How often should the transmission fluid in an automatic transmission car be changed?

Does Mixing Gasoline Have Any Impact?

Mixing gasoline types will not cause significant issues in the short term. However, prolonged use may lead to engine knocking, especially noticeable during idling. Below is relevant information about mixing gasoline: 1. Different Octane Ratings: Mixing two types of gasoline may cause certain damage to the engine. Since 92 and 95 octane gasoline have different octane ratings, mixing them can affect the operation of fuel injectors and carburetors. Firstly, fuel injectors may become clogged due to the mixture, potentially preventing complete atomization of the mixed gasoline. This incomplete combustion in the engine increases carbon deposits, ultimately reducing engine performance and possibly leading to premature engine failure. 2. Different Cleanliness Levels: The cleanliness of gasoline is not determined by its octane rating but by national standards, such as China IV or China V seen at gas stations. The main difference lies in sulfur content—for example, China V gasoline can have five times less sulfur than China IV. Sulfur content directly affects the cleanliness of gasoline and its combustion byproducts.

13

1

Share

What is the Vehicle Inspection Policy?

According to different vehicle types and usage purposes, the vehicle inspection policies vary. Below are the detailed explanations: Annual inspection requirements for non-commercial passenger vehicles: For vehicles within 6 years, inspection is required every 2 years, but exempt from on-site testing. For vehicles aged 6-10 years, on-site testing is required every 2 years. For vehicles aged 10-15 years, annual inspection is required once a year. For vehicles over 15 years old, inspection is required every 6 months. The passenger vehicles mentioned here are limited to non-commercial small and micro passenger vehicles with 9 seats or fewer, excluding minivans. Annual inspection requirements for commercial vehicles: For the first 5 years, on-site testing is required once a year. For vehicles over 5 years old, on-site testing is required every 6 months.

19

0

Share

Why do people prefer C-HR over IZOA?

The reasons for choosing C-HR over IZOA are as follows: 1. C-HR has home advantage: C-HR is produced by GAC Toyota, while IZOA is produced by FAW Toyota. Among Toyota buyers, people from southern regions, especially Guangdong, are the majority. As a company located in Guangdong, GAC Toyota's C-HR has a slight home advantage over IZOA, which may lead to a sales gap. 2. C-HR better meets user needs: The differences between Toyota C-HR and IZOA are mainly reflected in their configurations. IZOA's configuration feature is that the differences between various models are small, meaning that buying mid-to-low-end models is more cost-effective. On the other hand, C-HR has a significant gap between low-end and high-end models, with the high-end models being the preferred choice.

13

3

Share

How to Reset the One-Touch Window Lift Function on a BMW Remote?

BMW Remote One-Touch Window Lift Reset Method: 1. Press and hold the one-touch window lift button until the window reaches the top, then release; 2. Continue holding the window lift button for a few seconds to complete the reset. BMW is a German luxury car brand. Taking the BMW X1 as an example, its body dimensions are: length 4565mm, width 1821mm, height 1620mm, with a wheelbase of 2780mm and a fuel tank capacity of 61 liters. The BMW X1 is equipped with a 1.5L turbocharged engine, delivering a maximum torque of 220Nm and a maximum power of 103kW, with the maximum power speed ranging from 4600 to 6500 rpm.

9

3

Share

What does the 'W' in motor oil grades mean?

The 'W' in motor oil grades stands for winter, which is the abbreviation of 'winter', indicating that this oil can be used normally in winter. Motor oil grades include 5W30, 5W40, 0W30, and 0W40. The number before the 'W' represents the oil's low-temperature flow performance. 5W means the oil can flow normally at -30 degrees Celsius, while 0W means it can flow normally at -35 degrees Celsius. The number after the 'W' indicates the oil's high-temperature viscosity, with higher numbers representing higher viscosity. Motor oil, also known as engine lubricant, serves to lubricate and reduce friction, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption for the engine.

1

2

Share

How Long Does It Take to Transfer a Motorcycle Ownership?

Motorcycle ownership transfer, similar to car ownership transfer, falls under the category of motor vehicle ownership transfer and must be processed at the local vehicle management office. Generally, with all required materials ready, it can be completed within one working day. Materials required for the transfer process include: 1. Proof of identity of the current motor vehicle owner; 2. Proof and documentation of motor vehicle ownership transfer; 3. Motor vehicle registration certificate; 4. Motor vehicle driving license; 5. For motor vehicles under customs supervision, an additional "Release of Supervision Certificate for Vehicles under Customs Supervision of the People's Republic of China" or a customs-approved transfer certificate must be submitted; 6. For motor vehicles that have exceeded the inspection validity period, additional motor vehicle safety technical inspection qualification certificates and compulsory traffic accident liability insurance certificates must be submitted.

4

3

Share

How often should the transmission fluid in an automatic transmission car be changed?

Does Mixing Gasoline Have Any Impact?

What is the Vehicle Inspection Policy?

Why do people prefer C-HR over IZOA?

How to Reset the One-Touch Window Lift Function on a BMW Remote?

What does the 'W' in motor oil grades mean?

How Long Does It Take to Transfer a Motorcycle Ownership?

What are the differences between the G50 and the Buick GL6?

How to Charge a Pure Electric Vehicle on Long-Distance Trips?

Can the Trumpchi GS8 Hybrid Version Get a Green License Plate?

What is the method to manually reset the maintenance light on an Audi Q3?