How Often Should the Transmission Fluid in a Magotan Be Replaced?

1 Answers
LukeDella
07/29/25 12:57pm
The transmission fluid in a Magotan should be replaced every 2 years or every 40,000 kilometers driven. The Magotan is a mid-size car launched by FAW-Volkswagen, with an exterior body length of 4866mm, width of 1832mm, height of 1464mm, and a wheelbase of 2871mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm, with a front-wheel-drive configuration. The Magotan has a fuel tank capacity of 66 liters and a trunk capacity of 533 liters. The front and rear tire specifications are 215/60R16, with a front suspension using MacPherson independent suspension and a rear suspension using a multi-link independent suspension.
Was this review help?
16
2
Share
More Forum Discussions

Can the Wuling Mini Truck Enter the City?

Whether the Wuling Mini Truck can enter the city depends on the specific regulations of each city. Here is some related information about Wuling: 1. Engine: The Wuling Mini Truck is equipped with a 1.8L engine, with a maximum power of 133 horsepower and a peak torque of 182 Nm. The drive form remains mid-engine, rear-wheel drive. 2. Suspension: The suspension system uses a front MacPherson strut and a rear solid axle with 6-piece variable cross-section leaf springs as the elastic elements. The mini truck features a design with 7 reinforced crossbeams in the load-bearing area, and the proportion of high-strength steel used in the whole vehicle is 85%. It adopts a one-time stamping-formed frame, which is sturdy and robust. The frame thickness for the double-row seats is 140mm, while the single-row version also adopts a reinforced auxiliary crossbeam design, with a thickness reaching 210mm, greatly enhancing its load-bearing capacity.
20
4
Share

Can There Be Pauses During the Subject 2 Driving Test?

Subject 2 Driving Test allows pauses between different test items. Below is a detailed introduction about the Subject 2 Driving Test: 1. Overview: Subject 2, also known as the small road test, is part of the motor vehicle driver's license assessment and refers to the field driving skill test. For small vehicles (C1/C2), the test includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving through curves. 2. Others: If the first attempt at the Subject 2 test is unsuccessful, a retake is allowed. If the applicant does not take the retake or fails the retake, the test session ends, and the applicant must reschedule the test after ten days. Within the validity period of the driving skill test permit, the number of test rescheduling for Subject 2 and Subject 3 (road driving skill test) must not exceed five times.
2
4
Share

What is the fuel tank capacity of the GL8 in liters?

The fuel tank capacity of the GL8 is 70 liters, as officially announced. GL8 owners can also verify this information on their vehicle's specification sheet. The GL8 requires 95-octane gasoline, with a fuel consumption of 9.8L per 100 kilometers. A full tank allows for a driving range of approximately 714 kilometers. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel gauge accurately reflects the remaining fuel. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. During actual refueling, the amount of fuel added may exceed the nominal tank capacity. This is because the manufacturer's specified tank capacity is measured from the bottom of the tank to the safety limit. There is additional space from the safety limit to the tank opening, designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the nominal tank capacity.
7
4
Share

Is the line 'on' or is the 'O' 'on'?

Generally speaking, the horizontal line on a switch represents 'on', while the circle 'O' represents 'off'. Origin of the switch symbols: It is said that this convention dates back to World War II, evolving from the basic definitions of binary 1 and 0. The circle represents an open circuit, i.e., the 'off' state, while the vertical or horizontal line represents a closed circuit, i.e., the 'on' state. After decades of application and evolution, these symbols have now become internationally recognized power switch indicators widely used in production and daily life. Advantages of the switch line: The switch line usually has a glow-in-the-dark feature, making it easier to locate the switch in the dark at night. Typically, the horizontal line is positioned at the top of the switch panel, where pressing down turns it off, and pressing up turns it on.
5
0
Share

What is the function of a steam turbine turning gear?

The functions of a steam turbine turning gear are as follows: 1. Lubrication: It establishes an oil film lubrication on all bearings of the steam turbine to reduce dry or semi-dry friction between the journal and the bearing bush, protecting the journal from damage. 2. Heat dissipation: While ensuring uniform heating or cooling of the rotor, it enhances the stirring effect of the rotor on the steam inside the cylinder, reducing the temperature difference between the upper and lower cylinders and the resulting thermal deformation and thermal stress. However, the disadvantage of high-speed turning gear is the large starting torque. To reduce the torque, a jacking oil system is usually employed. 3. Impact reduction: During turbine startup, it can reduce the rotor's inertia and the impact force on the blades. During major overhauls, the turning gear can also be used for machining operations such as turning the exciter brush slip rings.
15
3
Share

How to reset the tire pressure warning light on Wuling Journey?

The steps to reset the tire pressure warning light on Wuling Journey are: Firmly press the brake pedal to prepare for activating the vehicle's power. Press the one-touch start button. The dashboard will light up, indicating full vehicle power is activated. Inflate all four tires to the standard pressure. Press and hold the tire pressure warning light reset button for 3 seconds. What to do when tire pressure is low: If no visible damage is found on the tires, simply inflate them to normal pressure and reset the tire pressure system. If inspection reveals a punctured tire, drive to a repair shop for patching before reinflating. If the low-pressure warning reappears after inflation without any punctures, it may indicate air leakage due to wheel rim deformation - check and replace the rim if necessary.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.