How often should the transmission fluid of a Lexus ES be changed?

1 Answers
Monica
07/29/25 1:35pm
Lexus ES transmission fluid should be changed every 2 years or after driving 60,000 kilometers. Transmission fluid is an oil product that keeps the gear system clean, lubricates and extends the life of the transmission device, and provides effective lubrication even in low-temperature conditions. The Lexus ES is a model under the Lexus brand, with body dimensions of 4900mm in length, 1820mm in width, and 1450mm in height, and a wheelbase of 2820mm. In terms of exterior design, the sharp and dynamic spindle grille of the Lexus ES, combined with the striking L-shaped LED daytime running lights, outlines a bold yet sporty front layout. When the view shifts to the side of the car, the clean and smooth waistline extends from the front to the rear, interpreting a more agile and luxurious style.
Was this review help?
6
3
Share
More Forum Discussions

How to resolve the Audi P006800 fault?

Audi P006800 fault elimination method is as follows: 1. Remove the throttle hose. 2. Open the throttle flap. 3. Clean with a brush. 4. Spray with cleaning agent. 5. Reinstall the hose. More information about the P006800 fault: 1. P006800 refers to the absolute pressure of the manifold. 2. The function of P006800 is to measure the pressure in the intake manifold. The powertrain control module uses the difference between the intake manifold pressure and atmospheric pressure as the basis for determining the basic fuel injection quantity of the injector, helping the engine achieve the optimal air-fuel ratio under different loads.
20
4
Share

What brand is the DS9 car?

DS9 is a Citroën brand car. More information about the Citroën DS9 is as follows: 1. The Citroën DS9 is a high-end luxury sedan launched by the French PSA Group, originating from its concept car METROPOLIS. It is the first model "designed specifically for China" by the PSA China Design Center, incorporating Chinese elements such as kites and ancient zithers in the front face and other areas. 2. The Citroën DS9 measures 5300mm in length, 2000mm in width, and 1400mm in height. It will share a platform with the Citroën C6 and Peugeot 407. After mass production, it will be named DS9 and become the flagship model of the Citroën DS series. 3. The Citroën DS9 is equipped with multiple powertrain systems.
14
2
Share

How to distinguish between Nissan CVT7 and CVT8?

Nissan CVT7 and CVT8 can be distinguished by the following methods: 1. Maximum torque transmission: CVT7 is 180N.m; CVT8 is 250N.m. 2. Gear ratio: CVT7 is 7.3; CVT8 is 7.0. 3. Pulley ratio range: CVT7 is 2.200-0.550; CVT8 is 2.640-0.380. 4. Length: CVT7 is 3233mm; CVT8 is 3450mm. 5. Movable pulley shaft distance: CVT7 is 147mm; CVT8 is 173mm.
20
2
Share

How to Control Speed in First Gear When Going Downhill?

Methods for controlling speed: 1. When driving on a long downhill section, steer gently and avoid sharp turns to prevent rollovers caused by high inertia, excessive speed, or improper steering. 2. Reduce speed before entering a long downhill slope, allowing the vehicle to proceed at a slow pace. 3. Shift into an appropriate gear before descending; generally, second or third gear should be selected. It is strictly prohibited to shift gears after entering the downhill section. 4. Test the braking performance before descending. If any faults are detected, resolve them before proceeding. During the descent, apply brakes intermittently to effectively control the vehicle's speed. Avoid using emergency braking whenever possible. If emergency braking is necessary, ensure the vehicle is moving straight before applying the brakes. 5. When going downhill, coasting in neutral is strictly prohibited. Always engage an appropriate gear to utilize the engine's braking effect and reduce the vehicle's coasting speed.
20
4
Share

How to Remove and Install a Car Timing Belt?

Method for removing and installing a car timing belt: 1. Remove the fan pulley at the front end of the crankshaft. 2. Remove the timing gear cover of the engine. 3. After carefully observing the timing marks on the timing wheel, remove the locking plate, then the nut, and install the tensioner on the timing wheel. 4. For chain-driven structures, after observing the timing marks, remove the sprocket fixing screws and washers on the camshaft. 5. Allow the camshaft sprocket to rotate freely on the camshaft, then remove the chain, camshaft sprocket, and crankshaft sprocket together. 6. During assembly, follow the reverse order of the above steps, but ensure the timing gear on the crankshaft is properly aligned before inserting the key. 7. When removing only the timing gear from the crankshaft without removing the crankshaft itself, support the valve spring in advance to prevent its pressure from acting on the camshaft. 8. When removing the camshaft and its attached timing gear together, also remove the thrust plate located at the front of the camshaft.
16
2
Share

Should You Shift Gear Before or After Pressing the Clutch?

Press the clutch before shifting gear. The correct procedure is to start the car, then press the clutch, shift into first gear, and release the clutch to begin moving. Below are some relevant materials about car operation: For manual transmission cars, pay attention to the following points: 1. Become proficient in pressing the clutch pedal through practice, ensuring stability. Develop good habits by pressing it all the way down and releasing it slowly. 2. Coordinate the throttle and clutch. When starting, shift into first gear first, then slowly release the clutch while adding throttle at the semi-clutch state. Only release the clutch completely once the car starts moving. 3. Master the timing of gear shifting. Shift gears when the engine speed is around 2000 RPM, first reducing the throttle and then pressing the clutch. 4. Change gears frequently during driving, selecting the appropriate gear based on speed and road conditions. Infrequent gear changes can easily lead to lugging or engine over-revving, increasing car wear and fuel consumption. Therefore, it's essential to develop the habit of frequent gear shifting. 5. Ensure smooth gear shifting actions. Press the clutch all the way down and shift gears in one motion. Familiarize yourself with the gear positions and practice to improve your feel for it.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.