How Often Should the Transmission Fluid of Nissan Teana Be Changed?

1 Answers
DelElliot
07/30/25 9:33am
Nissan Teana transmission fluid is generally changed every two years or approximately 60,000 kilometers. The Nissan Teana is equipped with an XTRONIC-CVT continuously variable transmission, and the replacement cycle for transmission fluid varies among different models. Replacement cycles for different transmissions: Manual transmission fluid is generally recommended to be changed every three years or approximately 100,000 kilometers; automatic transmission fluid is generally recommended to be changed every two years or approximately 40,000 kilometers; continuously variable transmission fluid is generally recommended to be changed every two years or approximately 60,000 kilometers. Methods for changing transmission fluid: Method one: Loosen the drain plug at the bottom of the transmission to drain the fluid, then refill; Method two: Remove the transmission oil pan directly to drain and refill the fluid. This method is more thorough than the first one, as it removes impurities from the bottom of the oil pan; Method three: Use a circulation machine to change automatic transmission fluid. Dynamic fluid exchange with an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission.
Was this review help?
4
0
Share
More Forum Discussions

Does the new Jetta VS5 have an anti-theft alarm system?

New Jetta VS5 has an anti-theft alarm system. Car anti-theft alarm: The car anti-theft alarm is a multifunctional product, which not only has the function of anti-theft alarm, but also can remotely open the trunk, remotely open/close the door, remotely open/close the window, remotely start the engine, and remotely lock the engine. Functions of the car alarm: Trigger state recognition function, anti-robbery function; automatic central door lock; door not closed warning; car search/rescue, secondary anti-theft; LED prompt, precision electronic detector; remote opening of the trunk; intrusion warning, power-off memory; automatic anti-theft/non-automatic anti-theft selection, door open flash/door open no flash selection; engine lock, external emergency release.
5
3
Share

Where is the exterior mirror heating button on the Geely Emgrand?

There are two types of control switches for the Emgrand's mirror heating: one is integrated with the electric mirror adjustment combination switch, and the other is located on the air conditioning control panel. Working principle of mirror heating: The principle of mirror heating is quite simple. It involves embedding a heating film behind the mirror lens, which utilizes the principle of resistance heating. The temperature can reach 35-60 degrees Celsius, making it particularly effective in winter or foggy conditions, while its effect is less noticeable at normal temperatures. Generally, mirror heating does not turn off automatically, so remember to turn it off after use to avoid draining the battery. Although the power consumption of mirror heating is not significant, it is not recommended to leave it on for extended periods to prevent damage to the heating element. Automatic mirror heating shut-off function: Some models may be equipped with an automatic shut-off function for mirror heating. This is typically set to a specific time (e.g., turning off after 15 minutes of heating) or to shut off once a certain temperature is reached (to maintain a temperature range). Such a design is more user-friendly, preventing the waste of battery power if the owner forgets to turn off the heating function.
7
2
Share

What does Mercedes-Benz C200 4MATIC mean?

Mercedes-Benz 4MATIC four-wheel drive's core technology is the 4ETS differential limiting technology. Function Introduction: Mercedes-Benz 4MATIC four-wheel drive's core technology is the 4ETS differential limiting technology. 4ETS utilizes the ABS's automatic brake force distribution function to achieve differential limiting. When a wheel of this all-wheel-drive vehicle slips, the onboard computer uses the ABS to brake the slipping wheel, thereby limiting its idle rotation. Performance Characteristics: The 4MATIC all-wheel-drive system is designed to be compact and lightweight, while also offering optimized performance in terms of friction. Compared to other all-wheel-drive systems, its advantages are quite evident: it excels in weight, fuel economy, comfort, and safety in passive conditions.
5
1
Share

What is the wiper size of the Audi Q2L?

The main wiper size of the new Audi Q2L is 24 inches, and the secondary wiper size is 21 inches. Different wiper sizes: The wiper sizes for the driver's side and the passenger's side are different. Generally, the driver's side is longer, and the passenger's side is shorter. In this case, be careful not to install them backward. If both wipers are the same size, it doesn't matter. Wiper installation: Wipers are installed below the windshield. For hatchbacks, the rear door and the rear windshield are integrated, so placing the wiper on the rear door prevents interference between them. For sedans, the rear door and the rear windshield are not integrated, and opening the rear door can cause misalignment between the rear windshield and the wiper.
16
2
Share

What are the functions of the MG HS buttons?

All button functions include parking radar/image, internal/external circulation, temperature zone synchronization, etc. ADAPTIVE button: The vehicle can monitor the driver's all vehicle operations in real time, automatically match the driver's driving intention, and actively adjust the vehicle's driving status and driving mode. Applicable scenario: Suitable for complex road conditions during the journey. BATTERY-CONTROL button: The vehicle mainly relies on the engine to provide power, and the engine actively charges the battery to maintain the battery level not lower than the target value. In addition, the battery level target value can be adjusted between 30%-100%. Applicable scenario: When the vehicle speed is high and driving at a constant speed, the engine is used to charge the battery.
17
4
Share

How many cylinders does the Prado 3.5 have?

The 3.5-liter engine is a six-cylinder, while the 5.0-liter and above are eight-cylinder engines. Number of engine cylinders: Common cylinder counts for car engines include 3, 4, 5, 6, 8, 10, and 12 cylinders. With the same cylinder diameter, more cylinders mean larger displacement and higher power output. For the same displacement, more cylinders allow for smaller cylinder diameters, enabling higher engine speeds and thus greater power. Displacement and cylinder count correspondence: Engines with 1.0-1.5 liters displacement typically use 3 cylinders, 2.0-liter engines are usually 4 cylinders, 2.5-liter engines are 5 cylinders, around 3-liter engines are generally 6 cylinders, around 4 liters are 8 cylinders, 5.2-liter engines are 10 cylinders, and engines above 5.5 liters use 12 cylinders.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.