How often should the spark plugs of the Baojun 730 be replaced?

1 Answers
StJason
07/30/25 4:35am
Baojun 730 spark plug replacement cycle: Under normal maintenance conditions, replacement is recommended every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the user manual. You can refer to the following standards for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. How spark plugs work: The spark plug's ground electrode is connected to the metal shell, which is threaded into the engine block via the cylinder head. The insulator primarily serves to isolate the metal shell from the central electrode. The terminal nut is the part of the spark plug that contacts the high-voltage coil. When current passes through the terminal nut and the central electrode, it ionizes the medium between the central electrode and the ground electrode, generating a spark to ignite the air-fuel mixture in the cylinder.
Was this review help?
16
3
Share
More Forum Discussions

How to set the time on Toyota Highlander?

The steps to set the time on Toyota Highlander are: Press and hold the DISP button on the right side of the steering wheel until the clock option appears on the multi-function display of the instrument panel. Then press and hold the DISP button again until the time display flashes. Press the DISP button once to adjust the hour. After 10 seconds, it will automatically enter the minute adjustment. Press and hold the DISP button again to adjust the minutes. Toyota Highlander is a vehicle produced by Toyota, which is a large-sized SUV. The dimensions of the vehicle are 4795mm in length, 1910mm in width, and 1760mm in height, with a wheelbase of 2790mm. It is equipped with a 3.5-liter V6 engine and a stepped 5-speed automatic transmission with manual mode, providing smooth and seamless acceleration.
19
4
Share

What is the solution for unsmooth car window operation?

Spray dashboard wax into the rubber seals on both sides of the window. Operate the window up and down several times, and you will notice a reduction in sticking or unsmooth movement. Spray dashboard wax into the rubber seals on both sides of the window again. Repeat the above steps until the car window operates without sticking, unsmooth movement, or noise. Use a car towel to wipe off any excess dashboard wax from the window rubber seal edges.
1
3
Share

Where is the fuel tank switch located in the Highlander?

The fuel tank switch in the Highlander is located on the dashboard in front of the driver. It is a button with a fuel pump icon - simply press it gently to open the external fuel tank cap. Typically, there are two toggle switches on the left side of the dashboard: one for opening the trunk and another for opening the fuel tank cap. The Highlander is a midsize SUV with body dimensions of 4890mm in length, 1925mm in width, and 1720mm in height, with a wheelbase of 2790mm. The new Highlander series is equipped with a 2.0-liter turbocharged engine that delivers 220 horsepower and a maximum torque of 350 Nm. This engine can output its maximum power at 5200 to 5600 rpm and is paired with a 6-speed automatic transmission.
8
2
Share

Where is the gear switch for the Buick LaCrosse located?

The gear switch for the Buick LaCrosse is located on the lower right side of the steering wheel, near the LCD screen on the center console. The Buick LaCrosse is a new mid-to-high-end sedan with body dimensions of 5026mm in length, 1866mm in width, and 1459mm in height. In terms of power, the Buick LaCrosse is equipped with a 1.5-liter inline 4-cylinder turbocharged engine and a 2.0-liter inline 4-cylinder turbocharged engine. The 1.5-liter inline 4-cylinder turbocharged engine has a maximum power output of 125kW and a maximum torque of 252Nm. The Buick LaCrosse features direct fuel injection for all models and front-wheel drive as the standard driving mode.
2
5
Share

What is the abbreviation for Qinghai license plates?

Qinghai license plate abbreviations range from Qing A to Qing H. Here is additional information: Abbreviations for Qinghai license plate numbers: The abbreviations for Qinghai license plate numbers are as follows: Qing A for Xining City, Qing B for Haidong City, Qing C for Haibei Prefecture, Qing D for Huangnan Prefecture, Qing E for Hainan Prefecture, Qing F for Golog Prefecture, Qing G for Yushu Prefecture, and Qing H for Haixi Prefecture. License plate numbers consist of 7 characters. The first character is the abbreviation of the province, the second character is the abbreviation of the prefecture-level city, and the third to seventh characters are a combination of numbers and letters. These plates are mounted on the front and rear of vehicles and are made of materials such as aluminum, iron, plastic, or paper. Functions of license plate numbers: They provide numbering and information registration for vehicles; they indicate the region to which a vehicle belongs; and they allow for the retrieval of the owner's and vehicle's registration information based on the license plate.
1
4
Share

How to Check a Vehicle's Emission Standard?

Check the back of the vehicle's environmental compliance label. You can roughly estimate the vehicle's emission standard based on its manufacturing year. Bring the vehicle registration certificate to the local DMV for inquiry. The page where the labeling starts contains the emission standard information.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.