How often should the throttle be cleaned on a Sagitar?

1 Answers
Long
07/29/25 6:20pm
The throttle cleaning interval for the Sagitar, as specified in the maintenance manual, is recommended every 15,000 to 30,000 kilometers. The exact timing depends on factors such as the vehicle's operating environment, fuel quality, and air filter replacement schedule. The reasons for cleaning the throttle are as follows: 1. As the vehicle accumulates mileage, carbon deposits naturally build up, and the throttle is particularly prone to carbon accumulation. 2. Increased carbon deposits can thicken the throttle plate. Given the throttle's precise control, even minor carbon buildup can disrupt the air intake volume, causing it to deviate from the engine computer's requirements. This leads to poor combustion, reduced engine power, and increased fuel consumption. 3. In more severe cases, carbon buildup can cause throttle sticking, resulting in symptoms like sluggish acceleration, engine vibration, higher fuel consumption, or even stalling. Therefore, regular throttle cleaning is essential.
Was this review help?
7
1
Share
More Forum Discussions

Is a tire pressure of 2.8 normal in summer?

Summer tire pressure of 2.8 is not normal. According to the provisions and requirements of the international GBT2978-2008 standard, the standard tire pressure for standard tires is 2.4-2.5bar. A pressure of 2.8bar exceeds the maximum value of the standard tire pressure, so it is not normal. Generally, the lower limit of the standard tire pressure for car tires is sufficient. For example, the lower limit for standard tires is 2.4bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1bar lower than the standard to avoid tire blowouts due to high temperatures. Hazards of excessive tire pressure: The friction and adhesion of the tire will decrease, affecting braking performance; It can cause steering wheel vibration and deviation, reducing driving comfort; It accelerates the local wear of the tread pattern in the center of the tire, reducing the tire's lifespan; The vibration of the car body increases, indirectly affecting the lifespan of other components; It causes excessive stretching and deformation of the tire cords, reducing the elasticity of the tire body and increasing the load the car bears while driving; Puncture resistance decreases. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, and the impact can cause internal cracks and explosions, leading to a blowout.
14
2
Share

What is the principle of car steering?

The principle of car steering mainly involves the steering wheel driving the steering gear, which in turn activates the rack and pinion steering mechanism. This causes the front tie rod to swing left and right, changing the angle of the front wheels to achieve the steering effect. The car steering system is used to maintain or change the direction of the vehicle's movement, whether moving forward or backward. The car steering system is crucial for driving safety, which is why its components are referred to as safety-critical parts. Both the steering system and the braking system are essential safety systems that must be given high priority in vehicles. Structure of car steering mechanisms: In terms of widespread usage, there are four main types of steering mechanisms: worm and peg type (WP), worm and roller type (WR), recirculating ball type (BS), and rack and pinion type (RP). These four types of steering mechanisms have been widely used in automobiles. Among them, the recirculating ball steering mechanism and the rack and pinion steering mechanism have become the two primary steering systems in modern vehicles worldwide. Meanwhile, the worm-type steering mechanisms are gradually being phased out or retaining a minor role. Due to its various advantages, the rack and pinion steering mechanism has seen rapid development in small vehicles (including passenger cars, light trucks, and multi-purpose vehicles). On the other hand, larger vehicles primarily use the recirculating ball steering mechanism as their main structure.
18
4
Share

What is the heating symbol for a sedan?

The heating symbol in a car is typically a rotary knob. To increase the interior temperature, turn on the air conditioning and rotate the knob to the red zone. The heating switch symbol usually has red and blue markings on both sides, with the cold air setting on the left and the heating setting on the right. Turning the knob to the left lowers the car's temperature, while turning it to the right raises it. Some models also feature an automatic air conditioning system; pressing the AUTO button will allow the system to adjust the temperature automatically based on the interior conditions. Before turning on the heating, it's necessary to wait for the engine coolant temperature to rise. When the car is cold-started, the coolant temperature is at 0 degrees. Only after driving for some time will the temperature noticeably increase. Once the coolant temperature reaches around 90 degrees, the car's heating system will become effective. It's important to note that the A/C button should be turned off when using the heating. This is because the heating system utilizes the heat generated by the engine. Activating the air conditioning compressor can reduce the heating efficiency and increase fuel consumption. Driving with the heating on can lead to fatigue. It's advisable to adjust the air vents to avoid blowing directly at the head for extended periods, as this can cause drowsiness and affect driving safety. Periodically opening the windows to allow fresh air circulation is also recommended to maintain a comfortable and safe driving environment.
1
2
Share

How many points are deducted for driving or parking in violation of regulations?

When driving through an intersection without following the prescribed driving or parking rules, 2 points will be deducted. Below is a detailed introduction about vehicle violations: 1. Overview: Vehicle violations refer to motor vehicles violating the Road Traffic Safety Law and traffic management regulations. Penalties for vehicle violations include warnings, fines (vehicle impoundment), temporary suspension of driver's license, revocation of driver's license, cancellation of driver's license, administrative detention, and criminal liability for acts constituting a crime. 2. Basis for Penalties: According to the 'Road Traffic Safety Law of the People's Republic of China,' public security traffic management departments and their traffic police should promptly correct road traffic safety violations. Penalties for road traffic safety violations should be imposed based on facts and relevant provisions of this law.
19
3
Share

How Many Centimeters Should You Park from the Curb?

Parking within 30 centimeters from the curb is a requirement in the Subject 2 driving test, and the Subject 3 test also requires parking within 30 cm from the curb. Exceeding 30 cm will result in point deductions. For daily parking, it is also advisable to maintain a distance of no more than 30 cm from the curb. Article 56 of the 'Road Traffic Safety Law of the People's Republic of China' stipulates that motor vehicles shall be parked in designated areas. Parking on sidewalks is prohibited, except in parking spaces marked according to this law. When parking a motor vehicle on the roadside, the correct method for choosing a parking spot is as follows: When parking a motor vehicle, it must be parked in designated areas. If parking on the roadside is necessary, choose to park within marked parking spaces. When temporarily parking on the road, do not obstruct the passage of other vehicles and pedestrians. On roads without marked parking spaces, park as close as possible to the right side of the road, in the direction of traffic, with the vehicle body no more than 30 cm from the road edge. The driver must not leave the vehicle and must depart immediately after passengers alight or items are loaded/unloaded. In case of vehicle breakdown or an accident where the vehicle is difficult to move, turn on the hazard warning lights. At night, additionally turn on the hazard warning lights, position lights, and rear lights.
15
1
Share

How many meters from a bridge is parking prohibited for vehicles?

Parking is prohibited within 50 meters. According to the 'Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China': at intersections, railway crossings, sharp curves, narrow roads less than 4 meters wide, bridges, steep slopes, tunnels, and sections within 50 meters of these locations, parking is not allowed. Additional information: 1. On road sections with no-parking signs or markings: on road sections with separation facilities between motor vehicle lanes and non-motor vehicle lanes or sidewalks, as well as crosswalks and construction zones, parking is prohibited. 2. Bus stops, emergency stations, gas stations, fire hydrants, or fire stations: in front of bus stops, emergency stations, gas stations, fire hydrants, or fire stations (stations) and within 30 meters of these locations, parking is prohibited except for the use of these facilities.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.