How often should the Volkswagen engine belt be replaced?

Where Can Tire Pressure Be Monitored?

Tire pressure monitoring devices vary based on the installation location of the sensors. Common tire pressure monitoring devices are usually found in the vehicle's onboard computer, while others may be located on the central console. The methods for monitoring tire pressure are as follows: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire's air pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. When the tire pressure is too low or there is a leak, the system will automatically issue an alert. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring Systems (TPMS): TPMS combines the advantages of both systems mentioned above. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only a direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect when multiple tires simultaneously have low pressure. However, it still cannot provide real-time data on the actual pressure in all four tires, as a direct system can.

15

4

Share

What should I pay attention to when driving long-distance on the highway for the first time?

For the first time driving long-distance on the highway, you need to pay attention to: 1. Control your speed. The highway has strict speed limits. According to national regulations, the maximum speed on the highway must not exceed 120 km/h, and the minimum speed must not be lower than 60 km/h. Driving too fast increases the likelihood of traffic accidents, while driving too slowly can obstruct vehicles behind you and reduce the efficiency of the highway. 2. In case of strong winds, rain, snow, fog, or icy road conditions, you should reduce your speed and turn on the fog lights based on visibility. When visibility is less than 200 meters, turn on the fog lights, low beams, side marker lights, and front and rear position lights, and keep your speed below 60 km/h. Maintain a distance of at least 100 meters from the vehicle in front in the same lane. 3. When visibility is less than 100 meters, turn on the fog lights, low beams, side marker lights, front and rear position lights, and hazard warning flashers, and keep your speed below 40 km/h. Maintain a distance of at least 50 meters from the vehicle in front in the same lane. 4. When visibility is less than 50 meters, turn on the fog lights, low beams, side marker lights, front and rear position lights, and hazard warning flashers, and keep your speed below 20 km/h. Exit the highway at the nearest exit as soon as possible.

1

0

Share

Do Modern Cars Need to Be Filled with Water?

Modern cars do not need to be filled with water. Windshield washer fluid is added near the front of the car, while antifreeze is added near the windshield. Neither windshield washer fluid nor antifreeze can be replaced with water. The methods for car maintenance are as follows: 1. Warm up before starting: For fuel-injected cars, turn the key to the second position and wait 5-10 seconds before starting. This is because the fuel pump begins working when the ignition is turned on, adjusting fuel pressure and injection volume. Starting after a few seconds is beneficial for the car's starter and engine. After starting, most people are accustomed to letting the engine idle until the coolant reaches normal temperature before driving away. However, this warm-up method is incorrect because, unlike carburetor engines, fuel-injected engines cannot operate the fuel supply system properly until they reach working temperature. Forced driving may result in unstable RPMs or stalling. Therefore, idling to warm up a carburetor engine is a last resort. 2. Avoid high-speed driving: New cars have speed limits during the initial break-in period. Domestic cars are generally limited to 40-70 km/h, while imported cars are usually limited to within the first 1,000 km, with full-throttle speed not exceeding 80% of the maximum speed. It is also important to monitor the engine tachometer and speedometer to ensure the engine and vehicle operate at moderate speeds. 3. Avoid overloading: Overloading a new car can damage its components. Therefore, within the first 1,000 km, domestic cars should not exceed 75%-80% of the rated load, while imported cars should not exceed 90%. Additionally, choose smoother road surfaces to minimize excessive vibration, impact, or sudden braking, reducing stress on the body and powertrain.

16

1

Share

Is It Serious If the Duplicate of the Vehicle License Is Lost?

Losing the duplicate page of the vehicle license affects driving as it constitutes damage to the license and requires timely reissuance. If the vehicle license is lost, the vehicle cannot be driven on the road. If driven, the traffic management department of the public security organ may impound the vehicle and may issue a warning or impose a fine in accordance with Article 90 of the Road Traffic Safety Law. The vehicle license mainly records motor vehicle information and consists of three parts: the license holder, the main page, and the duplicate page. The main page records the license plate number, vehicle type, brand, usage nature, owner's name, address, engine number, vehicle identification number, registration date, and issuance date, while the duplicate page records the file number, vehicle plate, weight, dimensions, approved passenger capacity, and annual inspection records. If the vehicle license is lost, the vehicle cannot undergo its annual inspection. The owner must apply for a replacement within the vehicle's regular inspection cycle. If the application for a replacement is made beyond the inspection cycle, the relevant regulations for overdue vehicle inspections will apply: If the motor vehicle license is lost or damaged, the owner should apply for a replacement or reissuance at the vehicle registration office; Bring the owner's ID card and the motor vehicle registration certificate. Go to the vehicle management office to fill out the application form for reissuing the motor vehicle license, and take impressions of the frame number and engine number for vehicle inspection, take photos, and pay fees (for the certificate and photos); The vehicle management department should reissue or replace the motor vehicle license within one day of accepting the application.

15

2

Share

What is the Written Test for Subject Three?

Subject Three Written Test is commonly known as Subject Four. Subject Four, also referred to as Subject Three Safety and Civilized Driving Knowledge, or Subject Four Theoretical Test, or Driver's Theoretical Test, is part of the assessment for obtaining a motor vehicle driver's license. After the implementation of the "Ministry of Public Security of the People's Republic of China Order No. 139," the Subject Three test was divided into two parts: the road test and the addition of a safety and civilized driving knowledge test, commonly known as "Subject Four," which evaluates "driving ethics." Since this test is conducted after Subject Three, it is commonly referred to as the Subject Four test. Officially, there is no designation as Subject Four. The test consists of 50 questions, primarily in the form of case studies, images, animations, etc., with a total score of 100 points, and a passing score of 90. The main content includes: safety and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-traffic accident handling knowledge. Based on the type of driver's license being tested, 50 questions are proportionally selected from the corresponding Subject Four test question bank. For small vehicle licenses, questions are selected from a pool of 1,240, while for large vehicle licenses, they are selected from 1,235 questions, with each question worth 2 points. The test duration is 45 minutes, and if 12 points (6 questions) are answered incorrectly during the test, the session is terminated. Failing Subject Four does not require retaking previously passed tests (Subject One, Subject Two, Subject Three). Candidates can schedule a retest on their own, and no additional fees are required for the retest. There are no scheduling restrictions for the safety and civilized driving theoretical test, but the driving skills test permit is valid for three years. If the applicant does not complete the test within the validity period, the passed subject scores will be invalidated.

16

4

Share

How to Set Up Automatic Locking for Toyota Cars?

Before setting up the automatic locking, ensure the gear is in the P position, then turn the key to the ON position and close all four doors simultaneously. Next, press and hold the lock button for more than 6 seconds until the hazard indicator on the dashboard flashes twice, indicating the setup is complete.

9

3

Share

How often should the Volkswagen engine belt be replaced?

Where Can Tire Pressure Be Monitored?

What should I pay attention to when driving long-distance on the highway for the first time?

Do Modern Cars Need to Be Filled with Water?

Is It Serious If the Duplicate of the Vehicle License Is Lost?

What is the Written Test for Subject Three?

How to Set Up Automatic Locking for Toyota Cars?

What does the P in automatic transmission mean?

What is the correct method to check car engine oil?

Can an automatic car be shifted into neutral while driving?

Is U-turn Allowed at a Red Light Intersection?