How often should the transmission fluid be changed in a 2013 Infiniti QX50?

2 Answers
DelHenry
07/28/25 7:30pm
The transmission fluid in a 2013 Infiniti QX50 should be changed every two years or 40,000 kilometers, with a replacement capacity of 6 liters. Transmission fluid is an oil product that keeps the gear system clean, providing lubrication to extend the lifespan of the transmission components. It offers effective lubrication even in low-temperature conditions and reduces oil loss under harsh operating conditions. The Infiniti QX50 is a vehicle under the Infiniti brand, with dimensions of 4744mm in length, 1803mm in width, and 1614mm in height, and a wheelbase of 2880mm. In terms of exterior design, this car features a honeycomb-style grille, polygonal fog light areas, and LED daytime running lights.
Was this review help?
16
1
Share
DiStephanie
08/12/25 12:32am
I previously drove a 2013 Infiniti QX50, and changing the transmission fluid is quite crucial. Generally, manufacturers recommend replacing the transmission fluid every 60,000 miles or approximately every 4 years, which I always adhered to while driving. If your driving habits involve frequent stop-and-go city commutes or driving in mountainous areas, the fluid can degrade faster—signs like darkening or a burnt smell may indicate the need for an earlier check. Always use the manufacturer-recommended fluid to ensure smooth gear shifts and avoid issues like slipping or overheating. Regular changes not only enhance the driving experience but also save time and money in the long run, as prolonged use of degraded fluid can damage transmission components, with repairs often costing thousands. I always combine this with other maintenance tasks, like brake or engine oil checks, to maximize efficiency.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

How to Reset the Maintenance Light on a Suzuki Vehicle?

First, turn on the ignition switch of the Suzuki vehicle, then press and hold the indicator selection button on the right side for more than 5 seconds. The instrument display will flash "OIL" once and then continue to display. Release the indicator selection button, then quickly press the button 5 times within 2 seconds. Finally, "OIL" will flash 3 times and then turn off, completing the reset operation.
6
3
Share

How to Remember the Steps for Independent Lane Changing in Subject Three?

"One light" refers to the turn signal. Don't forget the turn signal when changing lanes. "Two looks" refer to observing the road conditions. Make sure to observe thoroughly before changing lanes. "Three quick" refers to turning the steering wheel promptly. The lane-changing action should be swift. "Four no" refers to not changing lanes continuously. Change one lane at a time.
4
2
Share

How to Adjust the Ignition Timing Angle?

When the engine speed changes, the phase relationship between the breaker cam and the distributor shaft is automatically altered to adjust the ignition timing angle. By utilizing the centrifugal force generated by weights that increases with speed to overcome the spring force and swing outward, the linkage mechanism causes the cam to advance an angle on the shaft, thereby increasing the ignition timing angle.
17
0
Share

How to Switch Between Full Screen and Split Screen on BMW 525?

Open the driver's side door of the BMW 5 Series. Press the brake pedal to prepare to start the engine. Press the one-touch start button to start the engine and let it idle. The multifunction display will light up, and the vehicle's power will be fully connected. Press the central control display start button. After pressing the button, the multifunction display system will be ready for use. There are three options in the settings menu. Press the second option to enable split screen.
20
4
Share

How to Solve the Problem of Car Air Conditioning Sometimes Cooling and Sometimes Not

Check whether the air conditioning temperature control switch is malfunctioning and whether its circuit is loosely connected. Check whether the internal components of the air conditioning control module are malfunctioning and whether its circuit is loosely connected. Check whether there is moisture in the air conditioning pipeline, which causes icing and blockage in the pipeline when the air conditioning is working. Check whether the air conditioning expansion valve is working abnormally.
2
3
Share

How to Connect Car Amplifier Wires?

First, check if the car's head unit is the original factory model. Then find an amplifier control wire; the amplifier's connector is REM, which requires positive power. Next, connect a dedicated amplifier fuse from the positive terminal of the battery. The wire should run from the fuse to the +B terminal of the amplifier. After that, connect the ground near the amplifier to the GND terminal of the amplifier. Once installed, you can connect the speakers.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.