···
Log in / Register

How often should the tires on the new Mondeo be replaced?

4 Answers
ArthurRose
07/29/25 7:05am
The tires on the new Mondeo should be replaced every 3 years or 80,000 kilometers, but the specific timing should also be determined based on the condition of the tires. If the tires show signs of bulging or severe tread wear in advance, replacement is recommended. Tires are one of the important components of a car, often mounted on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road, and maintaining the vehicle's driving performance. The new Mondeo is a flagship model from Changan Ford, featuring high technology content and excellent manufacturing craftsmanship. It not only incorporates multiple innovative technologies but also achieves comprehensive improvements in premium quality, powertrain, and safety performance.
Was this review help?
11
2
Share
AveryRose
08/12/25 11:34pm
I've been driving the new Mondeo for several years now, and I don't replace tires on a fixed schedule—it depends on the specific situation. Generally speaking, tires should be inspected and replaced after every 30,000 to 50,000 kilometers or about 5 years of use, but this isn't a hard-and-fast rule. For my current car, tire wear mainly depends on tread depth. If it's worn down to below 1.6mm or the tread blocks are nearly gone, it's time to replace them immediately—safety comes first. Additionally, as tires age, the rubber can deteriorate and crack, especially if the car is parked outdoors frequently, where exposure to wind and sun accelerates degradation. I recommend checking tire pressure and tread depth every quarter, using a dedicated tool or even a coin to measure. Driving habits also play a crucial role—if you often brake hard or drive on rough roads, wear will be faster, so replacing them sooner saves hassle. Remember, tire condition directly affects braking and handling, so don't skimp on safety to save a little money.
Was this review help?
7
4
Share
Expand All
OliveDella
10/04/25 5:25am
Guys, I'm a seasoned expert when it comes to tire maintenance for the new Mondeo. Replacement intervals depend on wear and aging, typically checking every 40,000 kilometers. Don't hesitate if the tread depth goes below 1.6mm. Tires should be considered for replacement after 5 years regardless of mileage, as the rubber hardens and cracks, posing risks. Driving style has a big impact—high-speed cornering accelerates wear, and incorrect tire pressure shortens lifespan. I rotate tire positions every six months to balance wear, extending their life by a year or two. Key points: regularly inspect visually for cracks or bulges, check tire pressure weekly to maintain the manufacturer's recommended value, and don't wait for an incident to act. Safety always comes first; delaying replacement can lead to skidding or loss of control, especially on rainy highways.
Was this review help?
11
5
Share
Expand All
Dave
11/17/25 7:01am
When driving the new Mondeo, I noticed that the timing for tire replacement isn't fixed. If driven frequently, they may need replacement after about 30,000 kilometers, but even with occasional use, aging tires should be changed after five years. Simply put, check the tread depth using a coin or professional gauge—replace them immediately if it's below standard. Don't overlook driving habits; aggressive driving accelerates wear. The cost isn't high, but safety comes first. I recommend a quick check every few months to avoid future hassles.
Was this review help?
19
5
Share
Expand All
More Forum Discussions

What does RDM mean on a car?

RDM on a car stands for random playback of multimedia music. Some car models have RPT next to RDM, which stands for repeat, meaning loop playback. There are many letters on car players, besides RDM and RPT, there are also VOL (volume), SEL (settings), MODE (mode), REW (rewind), FF (fast forward), and MUTE (mute). Common English abbreviations on cars and their meanings: MAP navigation, MENU menu, VOL volume, OK confirmation button, RADIO broadcasting system, MEDIA multimedia system, AC air conditioning system, MODE mode switching, LEFT left turn, RIGHT right turn, LIGHT lights, ABS anti-lock braking system, ESP electronic stability program, SRS airbag, SET cruise control function button, MUTE mute button, which can mute with one click.
18
3
Share

How to Solve the Issue of the Exhaust Monitoring System Warning Light Being On?

