How often should the transmission fluid of Chery Tiggo 5 be changed?

What are the size specifications of a flatbed transport vehicle?

Freight flatbed truck standard dimensions are as follows: 1. Width: Generally speaking, vehicles of the same tonnage may not have identical cargo compartment dimensions, but large trucks are typically 2.3-2.4 meters wide, with a minimum width of 2.3 meters. 2. Length and height: Usually range from 8 meters to 10 meters, or even up to 12.5 meters. For non-containerized vehicles, the top of the cargo is generally 4.2 meters above ground, with a maximum height of 4.5 meters. Additional information: Flatbed trucks are a common type of road transport vehicle, favored by transport companies because they facilitate the loading and unloading of large, heavy goods and can carry more cargo than other vehicle types of the same specifications. In the transport vehicle category, flatbed trucks are generally divided into two types: flat and high-low deck. Flatbeds are usually 4 to 13 meters long, while vehicles longer than 13 meters are mostly high-low deck types.

13

5

Share

What is the purpose of wheel balancing for cars?

Wheel balancing primarily serves the following purposes: enhancing driving comfort, reducing fuel consumption, extending tire lifespan, ensuring straight-line stability of the vehicle, minimizing wear on chassis suspension components, and improving driving safety. Wheel balancing refers to the equilibrium between the wheels when the vehicle is in motion. Typically, wheel balancing involves the installation of balancing weights. A car's wheel is an assembly consisting of a tire and a rim. However, due to manufacturing imperfections, the mass distribution across this assembly cannot be perfectly uniform. When the car's wheels rotate at high speeds, this can lead to dynamic imbalance, causing symptoms such as wheel wobbling and steering wheel vibration during driving. To prevent or eliminate this phenomenon, it is necessary to correct the balance of the wheel's edges by adding counterweights while the wheel is in motion. This correction process is known as dynamic balancing, commonly referred to as installing balancing weights. The balancing weights are made of lead alloy and are measured in grams, such as 5g, 10g, 15g, etc. Although they are relatively lightweight, they generate significant centrifugal force when the wheel rotates at high speeds. Each balancing weight features a steel hook that can be clipped onto the edge of the wheel rim during installation.

2

5

Share

Why Can't the Brake Be Depressed and the Car Won't Start?

Here are the reasons why the brake can't be depressed and the car won't start: 1. Vacuum booster pump leakage: If the car's vacuum booster pump leaks or malfunctions, the force required to depress the brake pedal increases. If it fails, the brake loses its power assistance, making it very hard to depress. 2. Normal phenomenon: The inability to depress the brake after the engine is turned off is related to the brake booster pump. The brake booster pump continuously generates vacuum only when the engine is running. When the engine is off, it relies on the residual vacuum assistance, which will be restored after starting, and this is not a fault. Extension: In car driving, to prevent unexpected situations like sudden movement or rolling when starting the vehicle, automatic transmission models are designed to require the brake to be depressed for ignition. If the brake is not depressed, the car cannot successfully start. Additionally, the gear must be in P (Park) or N (Neutral) when starting an automatic transmission car. Starting in N without the handbrake engaged can cause the car to roll, so the 'depress brake to start' design is entirely for safety considerations.

8

4

Share

What is the real fuel consumption of the 2020 Haval H6?

2020 Haval H6's real fuel consumption is around 8.8L/100km. Below is relevant information about the Haval H6: 1. The Haval H6 is a domestic SUV model under the Great Wall Motors Group, positioned as an urban SUV, consistently maintaining its title as the best-selling and most popular SUV. It offers both two-wheel drive and four-wheel drive options. In terms of exterior design, it does not follow the traditional off-road style but adopts a more fashionable and widely accepted new design style, exuding a sense of sophistication and stability. 2. The Haval H6 features an advanced intelligent voice interaction system, allowing voice control for navigation, air conditioning, music, windows, and other functions. It is also equipped with a powerful engine delivering a maximum power of 124KW and a torque of 285Nm, paired with a 7DCT wet dual-clutch transmission for low fuel consumption. Additionally, it incorporates a leading 3DP safety concept design to minimize driving risks for the driver.

