How often should the transmission fluid be changed for a Classic Focus?

1 Answers
LaEmerson
07/23/25 8:24pm
The transmission fluid for a Classic Focus should be changed approximately every 2 years or 60,000 kilometers. The consequences of not changing the fluid for a long time and the methods are as follows: Consequences of not changing the fluid for a long time: Automatic transmission fluid is different from manual transmission fluid. Automatic transmission fluid not only serves as a lubricant but also plays a role in gear shifting. Therefore, not changing the fluid for a long time can lead to poor lubrication, severe component wear, and a shortened lifespan of the transmission. It can also cause strong jerking sensations during gear shifts. Hence, it is necessary to change the transmission fluid regularly, and the transmission fluid filter should also be replaced during the fluid change. Methods for changing transmission fluid: There are two methods for changing the transmission fluid: gravity change and machine flush. It is recommended to use the machine flush method because it helps clean the transmission, whereas the gravity change method only replaces the fluid without cleaning the transmission.
Was this review help?
17
4
Share
More Forum Discussions

Has the Mercedes-Benz CLA been discontinued?

The Mercedes-Benz CLA has been discontinued. Below is a relevant introduction to the Mercedes-Benz CLA: 1. Powertrain: Equipped with a 2.0-liter four-cylinder turbocharged engine, delivering a maximum output of 355 horsepower (265 kW) and a peak torque of 450 Nm. The transmission is paired with a seven-speed AMG SPEEDSHIFT DCT sports transmission. 2. Interior: Features a brand-new three-spoke sports steering wheel, X-shaped air vents, a split-screen display, and a redesigned instrument panel, all of which provide a refreshing and sporty touch.
19
1
Share

How Often Should the Camry's Coolant Be Replaced?

Generally, the coolant in a Camry should be replaced every two years or approximately 40,000 kilometers. Before completely replacing the coolant, a thorough inspection should be conducted to check for any signs of leakage or cracks in the pipes, with particular attention to the five-way water pipe. The five-way pipe gets its name from having five connecting interfaces to various parts. The coolant flows through the five-way pipe and is then distributed to different parts of the car to function. If there is any leakage of coolant in this section, the water pipe should be replaced or the interface re-secured as needed. Drain the old coolant, then flush the liquid channels with clean water. Add clean water to the coolant reservoir and continue filling until water flows continuously through the engine cooling system. Then, idle the engine for 3 to 5 minutes to circulate the water. Initially, the water draining from the reservoir may have a faint pink tint. Continue adding clean water until the outflow is clear. Note: Don’t forget to remove the heater hose and drain the water from the heater core. About one hour after draining, add the new coolant through the radiator hose, which allows the coolant to flow quickly into the radiator. Then, add another container of coolant to the reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is purged from the system. Top up the coolant again until it reaches the "MAXT" mark on the reservoir.
15
3
Share

How to Sleep in the Car Without Feeling Hot in Summer?

Sleeping in the car with the air conditioning on will prevent you from feeling hot during summer. Precautions: 1. Poor air circulation: With the windows closed, the air inside the car does not circulate, preventing fresh oxygen from entering. The air conditioning's recirculation mode can introduce a certain amount of carbon monoxide. Carbon monoxide is colorless and odorless; inhaling a small amount is harmless, but as its concentration increases, it can lead to oxygen deprivation and death. 2. Low oxygen levels: Prolonged use of the recirculation mode can deteriorate the air quality inside the car. Over time, the reduced oxygen levels and increased carbon monoxide concentration can cause symptoms like chest tightness, shortness of breath, and dizziness.
4
2
Share

Why is the reversing image reversed?

The following are possible reasons why the reversing image is reversed: 1. Incorrect installation of front and rear cameras: Mistakenly installing the front camera at the rear of the vehicle. The main difference between front-view and rear-view cameras lies in the image mirroring. If a rear-view camera is used as a front-view camera, the image displayed on the screen will be reversed left and right. 2. System setting issues: The driver can re-engage reverse gear, find the settings button in the navigation device under the reversing image mode, look for the mirror adjustment or reversing mirror function, and then click to turn it off.
13
5
Share

What are the functional introductions of the Haval H6max?

Haval H6max's functional introductions can be explained from both the powertrain and the model aspects. Powertrain aspect: The Haval H6max is equipped with a 1.5GDIT-EVO engine, paired with the second-generation 7DCT transmission, delivering a maximum power of 124kW and a peak torque of 285Nm. It is worth mentioning that the powertrain of the H6max has undergone significant upgrades in all aspects, with the engine's thermal efficiency reaching 38% and the transmission's comprehensive transmission efficiency reaching 95.6%. Model aspect: The Haval H6max has an overall design that appears more fashionable and sporty. The front face still features a large-sized air intake grille, fully adorned with chrome accents, and the mesh design is very tight, creating a strong visual impact. On the side of the body, the vehicle's visual effect appears larger, which is attributed to the newly designed larger rear quarter window. It is worth noting that the overall dimensions of the H6max have been increased compared to the older models.
4
5
Share

How to display speed on Audi A4 dashboard?

Audi A4 dashboard can display speed. Method to display speed: First, press the page switching button on Audi's multifunctional dashboard to adjust the information displayed on the driving display. The driving display will first show the automatic lighting option. After the automatic lighting option is displayed, locate the activation button on the left side of the steering wheel. Pressing the activation button will display the driving speed. Display of car speedometer: One type of car speedometer displays speed via LCD, with similar principles, except the output is shown on an LCD screen. The speedometer consists of a permanent magnet fastened to the drive shaft, an aluminum cup with shaft and pointer, a housing, and a dial firmly attached to the case. When not in operation, the aluminum cup, under the force of a spiral spring, keeps the pointer at the zero position on the scale. When the car is moving, the drive shaft rotates the permanent magnet, whose magnetic lines of force generate eddy currents in the aluminum cup. The interaction between the eddy currents and the magnetic field of the permanent magnet produces torque, overcoming the elastic force of the spiral spring, causing the aluminum cup to turn the pointer by an angle.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.