How often should the transmission fluid be changed in a Volkswagen Tiguan?

2 Answers
DiPaul
07/23/25 11:13pm
The transmission fluid replacement interval for the Volkswagen Tiguan is 55,000 kilometers. Below is an introduction to Volkswagen: 1. Introduction: Volkswagen AG is an automobile manufacturing company headquartered in Wolfsburg, Germany, founded by Ferdinand Porsche on March 28, 1937. 2. Brands: The company owns brands such as Audi and Volkswagen. In May 2021, the '2021 Forbes Global 2000' was released, with the Volkswagen Group ranking 17th. 3. Development: On March 28, 2018, Volkswagen officially released the official images of the Atlas Cross Sport concept car, which made its global debut at the 2018 New York Auto Show. The vehicle was also slated for mass production in the United States in the future.
Was this review help?
1
5
Share
DelConnor
08/10/25 7:10pm
I've been driving a Volkswagen Tiguan for several years and found that the transmission fluid change interval isn't fixed—it depends on the model and driving habits. Generally, for automatic transmissions like the Tiguan's DSG or Tiptronic, it's recommended to change the fluid every 60,000 to 80,000 kilometers, or have it inspected every two years. That's what the manual says, and it's best to follow it without delay. Since I often drive in city traffic with frequent stops and starts, which accelerates fluid degradation, I change mine every 60,000 kilometers to ensure smooth operation without shuddering. Neglecting this issue can lead to rough shifting or even transmission failure. A routine service costs a few hundred yuan, which is much more economical than a major repair costing tens of thousands. Regular maintenance also extends the vehicle's lifespan and reduces the risk of breakdowns on the road.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

What engine does the Zotye T500 use?

Zotye T500 is equipped with a 1.5T turbocharged engine, paired with both manual and automatic transmissions. The model number for the 1.5T automatic transmission engine is TNN4G15T. Below are the relevant details about the Zotye T500: Dimensions: The Zotye T500 is a compact SUV under the Zotye brand, with a length of 4632mm, width of 1850mm, height of 1695mm, and a wheelbase of 2700mm. Exterior: The vehicle features a hexagonal front grille, with a design resembling fretwork above the fog lights. The side profile adopts a floating roof design, while the rear end has a full-bodied shape with a rising waistline that extends to the rear. The horizontal taillight design echoes the combination of the front headlights, providing high visibility.
2
4
Share

What is the engine model of the Toyota C-HR?

M20C is the engine model used in the Toyota C-HR, with a maximum horsepower of 171 hp, a maximum power of 126 KW, a maximum power speed of 6600 rpm, and a peak torque of 203 N.m. The Toyota C-HR engine is entirely imported from Japan. The Toyota C-HR is equipped with a 2.0L naturally aspirated engine produced under the TNGA architecture, with the engine model M20A. For the daily maintenance of the Toyota C-HR engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD-SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB-CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine problems. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, it may burst the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. Small amounts remain suspended in the oil, while larger amounts precipitate, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates properly but also extends the overall lifespan of the radiator and engine.
14
2
Share

What Are the Reasons Why the Key of a Manual Transmission Car Cannot Be Pulled Out?

Here are the reasons why the key of a manual transmission car cannot be pulled out: The key cannot be turned after insertion: This is usually because after parking and turning off the engine, the steering wheel was accidentally turned left or right, or the wheels were not aligned properly when parking. The force applied causes the steering wheel to rotate, triggering the steering wheel's self-locking function. You can gently turn the key with your right hand while simultaneously moving the steering wheel left and right with your left hand, and the key will then turn. Ignition switch failure: This can cause the car key to not be pulled out. In this case, the ignition switch needs to be replaced. The key cannot be pulled out after turning off the engine: The reason for this is that the gear is in the P position and does not touch the electronic sensor, or there are objects such as coins in the gear slot blocking it from returning to position. The car owner should check if there are any obstructions in the gear slot, remove them, start the car, shift the gear again to ensure it is fully returned to position, and then the key can be pulled out.
9
1
Share

Why Doesn't the Manual Transmission Car Move When in Gear?

