How often should the spark plugs of Nissan Sylphy be replaced?

1 Answers
GiaLynn
07/30/25 7:13am
Nissan Sylphy spark plugs should be replaced every 40,000 kilometers. The spark plug is a crucial component of the gasoline engine's ignition system. It introduces high-voltage electricity into the combustion chamber, causing it to jump the electrode gap and generate a spark, thereby igniting the combustible air-fuel mixture in the cylinder. If the spark plug is damaged, it can directly lead to various issues such as leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, which affects the normal operation of the vehicle. Severe erosion of the spark plug, such as blistering at the top, damage, or melted and eroded electrodes, indicates that the spark plug is damaged and should be replaced. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, and remove the high-voltage distributor wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage distributor wires in the correct firing order, and then secure the cover.
Was this review help?
12
1
Share
More Forum Discussions

How to Determine if the Expansion Valve is Faulty?

Signs of a faulty expansion valve: 1. The low-pressure pipe is not cold to the touch; 2. The dryer bottle is frosted; 3. The condenser is frosted; 4. The expansion valve or condenser makes a hissing sound when not in operation; 5. Abnormal high and low-pressure readings and abnormal high-pressure pipe temperature. The expansion valve is a crucial component in the refrigeration system, typically installed between the liquid receiver and the evaporator. It converts medium-temperature, high-pressure liquid refrigerant into low-temperature, low-pressure wet vapor through throttling. The refrigerant then absorbs heat in the evaporator to achieve the cooling effect. The valve flow is controlled by the superheat change at the end of the evaporator to prevent underutilization of the evaporator surface and knocking phenomena.
17
1
Share

How to heat the rearview mirror of Audi Q3?

Audi Q3 rearview mirror heating method is: 1. Find the switch on the main driver's door panel; 2. Rotate the knob on the switch to the middle position. The function of the rearview mirror is to reflect the situation behind, beside and below the car, so that the driver can indirectly see these positions clearly, expand the driver's field of vision, and increase the safety of reversing and driving. Taking the 2021 Audi Q3 as an example, it is a compact SUV with a body size of: length 4481mm, width 1848mm, height 1616mm, wheelbase of 2680mm, minimum ground clearance of 152mm, and body weight of 1570kg.
8
2
Share

Is the airbag scrapped after deployment?

When an airbag deploys, it is indeed rendered unusable. During a collision while the vehicle is in motion, the airbag sensor first receives the impact signal. Once the impact reaches the specified intensity, the sensor activates and sends a signal to the electronic control unit. Upon receiving the signal, the electronic control unit compares it with its pre-stored data. If the conditions for airbag deployment are met, the drive circuit sends an activation signal to the gas generator in the airbag module. The gas generator then ignites the inflator material, producing a large volume of gas. This gas is filtered and cooled before entering the airbag, causing it to rapidly inflate through the cushion cover in a fraction of a second. The airbag forms an elastic cushion in front of the driver or passenger, then promptly deflates and contracts to absorb the impact energy, effectively protecting the head and chest from injury or reducing the severity of injuries.
9
3
Share

Where is Hawtai Motors produced?

Hawtai Motors is produced in Rongcheng, Shandong; Ordos, Inner Mongolia; and Yanbian, Jilin. The models under Hawtai include the Santa Fe, Santa Fe Classic, B11, Terracan, and Baolige. Taking the 2017 Santa Fe as an example, it is a compact SUV with body dimensions of 4426mm in length, 1862mm in width, and 1709mm in height, with a wheelbase of 2660mm. The 2017 Santa Fe features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 156PS, a maximum power of 115kW, and a maximum torque of 215Nm, paired with a 4-speed automatic transmission.
13
1
Share

What is the reason for the non-functioning tachometer in the Rena?

The reasons for the non-functioning tachometer in the Rena are: 1. The car's tachometer is damaged; 2. The induction coil or sensor is damaged; 3. The tachometer needle is stuck. Taking the 2020 Rena as an example, it belongs to the small car category, with body dimensions of: length 4300mm, width 1705mm, height 1460mm, a wheelbase of 2570mm, a fuel tank capacity of 43l, and a curb weight of 990kg. The 2020 Rena features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.4l naturally aspirated engine, delivering a maximum horsepower of 95ps, a maximum power of 70kw, and a maximum torque of 132.4nm, paired with a 5-speed manual transmission.
15
4
Share

What to Do If a New China 5 Vehicle Cannot Be Licensed?

Solutions for a new China 5 vehicle that cannot be licensed include registering it in a city where the China 6 emission standards have not been implemented. Methods to check if a car meets China 5 emission standards are: 1. Check the vehicle's environmental protection label; 2. Log in to the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center for inquiry; 3. Check the vehicle's factory certificate; 4. Make a rough judgment based on the year the vehicle was licensed; 5. Visit the vehicle management office with the original or a copy of the motor vehicle registration certificate for inquiry. Types of car license plates include: 1. White represents military or police plates; 2. Blue represents ordinary small vehicles with fewer than 7 seats; 3. Yellow represents ordinary large vehicles; 4. Black represents foreign enterprise license plates.
9
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.