How Often Should Vehicles Be Inspected After the 6-Year Exemption?

1 Answers
Ava
07/29/25 4:15pm
After the six-year exemption from inspection for motor vehicles, those over 6 years old must be inspected once a year. According to the relevant provisions of the "Regulations for the Implementation of the Road Traffic Safety Law": Article 16. Motor vehicles should undergo safety technical inspections within the following periods from the date of registration. The documents required for vehicle annual inspection include the vehicle's driving license, valid compulsory insurance policy, the owner's ID card, and all traffic violation records must be cleared in advance. Safety technical inspections should be conducted within the following periods: Operational passenger vehicles must be inspected once a year within 5 years; those over 5 years old must be inspected every 6 months. Trucks and large or medium-sized non-operational passenger vehicles must be inspected once a year within 10 years; those over 10 years old must be inspected every 6 months. Small and mini non-operational passenger vehicles must be inspected once every 2 years within 6 years; those over 6 years old must be inspected once a year; those over 15 years old must be inspected every 6 months. Motorcycles must be inspected once every 2 years within 4 years; those over 4 years old must be inspected once a year. Tractors and other motor vehicles must be inspected once a year. Operational motor vehicles that pass safety inspections within the specified period. Therefore, non-operational motor vehicles are exempt from inspection for the first six years, then inspected once every two years from 6 to 10 years, and vehicles over 10 years old must be inspected once a year, while those over 15 years old must be inspected every 6 months. Vehicle annual inspection mainly includes the following items: Appearance inspection: Mainly checks vehicle lights, body appearance, suspension, sunroof, and tires. It verifies if the lights are functioning normally, if there are any non-working lights, if the body color has been changed, or if the suspension has been modified. Emission inspection: Checks whether the tailpipe emissions meet national standards during high-speed operation. On-road inspection: Primarily examines the vehicle's braking system, headlights, horn, and chassis. Violation check: All traffic violation records must be cleared before the annual inspection to pass. Vehicle annual inspections can be conducted up to 90 days in advance but must not be overdue. According to Article 47, Paragraph 4 of the "Motor Vehicle Registration Management Measures," vehicles that fail to undergo safety technical inspections within the specified period will be warned or fined by the public traffic management department. Only after paying the fine can the annual inspection be conducted. Consequences of failing to inspect on time include: Vehicles that do not undergo annual inspection on time are not allowed on the road. Driving a vehicle without timely annual inspection results in 3 penalty points and a fine. If an uninspected vehicle is involved in a traffic accident, the owner bears full or primary responsibility, and the insurance company will not compensate. Driving without timely annual inspection is considered illegal and may result in vehicle impoundment.
Was this review help?
4
4
Share
More Forum Discussions

How to Check the Age of Tires?

Locate the DOT on the sidewall of the tire; the last four digits of the DOT indicate the production date of the tire. The typical service life of car tires is 5 years or 60,000-80,000 kilometers. More details about the tire date code are as follows: 1. The tire date code consists of four digits: "AABB." The first two digits "AA" indicate the week of the year, and the last two digits "BB" indicate the year. 2. For example, if the DOT code is "3513," it means the tire was produced in the 35th week of 2013. If you cannot find the production date after the DOT, it might be on the other side of the tire. If you cannot find the DOT, the tire might be mounted inside out, with the production date on the inner side.
15
2
Share

What is the method for removing an oil filter?

The method for replacing an oil filter is as follows: 1. Drain the old oil by placing an oil drain pan underneath and using a wrench to loosen the drain plug screw counterclockwise, allowing the old oil to drip out; 2. Remove the oil filter after the old oil has been completely drained, open the engine oil cap, and use an oil filter wrench to loosen the oil filter counterclockwise, then unscrew the oil filter from the engine compartment; 3. Reinstall the oil filter by first placing a sealing ring over the oil outlet, then slowly screwing the new oil filter into place. Do not overtighten the oil filter—generally, hand-tighten it first, then use a wrench to tighten it an additional 3 to 4 turns; 4. Finally, add new oil to the engine oil tank.
18
2
Share

How to fix a small crack on the side of a car tire?

Solutions for a small crack on the side of a tire are as follows: 1. If the sidewall of the tire is scratched, it is essential to replace the tire as soon as possible to avoid the risk of a high-speed blowout. 2. If the damage to the contact surface exceeds 4mm, the tire must also be replaced promptly, as both internal and external repairs pose potential dangers. 3. It is not advisable to use the vehicle before inspecting and repairing the tire (especially if the front tire is damaged). It is recommended to remove the tire to check for internal punctures. Considering safety, if the puncture is in this location, repair is not recommended, and replacement is necessary. 4. If a small crack on the side of the tire damages the cord fabric, the tire should be replaced immediately.
10
5
Share

What is the difference between Audi A3 and S3?

Audi S3 will be equipped with a high-power version of the 2.0TFSI engine, paired with a 6-speed S-tronic dual-clutch transmission, and the S3 will also come standard with the Quattro all-wheel-drive system. The Audi A3 is developed based on the Volkswagen MQB platform, featuring lightweight design and aluminum materials, and is powered by multiple engines including the 1.4TFSI and 1.8TFSI. The differences between the Audi A3 and S3 are as follows: 1. Different series: one is the S series, which is Audi's high-performance model, while the other is just the ordinary A series. 2. Different performance: Although both the S3 and A3 use a 2.0T engine with the same size cylinder block, the S3 can actually deliver 50kW and 30Nm more power than the A3.
13
2
Share

What to Do During the Driving Test (Subject Three) on a Rainy Day?

When encountering rainy weather during the Subject Three road test, it's important to reduce speed, maintain a safe distance, and control the throttle. Additionally, use the windshield wipers to clear rainwater; otherwise, the water on the windshield can blur visibility and compromise driving safety. Key points to remember during the Subject Three road test on a rainy day: 1. Adjust Your Mindset If it rains during the Subject Three test, first adjust your mindset—stay calm and avoid being affected by the weather. 2. Control Your Speed Drive slower than usual during rainy conditions. Safety comes first, and examiners also prioritize safe driving over test performance. 3. Maintain a Safe Distance Keep a sufficient distance from the vehicle ahead during the test. Avoid sudden braking; instead, use gentle or intermittent braking to prevent test failure. 4. Manage the Throttle When passing through waterlogged areas or under bridges, shift to a low gear, maintain steady throttle control, and proceed slowly without stopping, shifting gears, or making sharp turns to avoid stalling the vehicle. 5. Use Windshield Wipers Since practice sessions often occur in good weather, you might forget about the wipers. However, during the rainy test, remember to turn them on. The wiper switch is located on the lower right side of the steering wheel, opposite the turn signal switch. Adjust the wiper speed according to rainfall intensity.
14
0
Share

What are the dimensions of the trunk of the 2020 Haval H6?

2020 Haval H6 trunk dimensions: trunk height is 910mm, maximum depth is 1620mm, minimum depth is 1010mm, and minimum width is 1040mm. Relevant details are as follows: 1. The Haval H6's luggage compartment has a volume of 808L, which can be expanded to a maximum of 2010L when the rear seats are folded down. The luggage compartment is pre-equipped with two horizontal partitions, allowing the space to be divided into three independent areas for convenient storage of miscellaneous items. 2. In terms of trunk space, the interior of the Haval H6 is relatively flat, and the net pocket on the right side can be used to store small items that are prone to rolling around.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.