The exhaust monitoring system warning light remaining on for an extended period indicates a malfunction in the vehicle's emission system. Solutions include changing the fuel or repairing the emission system. Below is more relevant information: 1. Functions of Vehicle Warning Lights: The vehicle's dashboard features various warning lights. The battery light indicates the working status of the vehicle's battery, while the front and rear fog light indicators show the operational status of the fog lights. The door status indicator displays whether the doors are fully closed. If a door is not completely closed, the light will illuminate to remind the owner to close it properly, and it will turn off once the door is securely shut. When the front and rear fog lights are activated, both lights will illuminate, with the left side indicating the front fog light and the right side the rear fog light. When the turn signal is on, the turn signal indicator will flash at a certain frequency and automatically turn off once the turn signal is deactivated. 2. Reasons for Warning Light Activation: When the vehicle's computer receives parameters from the oxygen sensor indicating that the exhaust emissions significantly exceed national legal standards and the internal program cannot adjust them back within the standard range, the engine control computer will trigger the pollution emission warning light (yellow pollution light) on the dashboard. This alerts the owner to visit a service station to check the cause of the engine pollution emission light.
11
1
Share

What does the inspection validity period until June 2021 mean?

Inspection validity period until June 2021 means that within 90 days of the annual inspection expiration date, you can go to the local vehicle inspection agency for inspection and obtain a new motor vehicle inspection compliance mark. Below is the relevant introduction to vehicle annual inspection: 1. Initial annual inspection: The inspection conducted for motor vehicles to apply for a license plate is called the initial annual inspection. The purpose of the initial annual inspection is to verify whether the motor vehicle meets the conditions for applying for a license plate. 2. Definition: National regulations stipulate that motor vehicles must regularly pass inspections such as exhaust emissions, vehicle appearance, lights, brakes, chassis, etc., and be issued an inspection compliance mark without any traffic violation records. All annual inspection dates are based on the date registered on the vehicle license. Motor vehicles must undergo safety technical inspections according to the following periods from the date of registration, commonly referred to as "annual inspection" or "annual review".
16
4
Share

How to perform a hill start with an automatic transmission?

Method for performing a hill start with an automatic transmission: 1. When stopping on a slope, press the brake pedal to park; 2. Release the brake pedal once the vehicle has started; 3. Then release the handbrake and press the accelerator pedal; 4. This can effectively prevent the vehicle from rolling back due to interrupted braking. The main reason for rolling back during a hill start with an automatic transmission is insufficient engine traction at the beginning. Therefore, pressing the accelerator pedal to increase engine speed during the start can prevent rolling back. The gears of an automatic transmission are: P: Parking gear, after shifting into this gear, the wheels are locked, and the car remains stationary, used when parking; R: Reverse gear, used when reversing; N: Neutral gear, when waiting at traffic lights, shift into neutral and pull up the handbrake to park, avoiding the danger of accidentally pressing the accelerator pedal and causing the car to surge forward; D: Drive gear, shift into D when moving forward, for normal driving conditions, no need to change gears, you can fully trust the car's built-in shifting program; 2: Second gear, uses the engine's speed to slow the car down when going downhill, reducing the load on the brakes; 1: First gear, when fixed in first gear, it can exert strong engine braking force and maintain powerful torque for the car.
2
5
Share

How to Repair a Dented Bumper?

There are several methods to repair a dented bumper: 1. Pour hot water on the dented area. The heat will help pop out the dent. Once the dent returns to its original shape, apply cold water to the heated area to cool it down and allow the rubber to contract and restore. 2. Remove one of the car's screws, reach inside the bumper from behind, and push forcefully to pop out the dent. 3. Use specialized dent repair tools. Bumpers serve multiple purposes, including safety protection, vehicle decoration, and improving aerodynamic performance. From a safety perspective, bumpers absorb impact during low-speed collisions, protecting the front and rear body of the vehicle. In accidents involving pedestrians, bumpers also help protect them. Aesthetically, bumpers are decorative components that enhance the vehicle's exterior appearance.
12
3
Share

How to reset the Suzuki SX4 maintenance light?

Suzuki SX4 maintenance light reset method: 1. Turn on the ignition switch, briefly press the right information display selector handle, and the information display screen will go black and stop; 2. Press and hold the left odometer button for more than 5 seconds until the oil lock display appears on the screen, then release the button; 3. Release the button and press it 5 times consecutively within 2 seconds. The oil lock will turn off, displaying 'SUCCESSFUL', indicating the reset operation is complete. The Suzuki SX4 is a business vehicle under Suzuki, featuring a significantly redesigned front face. The newly designed vertical slat grille connects with the reshaped headlight cluster, creating a very outstanding effect. Combined with the more complex lines of the front bumper, the overall appearance is more fashionable.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.