How often should the transmission fluid be changed in the Envision?

1 Answers
DiValeria
07/25/25 3:30pm
The transmission fluid in the Envision should be changed approximately every 80,000 kilometers. Transmission fluid plays a crucial role in cooling, lubricating, and transmitting power within the transmission system. Here is some information about transmission fluid: Automatic Transmission Fluid: This is a specialized fluid designed for automatic transmissions. Early automatic transmissions did not have dedicated fluids and instead used engine oil. Due to significant differences in operating conditions and technical requirements, the practice of using engine oil as automatic transmission fluid was quickly phased out. Manual Transmission Fluid: Commonly referred to as gear oil, it is categorized into five grades (GL-1 to GL-5) by the American Petroleum Institute based on quality levels. GL-1 to GL-3 have lower performance requirements and are used for lubricating spur and bevel gears under general load, as well as gears in transmissions and steering systems.
Was this review help?
17
5
Share
More Forum Discussions

Is the impact significant if the timing belt is off by half a tooth?

Being off by half a tooth on the timing belt has a significant impact. It can cause incorrect ignition timing, difficulty in starting the vehicle, and in severe cases, may even affect the valves. It is recommended to remove the belt, realign the timing, and then reinstall it. Here is an introduction to the timing belt: The timing belt is a crucial component of the engine's valve system. It connects to the crankshaft and operates at a specific transmission ratio to ensure accurate intake and exhaust timing. The use of a belt instead of gears for transmission is due to its lower noise, minimal self-variation, and ease of compensation. Clearly, the lifespan of a belt is shorter than that of metal gears, so regular replacement of the belt is necessary.
19
4
Share

How to Use the Cruise Control on the Buick LaCrosse?

How to use the cruise control on the Buick LaCrosse: 1. Activate the cruise control system by sliding the switch to the ON position to turn on the cruise control; 2. After setting, when reaching the desired speed, press the SET button to maintain the speed; 3. After setting the cruise speed, you can still accelerate using the accelerator pedal as usual. When releasing the accelerator pedal, the system will restore the speed to the set cruise speed. The Buick LaCrosse is a model under Shanghai GM Buick, with body dimensions of 5005mm in length, 1858mm in width, and 1500mm in height, and a wheelbase of 2837mm. In terms of appearance, the LaCrosse features a more grand and luxurious design, such as the large three-dimensional shield emblem on the front, the wide chrome front grille, and the distinctive cannon-shaped tail lights.
12
2
Share

Is Purchase Tax Required for a 150cc Motorcycle?

Currently, 150cc motorcycles are exempt from purchase tax. Relevant information about vehicle purchase tax is as follows: Time: As long as the motorcycle is registered after July 2019, those with an engine displacement of 150cc or below are exempt from purchase tax, whether they are new or used. Introduction: Vehicle purchase tax is a tax levied on units and individuals who purchase specified vehicles within the country, evolving from the vehicle purchase tax. Tax Payment Location: For taxable vehicles that require registration, the tax should be declared and paid to the competent national tax authority in the vehicle registration location; for taxable vehicles that do not require registration, the tax should be declared and paid to the competent national tax authority in the taxpayer's location.
17
5
Share

Can vehicle inspection be conducted in a different location?

Yes, cross-provincial vehicle inspection is allowed. Starting from September 1, 2018, the policy has been fully implemented for small cars, trucks, and medium-sized buses to undergo inspection in provinces other than where the vehicle is registered. This means applicants can directly inspect their vehicles and obtain the inspection qualification mark in another province without needing to go through the entrusted inspection procedure. The required documents for annual inspection are as follows: When undergoing the annual vehicle inspection, you need to bring the vehicle's driving license, vehicle insurance documents, and the entrusted annual inspection letter to the local vehicle management office where the inspection is entrusted. During the inspection process, it is important to ensure that the vehicle has no outstanding traffic violations, otherwise, the normal annual inspection cannot be conducted.
18
3
Share

What is a Commercial Vehicle?

Commercial transportation refers to highway transportation that provides services to society and involves various forms of cost settlements. Below is a detailed introduction to commercial vehicles: 1. Scope: Commercial vehicles refer to those approved by the competent authority at the end of the reporting period that can participate in commercial operations. This includes vehicles in good technical condition, those under repair, awaiting repair, long-term parked, and those proposed for scrapping but not yet approved by the higher authorities. However, it does not include non-commercial vehicles of the enterprise (such as wire stringing vehicles, tankers, trucks, and other special-purpose vehicles) or borrowed passenger vehicles. 2. Classification: Commercial vehicles include commercial passenger vehicles, commercial freight vehicles, hazardous goods transport vehicles, and vehicle trains.
4
4
Share

What is a Pure Electric Vehicle?

Pure Electric Vehicle refers to a passenger vehicle that uses on-board batteries as the power output, drives the wheels with electric motors, and meets all the requirements of road traffic, safety regulations, and national standards. Due to its environmental friendliness and relatively lower energy consumption compared to traditional fuel-powered vehicles, its prospects are widely optimistic, but it is not yet very popular and is in the development stage. The components of a pure electric vehicle include: the electric drive and control system, mechanical systems such as the drive force transmission, and working devices to complete set tasks. The electric drive and control system is the core of an electric vehicle and the biggest difference from internal combustion engine vehicles. The power source of a pure electric vehicle is entirely provided by the on-board battery. If the battery is depleted, the vehicle cannot run and needs to be charged using a charging station.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.