How often should the transmission fluid in the Ford Kuga be changed?

1 Answers
LeSteven
07/29/25 3:29pm
The transmission fluid in the Ford Kuga should be changed every two years or 40,000 kilometers. Transmission fluid is an oil product that maintains the cleanliness of the gear system, providing lubrication to extend the lifespan of the transmission components. It also delivers highly effective lubrication at low temperatures and reduces fluid loss under harsh operating conditions. The Kuga uses the 6F35 transmission model, which was jointly developed by Ford and General Motors and offers high reliability. The Ford Kuga is a compact SUV introduced by Ford, with body dimensions of 4524mm in length, 1838mm in width, 1701mm in height, and a wheelbase of 2690mm. In terms of exterior design, the Kuga features bold, muscular lines that give it a distinct American muscle car feel, with a front grille that adopts Ford's signature hexagonal design.
Was this review help?
4
4
Share
More Forum Discussions

How to Clean the Sunroof Drain Pipe of the Envision?

To clean the sunroof drain holes, you can directly use a high-pressure air gun to blow them out, which effectively removes dirt from the sunroof drain holes. Cars equipped with sunroofs have drain holes. If there are no drain holes or if they are blocked, the sunroof may leak during rain. There are several types of car sunroofs: 1. Built-in Sunroof: A built-in sunroof refers to a sunroof where the sliding assembly is located between the interior and the roof. Its advantages include a large opening and a sleek, aesthetically pleasing appearance. Most sedans use built-in sunroofs. 2. Pop-up Sunroof: Pop-up sunroofs are compact and have a simple structure. Installed on the roof, they effectively promote air circulation inside the car, allowing fresh air to enter and providing a healthy and comfortable experience for the owner. Additionally, car sunroofs can broaden the field of vision and are often used for mobile photography and videography needs. 3. Panoramic Sunroof: Panoramic sunroofs offer the advantages of an expansive view and excellent ventilation. However, they also have some drawbacks, such as higher costs, the need to clean accumulated dust to avoid obstructing the view, and a reduction in the overall rigidity of the car body, which lowers the safety coefficient.
15
2
Share

What causes the fuel gauge to show less than full when the tank is actually full?

Reasons why the fuel gauge shows less than full when the tank is actually full: 1. There may be an issue with the fuel level sensor, usually caused by poor contact. Check whether the fuel float can send normal signals. Remove it and move the float to the highest position to see if the fuel gauge indicates full. Determine whether the fault lies with the gauge or the float and replace accordingly. 2. The fuel gauge may be inaccurate. Check if the instrument circuit has been modified. Visit a 4S shop to verify whether the gauge pointer can reach the maximum line and if the indication is accurate. 3. The fuel gauge pointer may be stuck, in which case the entire instrument must be replaced. Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through fractionation, cracking, or pyrolysis, and it is used as fuel.
10
4
Share

What Causes Water in the Engine Cylinder?

Reasons for water entering the engine cylinder: Water entering through the air filter: If the engine only has a mixture of water vapor entering through the air filter, the issue is minor and can be resolved with simple treatment. Small amounts of water in the oil or fuel: There may be small amounts of water in the oil or fuel, requiring an oil change and cleaning of related engine components. Minimal water in the engine: If there is more water but not a significant mixture, and the car hasn't been started, the engine won't be damaged. In this case, the water needs to be drained, the interior cleaned thoroughly, reassembled, and the oil replaced. Significant water in the engine: If there is a significant amount of water in the engine and it cannot run after starting, the only options are to replace the engine or scrap the car entirely.
18
5
Share

Is the Daytime Running Light Displayed on the Dashboard?

Daytime running lights do not have an icon on the dashboard, and no indicator light will illuminate on the dashboard when they are turned on. Function of daytime running lights: They serve as a signal while driving, without providing illumination, making the vehicle more easily recognizable during daytime driving. When the car engine starts, the daytime running lights automatically turn on and gradually increase in brightness to attract the attention of other motor vehicles, non-motor vehicles, and pedestrians on the road. Definition of daytime running lights: There are generally two, with the outer one being the light switch. Daytime running lights, also known as DRLs, are installed on the front sides of the vehicle to signal its presence during the day. When the car engine starts, the daytime running lights automatically turn on and gradually increase in brightness to attract the attention of other motor vehicles, non-motor vehicles, and pedestrians on the road.
4
2
Share

What maintenance items are required for a car with over 50,000 kilometers?

Maintenance items required for a car with 50,000 kilometers: 1. Spark plugs: The replacement cycle depends on the material, generally ranging from 2 to 4 years; 2. Air filter: If it hasn't been replaced for a while, it should be replaced now; 3. Belts and chains: If the vehicle's engine uses a timing belt, it should be inspected or replaced at 50,000 kilometers. If the engine uses a timing chain, inspection is sufficient without replacement; 4. Engine oil and oil filter: Under high temperature and high pressure conditions in the engine, the shelf life of engine oil is significantly reduced, and its performance declines sharply. Over time, it fails to protect the engine effectively.
12
2
Share

Can the Kawasaki Z900 carry a passenger?

Kawasaki Z900 cannot carry a passenger. Motorcycle working principle: When the pedal is depressed, the mechanism pressurizes the spring, causing the outer edge of the spring to lift and separate the pressure plate from the friction plate. At this point, the friction plate and flywheel are no longer connected, so even if the engine continues to run, power will not be transmitted to the gearbox and wheels. This allows the rider to shift gears or come to a complete stop without stalling the engine. Power transmission: When the crankshaft speed is low, the two friction plates cannot contact the housing, preventing power transmission. At high crankshaft speeds, centrifugal force causes the friction plates to move outward and engage with the housing, enabling power transmission.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.