How often should the throttle body of a Volvo S60 be cleaned?

1 Answers
LeJace
07/29/25 6:21pm
Volvo S60 throttle body should be cleaned every 40,000 kilometers. Effects of not cleaning the throttle body for a long time: 1. It may cause errors in the throttle opening degree. 2. It may allow impurities and air to enter the engine combustion chamber. Methods for cleaning the car throttle body: 1. Turn off the ignition switch and disconnect the negative terminal of the battery. Remove the throttle cable, intake hose, and screws fixing the throttle body. 2. Clean the throttle body with carburetor cleaner, and use cotton thread to wipe areas that are hard to reach. 3. After cleaning, reinstall the throttle body following the disassembly sequence, and check if the cleaned throttle body allows smooth air intake.
Was this review help?
10
0
Share
More Forum Discussions

At what speed does the car lane change assist activate?

Car lane change assist function requires the vehicle speed to reach 60 before it activates. Meaning of lane change assist: Lane change assist can also be called blind spot monitoring. This system is implemented through hidden sensors at the rear of the car and corner lights below the A-pillar or other methods to alert the driver of approaching vehicles from behind. Function of lane change assist: When changing lanes, if there is a vehicle approaching from behind, the lane change assist will issue an alarm to warn the driver, ensuring safe lane changing. However, there is a common misconception about lane change assist—it is only a warning device and cannot perform the lane change for you. Lane change assist alerts the driver of approaching vehicles from behind during lane changes, eliminating blind spots and improving driving safety, which is particularly helpful for novice drivers. The principle of lane change assist is similar to radar. When preparing to change lanes with the turn signal on, if the driver fails to notice other vehicles in adjacent lanes, the LED on the rearview mirror will flash to warn the driver to pay attention to safety.
16
3
Share

What is the reason for the pinko gear jam in the motorcycle speedometer?

Motorcycle speedometer pinko gear jam may be due to lack of lubrication in the bearings. Introduction to the speedometer: The function of the motorcycle speedometer is to display changes in driving speed, including the instantaneous speed of the vehicle, the engine speed, as well as the accumulated mileage. Driving speed is usually indicated by a pointer that constantly changes while driving. Other information is typically displayed using rolling numbers similar to those on an electric meter. Working principle of the speedometer: When the vehicle is in motion, the drive shaft rotates the permanent magnet, whose magnetic field induces eddy currents in the aluminum cup. The interaction between the eddy currents and the magnetic field of the permanent magnet generates torque that overcomes the spring force of the spiral spring, causing the aluminum cup to deflect in the direction of the permanent magnet's rotation. As a result, the aluminum cup turns the pointer by a certain angle.
6
1
Share

Where is the OBD Port on Nissan Sunny?

Nissan Sunny's OBD port is located beneath a storage compartment on the left side of the driver's cabin. Below is relevant information about Nissan Sunny: 1. The Sunny replaces its peanut-shaped headlights with sharp triangular streamlined ones, integrating twin-star arranged light clusters and inline embedded turn signals, exuding a crystal-clear fashionable charm that delivers a sharp visual impression. 2. Nissan Sunny employs an EFI dual-mode dual-port multi-point fuel injection system, which can provide precise and appropriate fuel injection based on different road conditions and engine load levels. Therefore, it offers more reliable air-fuel mixture and responsiveness compared to conventional electronic fuel injection systems. 3. The Sunny's suspension system adopts a front MacPherson and rear multi-link setup, balancing cornering tracking and straight-line stability. When maneuvering through traffic, the body maintains excellent stability, with steering wheel feedback being just right, allowing very precise control over the car's direction.
8
3
Share

What is the fuel tank capacity of the Hitachi 330 in liters?

The fuel tank capacity of the Hitachi 330 is 630L. The engine model of the Hitachi excavator: The engine model is Isuzu ISUZUAA-6HK1XQA, with a rated power (Kw/rpm) of 184/2000, a displacement (L) of 7.79, 6 cylinders, bore × stroke (mm×mm) of 115×125, water-cooled, and features direct injection, turbocharging, and an intercooler. Main dimensions of the Hitachi excavator: Overall transport length (mm) is 10970, overall transport width (mm) 3190, overall transport height (mm) 3230, full cab height (mm) 3140, counterweight ground clearance (mm) 1160, track contact length (mm) 3730, total track length (mm) 4640, track shoe width (mm) 600, total track width (mm) 3190.
4
5
Share

How to reset the maintenance light on Great Wall Haval H6?

First, turn on the ignition switch, keeping the vehicle powered but not started. Press the reset button on the instrument panel, and the display will show the reset system. Each press of the reset button will switch to the next reset system. Select the maintenance reset system, press and hold the reset button for about 3 seconds until the relevant icon appears on the instrument display, indicating that the maintenance light has been successfully reset. Below are the specific reset methods: 1. With the engine off, press and hold the short-distance counter reset button below the tachometer. Turn the ignition switch of the Great Wall Haval H6 to the ON position, then release the short-distance counter reset button. The display will show the "SERVICE" indicator. 2. Pull out the minute button on the clock and turn it to the right. The mileage will appear on the display. Turn off the engine to reset the reminder message. Turn the ignition switch to the ON position, and the "SERVICE" indicator will disappear.
9
1
Share

What does the 3zone car button mean?

3zone refers to three-zone control. When the switch light is on, it means the rear air conditioning is controlled by the rear control panel. When the switch light is off, it means all air conditioning is uniformly controlled. Below is relevant information about the zoning feature: 1. Zoning function: The zoning function is not particularly high-tech; it simply adds air conditioning dampers to divide the air ducts more finely. There is a main mixing damper, and then the ducts branch out to each zone, with each zone having an independent controller. 2. Purpose of zoning: It provides a more comfortable environment for drivers and passengers, as some children or elderly and weak individuals may not tolerate strong cold air or low temperatures. The purpose of zoning is to accommodate passengers in each area, allowing everyone to freely control the air conditioning speed and temperature within their own space.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.