How often should the transmission fluid be changed for an Audi A4L?

1 Answers
JuniperFitz
07/25/25 8:01am
Audi A4L transmission fluid should be changed every 60,000 kilometers, with a replacement capacity of 7L. The interval can be adjusted based on actual driving conditions. Transmission fluid replacement methods: 1. Gravity replacement; 2. Machine circulation replacement; 3. Oil pan removal and replacement, which thoroughly replaces and cleans the fluid from the source and can also address a dirty oil filter. The Audi A4L has body dimensions of 4761mm in length, 1826mm in width, and 1439mm in height, with a wheelbase of 2869mm. The interior continues the Audi family design, featuring exquisite craftsmanship and high-quality materials. It is equipped with a new 8-speed Multitronic continuously variable manual transmission, ensuring smoother gear shifts and more efficient power transmission, enhancing driving comfort and fuel economy.
Was this review help?
13
4
Share
More Forum Discussions

What is the reason for abnormal noise when starting the car?

The reasons for abnormal noise when starting the car: 1. The sound of the timing chain; 2. Insufficient lubrication during cold start, resulting in friction noise from metal parts; 3. The sound produced by the slipping of the motor belt during cold start. Check the tightness of the motor belt and see if there is any aging; 4. Poor retraction of the starter; 5. The battery has issues, either it is undercharged or its lifespan has expired. For example, forgetting to turn off the headlights when parking or not turning off the car's electrical appliances, leading to undercharging. In such cases, the battery needs to be replaced. It is recommended to go to a 4S shop or a professional auto repair shop promptly for the technician to inspect and determine the problem before carrying out the appropriate repair.
7
1
Share

Where is the cabin air filter located in the Skoda New Octavia?

The cabin air filter in the Skoda New Octavia is located behind the glove compartment. You can access it by removing the glove compartment. The cabin air filter is designed to filter various particles from the outside air, such as dust, pollen, soot, abrasive particles, ozone, odors, nitrogen oxides, sulfur dioxide, carbon dioxide, benzene, etc. It helps maintain clean air inside the vehicle and ensures the health of the occupants. The Octavia is a compact sedan under the Skoda brand, with body dimensions of 4675mm in length, 1814mm in width, and 1460mm in height, and a wheelbase of 2686mm. The Octavia is equipped with three engine options: a 1.5L naturally aspirated engine, a 1.2L turbocharged engine, and a 1.4L turbocharged engine.
19
2
Share

What is the difference between halogen headlights and LED lights?

The detailed differences between halogen headlights and LED lights are as follows: 1. Different principles: LED headlights emit light through diodes, while halogen lights use tungsten filaments to emit light. 2. Different energy consumption: LED lights consume less energy, whereas halogen lights consume more. 3. Different brightness: LED lights are brighter than halogen lights. 4. Different color temperatures: LED lights offer various color temperature options, while halogen lights have only one. Relevant introductions about halogen headlights and LED lights are as follows: 1. LED headlights, also known as automotive headlamps, are lighting fixtures configured to illuminate the road ahead for nighttime driving and are symmetrically installed on both sides of the front end of the vehicle. 2. Halogen headlights are a new generation of incandescent lamps, which are tungsten lamps filled with halogen elements such as bromine or iodine, or their compounds.
19
3
Share

How to Use the S Mode in Golf?

S gear is the sport mode of the car (S stands for Sport). In S gear sport mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer time. This allows the car to travel at low gear and high RPM for an extended period, thereby achieving greater torque output and acceleration. While the car is moving, simply push the gear lever into the S position. It is typically used for climbing slopes and rapid overtaking. Below is an introduction to other gear positions: 1. P (Parking gear). When parking the car, the gear lever must be shifted into the P position. 2. R (Reverse gear). Shift into R gear when the car needs to reverse. 3. N (Neutral gear). The N position is equivalent to neutral and can be used when starting the car, parking without leaving the vehicle, or during towing. 4. D (Drive gear). Place the gear lever in the D position for normal driving, and the car will automatically shift between forward gears. The D gear is the most commonly used gear position.
5
5
Share

What are the differences between the Brilliance BMW 5 Series and the imported 5 Series?

Brilliance BMW is a domestically produced BMW. The differences between the imported BMW 5 Series and the domestic BMW 5 Series are as follows: 1. The body and wheelbase of the domestic BMW 5 Series are longer than those of the imported BMW 5 Series. 2. The imported BMW and domestic BMW can be distinguished by the logo at the rear of the car. The domestic BMW has the words "Brilliance BMW" at the rear. The domestic BMW has a higher chassis, while the imported BMW has a slightly lower chassis because the imported BMW is more sport-oriented and designed with a sportier feel. 3. The domestic BMW has only one interior option, while the imported BMW offers two interior choices. 4. The engine of the imported BMW 5 Series is purely imported from Germany, whereas many engine components of the domestic BMW 5 Series are processed and sourced domestically.
10
3
Share

What Type of Engine Oil is Suitable for the Arrizo 5?

The suitable engine oil model for the Arrizo 5 is 5W-30. Below are the precautions for adding engine oil to the Arrizo 5: 1. Choose engine oil based on the engine's requirements: It is unnecessary to use overly advanced oil in engines with lower requirements, nor should lower-grade oil be used in engines with higher requirements. 2. Try to choose multi-grade oil: Multi-grade oil is economical, long-lasting, and efficient, providing better protection for the engine. Due to the characteristics of multi-grade oil, it may appear darker earlier or have lower oil pressure compared to regular oil, which is normal. 3. Some domestic brand engine oils are of quite good quality and are much cheaper than imported counterparts, so they can be used with confidence. There is no need to blindly pursue 'foreign oil.' 4. If the engine is in good condition and the seasonal temperature is low, use oil with lower viscosity to ensure smooth oil flow. In high-temperature seasons or when the engine is severely worn, using higher-viscosity oil helps form an oil film and reduce engine wear.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.