How often should the transmission fluid of an Audi be changed?

1 Answers
DeLandon
07/24/25 8:23pm
Generally, for traditional automatic transmissions, the fluid should be replaced approximately every 2 years or 60,000 kilometers. Below are the hazards of not changing the transmission fluid for an extended period: Quality aspect: Prolonged failure to change the transmission fluid can lead to abnormal wear and severe deterioration of the fluid. Lifespan aspect: Not changing the transmission fluid for a long time can cause the fluid to age and degrade, which not only increases fuel consumption but also shortens the transmission's service life. Safety aspect: Extended periods without changing the transmission fluid can cause the fluid to form particles, clogging the oil passages and damaging the valve body, directly affecting the system's oil pressure and power transmission, resulting in delayed responses and harsh shifting.
Was this review help?
20
3
Share
More Forum Discussions

How to Deal with Brake Locking Due to Water Ingress?

Force start the engine and press the accelerator hard. Once the rear wheels move, the issue should be resolved. Remove the tire and gently tap the brake drum with a hammer or similar tool a couple of times to loosen the contact surface between the brake drum and the brake pads. After washing the car or driving in the rain when the brake drum gets wet, avoid parking immediately. Drive for a while and apply the brakes several times to allow the moisture inside to evaporate.
16
2
Share

What is the suspension system of the Volkswagen Tayron?

The suspension system of the Volkswagen Tayron varies by position: the front suspension is a MacPherson independent suspension, while the rear suspension is a multi-link independent suspension. As a compact SUV, its body dimensions are: length 4589mm, width 1860mm, height 1660mm, with a wheelbase of 2731mm. It has a fuel tank capacity of 60 liters and a trunk capacity of 250 liters. The Volkswagen Tayron is equipped with a 1.4T direct-injection 4-cylinder turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 250Nm. It is paired with a 7-speed dual-clutch transmission.
19
5
Share

How much horsepower does the Magotan 2.0T have?

Magotan 2.0T has a horsepower of 200PS. The Magotan 2.0TSIDSG is a sedan developed by Magotan Company. It is equipped with a 2.0TL4 engine, featuring turbocharged intake, a 6-speed dual-clutch transmission, a maximum horsepower of 200PS, a maximum power of 147kW, a maximum power speed range of 5100-6000rpm, and a maximum torque of 280N·m. Here is some relevant information: Magotan: The Volkswagen Magotan is closely related to the Passat B6, known as the FutureB6, and it is the first B-class sedan to be produced and sold by FAW-Volkswagen since its establishment. According to FAW-Volkswagen, 'Magotan' symbolizes confidence, decisiveness, and dynamism, while 'Teng' represents soaring, surpassing, and passion. Exterior Design: The exterior design of the Magotan was meticulously crafted by German experts, incorporating the latest fashion elements in car design. Its dynamic and grand styling represents the newest European car design philosophy. The sturdy V-shaped front grille exudes a sense of stability and grandeur, while the sleek and stylish body lines give the Magotan an impressive drag coefficient as low as 0.28.
10
4
Share

What is the fuel tank capacity of the Mondeo Zhisheng?

The fuel tank capacity of the Mondeo Zhisheng is 70 liters, which is the officially announced data. The fuel grade for the Mondeo Zhisheng is 92, with a fuel consumption of 10.1L per 100 kilometers. A full tank can cover a distance of 693km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank at all times. Generally, the fuel level is observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge on the dashboard usually has 5 to 6 segments. When the fuel gauge shows only 2 segments remaining, it is advisable to refuel to avoid running out of fuel midway. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity marked by the car manufacturer is measured from the bottom of the tank to the safe limit, and there is still some space from the safe limit to the tank opening. This space is reserved to allow the fuel in the tank to expand when the temperature rises, preventing overflow from the tank's safety space. If fuel is added up to the tank opening during refueling, the actual amount of fuel added may exceed the calibrated fuel tank capacity.
9
1
Share

How to Calculate the Date of Car Seat Belts?

Seat belts come with labels that display detailed dates, so there is no need for calculation. Many car components have detailed production dates, such as seat belts, headlights, radiators, radiator frames, tires, glass, generators, compressors, etc. The production dates of all car components should be earlier than the production date of the entire vehicle; otherwise, they are considered replacements. Below are the maintenance methods and usage precautions for car seat belts: 1. Regularly inspect the condition of seat belts. If any damage is found, replace them promptly. Additionally, all bolts securing the seat belts on the floor near the seats should be tightened, and sealant should be applied around the bolts. 2. The correct way to wear a three-point seat belt is to fasten the lap belt as low as possible, around the hips, not the abdomen. The shoulder belt should not be placed under the arm but should naturally cross the chest diagonally. Also, avoid twisting the belt while using it. 3. After fastening the seat belt correctly, perform a sudden forward movement to confirm its functionality. A sudden forceful pull by hand can also serve as a test. 4. Avoid placing the seat belt over hard or fragile objects, such as keys or glasses in clothing, to prevent accidental injuries when tightening. Additionally, ties should be placed outside the seat belt, not underneath it. 5. Ensure that the seat backrest is not overly tilted, as this may prevent the seat belt from extending and retracting properly.
17
1
Share

What to Do When the Brake Discs Are Rusted and the Car Won't Move?

If there is only slight rust on the surface, you can use the method of continuous braking to remove it while driving. If there are multiple areas of rust, it is best to drive the car into a repair shop, remove the brake discs, and use sandpaper to clean off the rust.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.