17

5

Share

What lights to use when passing through an arched bridge crosswalk?

According to the Road Traffic Safety Implementation Regulations, when motor vehicles pass through sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic lights at night, they should alternately flash their high and low beams twice as a signal. When approaching sections with limited visibility such as sharp curves or the top of slopes, or when overtaking or encountering emergencies, vehicles should slow down and sound the horn as a warning. The correct procedures for safely passing through a crosswalk are as follows: 1. Traffic signals: Pay attention to traffic signals and markings, and reduce speed in advance when approaching a crosswalk. 2. Yielding: When the crosswalk signal turns green, vehicles must stop outside the stop line and wait, giving priority to pedestrians and non-motorized vehicles within the crosswalk. 3. Waiting: Observe the movement of pedestrians in the crosswalk and wait patiently for them to pass safely. Do not honk at elderly, blind, or physically weak pedestrians who move slowly, and never attempt to bypass them recklessly to avoid accidents. 4. Observation: When there are no pedestrians in the crosswalk, check both ends for any pedestrians or non-motorized vehicles that might suddenly rush through.

3

5

Share

What brand is db tire?

db tire is a tire model under the YOKOHAMA brand. YOKOHAMA tires were originally called Yokohama tires. Established in 1917, Yokohama Rubber started with rubber polymer chemistry and has extensively absorbed technical experience. It continues to advance development not only in the rubber field but also in metals, lightweight composite materials, and other areas. In addition to developing automotive-related fields led by tires, it is further expanding into industrial products, aviation parts, and sports goods. Design technology to reduce air resistance during driving: YOKOHAMA has developed tire design technology that reduces air resistance during vehicle movement. This technology, as an eco-friendly method to decrease tire rolling resistance, improves the airflow around the tire during driving, thereby achieving fuel-saving environmental effects. When a vehicle moves, irregular airflow forms around the tire. Some of this air flows to the sides of the vehicle, increasing driving resistance. To address this phenomenon, Yokohama Rubber developed a technology in 2010 to inspect the airflow around the tire under simulated driving conditions (normal rolling of the tire during driving) and applied this technology to entire vehicles. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing capacity, traction performance, and cushioning performance, as well as high wear resistance and flex resistance, along with low rolling resistance and heat generation. Directly in contact with the road surface, tires work with the vehicle's suspension to mitigate shocks during driving, ensuring good ride comfort and smoothness. They also ensure excellent adhesion between the wheels and the road, improving the vehicle's traction, braking, and off-road capability, while bearing the vehicle's weight. Tire maintenance methods: Increase awareness of tire safety and inspect tires regularly. Periodically correct wheel balance, as unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Regularly rotate tires to ensure even wear. For uniform wear on the same vehicle, tires should be rotated every 5,000 kilometers. In daily use, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread is worn flat, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks can be potential hazards for blowouts during high-speed driving. Additionally, immediately remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, do not turn the steering wheel, as this accelerates tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent and hard braking to prevent accelerated tread wear due to dragging between the tires and the ground.

14

5

Share

How often should the transmission fluid of Chery Tiggo 5 be changed?

What are the size specifications of a flatbed transport vehicle?

What is the purpose of wheel balancing for cars?

Why Can't the Brake Be Depressed and the Car Won't Start?

What is the real fuel consumption of the 2020 Haval H6?

What lights to use when passing through an arched bridge crosswalk?

What brand is db tire?

Should I choose 0w20 or 5w20 for Corolla?

Can Manual Transmission Use Automatic Transmission Fluid?

What are the differences between Goodyear's first and second generation?

What Causes the Friction Noise When the Car is Cold but Disappears When Warm?