How often should the transmission fluid of the Leiling Hybrid be replaced?

1 Answers
JoshuaDella
07/30/25 5:30am
The transmission fluid of the Leiling Hybrid should be replaced every 40,000 to 60,000 kilometers. Below is some relevant information about the Toyota Leiling: 1. Introduction: The Toyota Leiling is a compact sedan launched by Toyota. In addition to the hybrid version, there is also a fuel version available. The fuel version is equipped with a 1.2T turbocharged engine, which has a maximum power output of 85kW and a maximum torque of 185 Nm. 2. Transmission: The Toyota Leiling is matched with a CVT continuously variable transmission, which can simulate 10 gears. 3. Exterior: The all-new Leiling is the twelfth-generation model of the Toyota Corolla series, adopting the appearance of the North American version. The length and width of the body have been increased compared to the current model.
Was this review help?
4
1
Share
More Forum Discussions

What are the steps for changing engine oil and oil filter?

The steps for changing engine oil and oil filter are: 1. Remove the drain plug and drain the engine oil; 2. After draining, clean the drain plug; 3. Install and tighten the drain plug; 4. Loosen the oil filter with an oil filter wrench; 5. Apply engine oil to the O-ring of the new oil filter; 6. Hand-tighten the new oil filter onto the oil filter bracket; 7. Use the oil filter wrench to tighten the filter an additional three-quarters of a turn. Engine oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal against leaks, prevent rust and corrosion, and provide shock absorption. It consists of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve the deficiencies of the base oil.
15
4
Share

Where is the Peugeot 508's Cabin Air Filter Located?

Peugeot 508's cabin air filter is located on the inner side of the accelerator pedal. You need to remove the decorative panel in front of the instrument cluster to access the cabin air filter. The functions of the cabin air filter include: 1. Ensuring the filter tightly fits the housing to prevent unfiltered air from entering the cabin; 2. Separating dust, pollen, and abrasive particles from the air; 3. Maintaining clean air in the passenger compartment and preventing bacterial growth. The Peugeot 508 is a mid-size sedan with body dimensions of 4870mm in length, 1855mm in width, and 1455mm in height, with a wheelbase of 2848mm and a trunk capacity of 513 liters. The Peugeot 508 is equipped with a 1.6T turbocharged engine, delivering a maximum power of 125kW at 5500 rpm.
3
5
Share

What are the differences between the Odyssey Luxury Edition and the Odyssey Intelligent Enjoyment Edition?

The differences between the Odyssey Luxury Edition and the Odyssey Intelligent Enjoyment Edition are: 1. Different interiors: The Odyssey Luxury Edition has a beige interior, while the Intelligent Enjoyment Edition has a black interior. 2. Different weights: The Odyssey Luxury Edition has a curb weight of 1834 kg, while the Intelligent Enjoyment Edition has a curb weight of 1863 kg. The similarities between the Odyssey Luxury Edition and the Intelligent Enjoyment Edition are: 1. Same body structure: Both are 5-door, 7-seat MPVs. 2. Same body dimensions: Both have a length of 4845 mm, a width of 1802 mm, and a height of 1697 mm. 3. Same power: Both are equipped with a 2.4L naturally aspirated engine, with a maximum horsepower of 186 hp and a maximum power of 137 kW.
12
2
Share

Why doesn't the dashboard light up when the car is turned on?

The reasons why the dashboard doesn't light up when the car is turned on are: 1. The dashboard illumination light is faulty or damaged; 2. There is a short circuit in the power supply wire; 3. The power supply fuse is blown. The maintenance methods for the car dashboard are: 1. Soak a cloth in clean tap water and wipe the car dashboard; 2. Apply an anti-scratch protective film on the dashboard screen; 3. Spray cleaner on the dashboard and wipe it off with a soft cloth. The car dashboard is a device that reflects the working conditions of various vehicle systems. The solutions for it not lighting up are: 1. Replace the dashboard power supply fuse; 2. Replace the dashboard illumination light; 3. Replace the dashboard power supply wire.
5
0
Share

What are the differences between the Livina X-Gear and the standard version?

The differences between the Livina X-Gear and the standard version are: 1. Different body dimensions: The Livina X-Gear measures 4308mm in length, 1734mm in width, and 1630mm in height; the standard version measures 4249mm in length, 1699mm in width, and 1577mm in height. 2. Different curb weights: The Livina X-Gear has a curb weight of 1178kg; the standard version weighs 1146kg. Both the Livina X-Gear and standard version belong to the compact car category, and they share the following similarities: 1. Same engine: Both are equipped with a 1.6L naturally aspirated engine delivering 124 horsepower and 91kW maximum power. 2. Same transmission: Both are paired with a 5-speed manual transmission.
10
0
Share

What are the inspection methods for the water temperature gauge and its control circuit?

The inspection methods for the water temperature gauge and its control circuit are: 1. Replace or install the thermostat; 2. Replace the fan; 3. Replace the thermal switch; 4. Replace the fuse and check the circuit; 5. Clean the radiator tubes and fins. The normal range for the water temperature gauge is between 70 to 90 degrees Celsius, and its function is to indicate the temperature of the coolant in the radiator when the engine is operating. The engine requires a certain operating temperature for normal operation, and temperatures that are too high or too low are detrimental to the engine's performance and normal operation. The reasons for excessively high water temperature gauge readings are: 1. Insufficient coolant due to fluid loss or leakage; 2. Abnormal heat dissipation caused by a faulty cooling fan; 3. Abnormal circulation and heat dissipation due to a faulty water pump; 4. Engine malfunction and cooling system failures. The reasons for excessively low water temperature gauge readings are: 1. Damaged thermostat; 2. Cooling fan running continuously.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.