine temperatures, potentially causing severe damage to the engine. The primary function of coolant is to dissipate heat from the engine. Without coolant, the engine's cooling system fails, significantly reducing the vehicle's safety.
18
5
Share

What is the correct approach when a large passenger bus experiences brake failure and loses control?

When a large passenger bus experiences brake failure and loses control, the correct approach is to steer into an emergency escape lane, use engine braking, apply the parking brake, and if necessary, use the vehicle body to scrape against roadside obstacles to slow down. Quickly use the handbrake and shift to a lower gear, maintain control of the steering wheel, promptly avoid obstacles, and drive the vehicle to a safer location. Below are precautions for driving on highways: 1. Drive in the designated lane: Highways have clearly marked lanes for large vehicles, small vehicles, etc. When overtaking, once you occupy a lane, return to your appropriate lane promptly after completing the overtaking maneuver, and avoid occupying other lanes for extended periods. Additionally, emergency lanes should not be occupied unless for special reasons. 2. Maintain a safe speed and avoid speeding: The dangers of speeding are well-known, as it can lead to irreversible consequences both on local roads and highways. 3. Maintain a safe following distance: Under normal conditions, on dry roads with good braking, the following distance (in meters) should not be less than the speed (in km/h). For example, at 80 km/h, the distance should be no less than 80 meters; at 100 km/h, no less than 100 meters. Always pay attention to roadside distance markers. In rainy, foggy, snowy, or wet road conditions, the following distance should be doubled. 4. Observe traffic signs: Always be aware of roadside and overhead signs and markings while driving, and stay slightly to the right to avoid running over the right lane divider, allowing sufficient lateral distance for overtaking vehicles. 5. Do not arbitrarily occupy emergency lanes during accidents: Traffic incidents are inevitable on highways. If other vehicles cause an accident leading to lane blockage, do not occupy the emergency lane, as this may hinder rescue vehicles from performing their duties. 6. Avoid fatigued driving and take timely breaks: Fatigued driving is extremely dangerous on highways. When fatigued, a driver's reaction time slows, making it difficult to respond appropriately to sudden situations.
1
5
Share

How to Set Up One-Touch Window Roll-Up?

One-touch window roll-up setup: First, press the vehicle's one-touch start button to power on the vehicle. Then, continuously pull the one-touch window roll-up button on the left door armrest. While holding the window roll-up button, press the button on the left multifunction steering wheel. Next, press the SET button on the right multifunction steering wheel to complete the one-touch window roll-up function setup. Below is related information about the one-touch window function: 1. With standard power windows, you need to hold the switch until the window reaches the desired position, then release the button to stop the movement. Cars equipped with one-touch windows have a two-stage window control switch. The first position works like a standard power window. The second position allows the window to automatically open or close completely with just one press and release. 2. Nowadays, most mid-to-high-end models come with one-touch window functionality, primarily for the convenience of drivers and passengers. This feature helps prevent drivers from being distracted by operating windows, thereby improving safety. 3. One-touch windows usually come with an "anti-pinch" feature to avoid the risk of pinching fingers.
15
3
Share

What are the highlights of the Earth Dreams engine?

Earth Dreams engine highlights are detailed as follows: 1. Gasoline engine with the highest power performance and fuel efficiency globally: Honda has continuously refined its unique VTEC (Variable Valve Timing and Lift Electronic Control) technology, developing a new series of engines with excellent scalability and advanced architecture. The aim is to thoroughly improve thermal efficiency and reduce friction losses. The new generation engine series includes multiple displacement levels such as 660cc, 1.5L, 1.8L, 2.4L, and 3.5L, each achieving a perfect balance of high performance and low fuel consumption. 2. World's lightest compact diesel engine: Featuring top-tier acceleration performance and fuel economy, the engine's optimal design for rigidity and combustion pressure includes an open-deck all-aluminum cylinder block, resulting in the world's lightest 1.6L diesel engine. The existing 2.2L engine has been further downsized while thoroughly reducing mechanical friction across all components, achieving friction levels comparable to existing gasoline engines. Improvements to the cooling system optimize thermal efficiency, reducing CO2 emissions by over 15%. The adoption of a turbocharger reduces the weight of reciprocating components, delivering agile and responsive driving performance.
12
2
Share

What are the differences between the Volkswagen Golf 7th generation and 7.5th generation?

The Golf is Volkswagen's most successful product following the Beetle. The 7th generation Golf has been in production since 2012, with the 2017 model introducing the Volkswagen Golf 7.5th generation facelift. The differences between the Golf 7th generation and 7.5th generation are as follows: 1. The Golf 7.5 features a redesigned bumper, new LED daytime running lights, a new grille, and new wheel arch designs. 2. The Golf 7.5 is the first to come with a 12.3-inch large LCD screen, leather-wrapped steering wheel, a 9.2-inch LCD screen, and adds an in-car PM2.5 filtration system. 3. The most significant highlight of this mid-cycle facelift is that the 1.4T models have switched from the semi-independent suspension of the original Golf 7th generation to an independent suspension.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.