How often should the UY gear oil be changed?

2 Answers
McLydia
07/29/25 4:02am
UY gear oil should generally be changed every 60,000 kilometers. The specific details are as follows: 1. Purpose of replacement: It can effectively improve the efficiency of gear transmission of engine power. 2. Replacement interval: Mainly based on mileage or usage time. If the vehicle manual clearly provides these two indicators, the earlier one must be followed. Information about gear oil is as follows: 1. Gear oil: (Gear-oil) is a type of lubricating oil mainly composed of petroleum lubricating base oil or synthetic lubricating oil, with the addition of extreme pressure anti-wear agents and oiliness agents. 2. Function: Gear oil mainly lubricates gears and bearings, prevents wear and corrosion, helps dissipate heat from gears, and is used in various gear transmission devices to extend their service life and improve power transmission efficiency.
Was this review help?
19
3
Share
StMargaret
08/12/25 7:47am
I've been driving my old car for several years now, and I'm particularly concerned about the gear oil. Transmission fluid is crucial for vehicle protection. For manual transmission cars, it's recommended to change it every 40,000-60,000 kilometers, while for automatic transmissions, changing it every 60,000-80,000 kilometers is more prudent. If you frequently drive on mountain roads or enjoy rapid acceleration, you should change it even more frequently. A neighbor of mine who works at a repair shop mentioned that deteriorated oil can contain metal shavings, which accelerate gear wear. Last time I had a check-up at 30,000 kilometers, the mechanic used a special testing pen and found the acid value exceeded the standard, so it was replaced immediately. Don’t just focus on the mileage; driving habits and environment should also be considered. If you’re often stuck in traffic or live in a cold region, you should change it earlier. For specifics, you can refer to the maintenance manual—manufacturer recommendations are the most reliable.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

How to Apply for ETC?

ETC application process: 1. Locate a local ETC-affiliated bank; 2. Visit the bank branch to inquire and apply; 3. Bring your ID card, vehicle license, and bank card, then fill out the application form; 4. Install the device and test whether the signal can be received on the inner side of the windshield; 5. When passing through the ETC lane, it's best to keep the speed below 20 kilometers per hour; 6. Payment methods include credit card settlement and prepaid account settlement. With this system, car owners only need to install a transponder card on their windshield and prepay the fees. When passing through toll stations, there's no need for manual payment or stopping, as the toll will be automatically deducted from the card. This toll collection system takes less than two seconds per vehicle.
15
4
Share

Which country is Subaru from?

Subaru is a Japanese car manufacturer, a subsidiary specializing in automobile production under Fuji Heavy Industries Ltd., established in 1953. Here is more information about Subaru: 1. Subaru is a Japanese automobile manufacturer that produces a range of sedans, SUVs, and sports cars, all of which consistently use horizontally opposed engines. 2. Subaru's SUV lineup includes the XV, Forester, and Outback. 3. The Subaru Outback is a mid-size SUV with dimensions of 4835mm in length, 1840mm in width, and 1673mm in height, a wheelbase of 2745mm, a 5-door, 5-seat SUV body type, naturally aspirated intake form, and a 2.5L-H4 engine.
10
3
Share

What are the aftereffects of windshield polishing?

The aftereffects of windshield polishing are: it can make the windshield unclear and cause visual distortion, with a significant change in clarity compared to before polishing, which is unsafe for driving. The main maintenance methods for the car's front windshield are: 1. Use special or suitable wiper blades and replace them in time; 2. Keep the glass surface clean; 3. Use automotive-specific glass cleaner. Extended content: The methods for car paint maintenance are: 1. Remove dust from the car body promptly to minimize the adsorption of dust by static electricity; 2. Rinse rain stains with clean water as soon as possible after rain to avoid damaging the paint; 3. Do not wash the car under scorching sun or high temperatures; 4. Use clean and soft cloths or sponges to wipe the car to prevent mixing in metal shavings and sand particles.
14
3
Share

Where is the Tiguan's air conditioning fuse located?

Inside the vehicle's fuse box (located behind the dashboard storage compartment cover). The automotive air conditioning system serves the following functions: 1. Temperature regulation: This is the primary function of car air conditioning. In summer, the cooling system produces cold air to lower the cabin temperature; in winter, except for large commercial vehicles that use independent combustion heaters, most vehicles utilize waste heat for warming. 2. Humidity regulation: Humidity significantly affects passenger comfort. Cabin humidity should generally be maintained between 30%-70%. Standard car AC systems don't have humidity control functionality - only through ventilation systems or advanced luxury vehicle integrated climate control systems. 3. Airflow regulation: Airflow speed and direction greatly impact comfort. For direct airflow, when temperature is appropriate, speed should be limited to a certain range, which can be adjusted based on passengers' living environment, age, health condition, and temperature preferences. 4. Air purification: Cabin air quality is crucial for comfort.
7
3
Share

Does the Southeast DX3 have cruise control?

The base model of the Southeast DX3 does not have cruise control, while the higher-end model is equipped with this function. Below are the steps to use the cruise control in the higher-end Southeast DX3 model: 1. When the DX3's speed reaches 40 KM/h or above, press the "CRUISE" button on the steering wheel. 2. A cruise control indicator light will illuminate on the dashboard, then press the "SET" button. 3. Release the button, and the cruise control will start working. Here is more information about cruise control: 1. The cruise control system, abbreviated as CCS, is also known as a speed control device, speed control system, or autonomous driving system. 2. Cruise control is used to maintain a constant speed for the vehicle. Once set to cruise mode, the engine's fuel supply is controlled by the computer, keeping the car at the preset speed without the need to operate the accelerator. 3. Using cruise control during long highway drives reduces driver fatigue by eliminating the need to control the accelerator pedal, while also minimizing unnecessary speed changes, which helps save fuel.
8
0
Share

Does the BMW Z4 have four seats?

No. The BMW Z4 is a two-seater. Below is relevant information about the BMW Z4: 1. Powertrain: The BMW Z4 is equipped with a 2.0-liter turbocharged engine and a 3.0-liter turbocharged inline six-cylinder engine. The 2.0-liter turbocharged engine delivers a maximum power of 197 horsepower and a peak torque of 320 Nm. 2. Overview: The BMW Z4 is a soft-top convertible sports car under the BMW brand. The vehicle's dimensions are 4336mm in length, 1867mm in width, and 1322mm in height, with a wheelbase of 2470mm. It features a double-joint spring strut front axle for the front suspension and a multi-link independent suspension for the rear suspension. The drivetrain configuration is front-engine, rear-wheel drive.
18
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.