Here is an introduction to the reasons why a manual transmission car doesn't move when in gear: Possible causes: The car not moving when in gear may be due to an automatic transmission oil pan leak, with all hydraulic oil leaked; the linkage or cable between the control lever and the manual valve rocker arm is loose, keeping the manual valve in neutral or park position; the oil pump intake filter screen is clogged; severe leakage in the main oil circuit; or the oil pump is damaged, etc. Functional comprehensive faults: These involve the clutch, transmission, and drive axle. When diagnosing, the fault location should be determined first, starting with checking the condition of both wheels. The diagnostic sequence generally goes from the drive wheels forward through the rear axle to the drive shaft, then to the transmission, and finally to the clutch. If the drive shaft rotates but the car does not move forward, the fault lies in the rear axle. If lifting the rear axle and rotating one rear wheel causes the other rear wheel to rotate in the opposite direction but the drive shaft does not follow, it indicates that all the rivets of the differential bevel gear are sheared off. If the other rear wheel does not rotate, the half shaft should be disassembled and inspected for breakage.
15
3
Share

What is the emission standard of Volkswagen Lavida Plus?

Volkswagen Lavida Plus complies with the China VI emission standard. Below is the relevant information about Volkswagen Lavida Plus and its emission standards: Introduction to Volkswagen Lavida Plus: The Lavida Plus is a compact four-door, five-seater, front-engine, front-wheel-drive sedan released by SAIC Volkswagen Group in April 2018. It is equipped with three engine options: 1.2T, 1.4T, and 1.5L, paired with a 5-speed manual, 6-speed automatic, or 7-speed dual-clutch transmission. Introduction to Vehicle Emission Standards: Vehicle emissions refer to harmful gases such as CO (carbon monoxide), HC+NOx (hydrocarbons and nitrogen oxides), and PM (particulate matter, soot) released from exhaust. These harmful gases are byproducts of the engine's combustion process. The causes of these emissions vary: CO is an intermediate product of incomplete fuel oxidation, occurring when oxygen is insufficient. High fuel concentration or uneven fuel mixture can increase CO emissions. HC consists of unburned fuel particles, resulting from uneven fuel mixture or combustion chamber wall cooling, causing some fuel to be emitted without burning. NOx is produced during the combustion of fuel (gasoline). PM is another byproduct of fuel combustion under oxygen-deficient conditions, particularly noticeable in diesel engines due to their compression-ignition system, where diesel fuel cracks under high temperature and pressure, producing visible soot.
15
5
Share

What is the appropriate tire pressure for the Emgrand GL?

The appropriate tire pressure for the Emgrand GL is set between 2.3 and 2.5 bar. Information about car tire pressure and the Emgrand GL is as follows: Introduction to car tire pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. In car maintenance, the engine is the heart of the car, and its damage will lead to the end of the car's life. Similarly, tire pressure is the blood pressure of the car, and the level of tire pressure plays a crucial role in the performance and power of the car. The normal tire pressure value of a car tire ensures the normal operation of the car. Generally, the tire pressure value of a family car is set between 2.3 and 2.5 bar, and the tire pressure value in summer is different from that in winter. Introduction to the Emgrand GL: In terms of body size, the Emgrand GL has a length, width, and height of 4725mm, 1802mm, and 1478mm respectively, with a wheelbase of 2700mm. In terms of appearance, the Emgrand GL innovatively adopts a floating treatment for the shield-shaped water ripple grille, which is integrated with the sharp eagle-eye projection headlights to outline a beak-like floating front face. The wide lower grille design with a strong sense of power and the embellishment of crystal-like LED daytime running lights add a dynamic touch to the car's front face amidst its sharp and imposing momentum.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.