How often should the spark plugs of Emgrand GS be replaced?

2 Answers
RobertAnn
08/28/25 6:40am
Geely Emgrand GS's spark plugs have a lifespan of 20,000 kilometers, so they need to be replaced every 20,000 kilometers. Spark plug replacement cycle: Under normal maintenance conditions, they should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine, so it is recommended to follow the user manual. The following standards can be used as a reference for maintenance replacement: platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Steps for replacing spark plugs: Open the hood, lift the plastic cover of the engine, remove the high-voltage distributor wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. When removing them, check if there are any leaves, dust, etc., on the outside and make sure to clean them thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them. Install the removed high-voltage distributor wires in the order of ignition, and then snap the cover back on.
Was this review help?
6
1
Share
VanKate
09/10/25 4:57am
Having driven the Emgrand GS for several years, I believe spark plug replacement should be based on actual conditions. Generally, it's recommended to change them every 30,000 to 40,000 kilometers, or approximately every two years. Once my car experienced unstable idling and insufficient power during acceleration, and the inspection revealed severely carbon-fouled spark plugs. Now I regularly have them checked during maintenance, and platinum spark plugs offer better durability, lasting up to 60,000 kilometers. Don't forget, frequent city driving in congested traffic accelerates spark plug wear. After replacement, the engine ignites more precisely, fuel consumption slightly decreases, and driving becomes smoother. Actually, you can perform a simple spark plug check yourself by pulling them out to examine the electrode gap - if it exceeds 0.9mm, it's time for replacement. Don't wait until they completely fail before fixing them.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

Why Does the Steering Wheel Shake on the Highway?

There are several reasons why the steering wheel shakes when driving at high speeds: 1. Overheating of the brake discs or brake pads, which deform when cooled, causing the steering wheel to shake. This can occur due to excessive braking frequency or overly aggressive braking. It typically manifests as sudden shaking during high-speed driving. Solution: Replace the brake discs or brake pads. 2. Issues with the drivetrain. This usually appears as steering wheel shaking at speeds between 80 km/h and 90 km/h, with normal operation resuming above 90 km/h. Solution: Lift the front axle and test the wheels. If misaligned, adjust them. If the tires are severely deformed, replace them. 3. Inconsistent tire pressure or abnormal tire pressure among the four tires. Solution: Identify the cause and replace the tires if necessary. 4. Problems with wheel alignment. The most common issue is changes in alignment parameters such as toe angle, camber angle, kingpin inclination angle, and caster angle. Solution: Perform a four-wheel alignment. 5. Disrupted wheel balance. Changes in tire weight distribution, such as uneven tire wear or wheel hub deformation, can disrupt wheel balance. Solution: Rebalance the wheels.
19
0
Share

What are the differences between the Audi S4 and A4?

The Audi A4 Dream Edition serves as the foundation for the S4, with the S4 being a more powerful, all-wheel-drive, and sport-suspension upgraded version. Below are the key differences between the S4 and A4: The S4 is a well-balanced sports sedan with exquisite styling and outstanding performance. The A4 is a luxury car focused on daily use, comfort, and low fuel consumption, making it suitable for everyday driving by average car owners. 2. Compared to the A4, the Audi S4 has a body lowered by 33 millimeters and is priced several tens of thousands of yuan higher. The S4 comes with 18-inch alloy wheels and 245/40R18 tires, with an option for larger 19-inch wheels. 3. The S4's engine, chassis, suspension, gearbox, and seats are all designed for sportiness, making it cooler, more stylish, and more youthful than the A4. 4. The most significant visual difference between the A4 and S4 is the side mirrors. The A4's mirrors are painted the same color as the body, while the S4's are in a bright silver finish.
4
1
Share

How to Connect the Three Pins of an H4 Bulb?

The wiring method for the three pins of an H4 bulb is as follows: 1. The three pins are color-coded as black, white, and blue; 2. The black wire needs to be connected to the ground wire, the white wire to the low beam wire, and the blue wire to the high beam wire; 3. If the ground wire is not connected, the bulb will not light up, so it is essential to follow the correct sequence when installing the bulb. Additional Information: 1. There are two types of H4 bulbs: the first is 12V 65/55 watts, and the second is 24V 75/70 watts. Ordinary small vehicles use the first type. When replacing a faulty bulb, it is crucial to use the same model as the original to ensure the proper functioning of the vehicle's lighting system and avoid safety hazards. 2. A faulty vehicle bulb can compromise driving safety, especially at night. It is important to regularly check the bulbs for damage when driving at night. If any damage is found, replace the bulb promptly. The replacement process is quick and can usually be completed in just a few minutes.
2
3
Share

Where is the keyhole of the Baojun 510?

The keyhole on the door of the Baojun 510 is hidden, designed with a concealed mechanism. By removing the decorative cover on the door handle, you can reveal the keyhole. Additional information regarding the Baojun 510 key system is as follows: 1. When the owner enters the sensing area of the key system, simply touching the door handle will cause the carried identification "key" to receive a low-frequency signal transmitted by the car. If this signal matches the identification information stored in the "key," the "key" will be activated. 2. Once activated, the "key" will analyze the authentication command sent by the car and transmit a corresponding signal, which is encrypted to enhance security. The car will compare the received signal with the information stored internally, and if verification is successful, the car door lock will be released. 3. Once the driver enters the car, simply pressing the start button will initiate the car engine. Upon button activation, the PKE system first checks if the "key" device is inside the car, then completes the same authentication process before starting the engine. When the driver leaves the car, pressing the door handle once will lock the car doors. Before the car is fully locked, it will again verify the driver's position and go through the same authentication process.
17
0
Share

What Causes the Battery Light to Flash?

There are several reasons why the car battery indicator light may flash: 1. If the battery light turns red and flashes when you turn on the ignition, it usually indicates low battery voltage. This means the vehicle's computer has detected insufficient charge, and the battery needs immediate recharging. 2. If the battery light flashes while driving, it typically suggests a malfunction in the alternator system. Possible causes include a broken alternator belt or damaged alternator components, requiring inspection and repair at a 4S shop or auto repair center. Below are explanations of common vehicle warning lights: 1. Oil Pressure Warning Light: This indicates insufficient oil level or pressure. Continued driving without addressing this may cause severe engine wear. Add appropriate oil; if the light persists, seek professional inspection. 2. Brake System Warning Light: First check if the parking brake is fully released. If the light remains on, inspect brake fluid level or brake pad thickness. If braking performance is compromised, pull over safely; if functional, drive cautiously to the nearest repair shop. 3. Engine Check Light: This monitors engine operation. It should turn off after startup if normal. Continuous illumination indicates engine issues requiring inspection. 4. Coolant Temperature Warning Light: Signals overheating engine coolant. Prolonged driving under this condition may cause irreversible engine damage. Add coolant immediately when this occurs.
16
3
Share

Where is the fresh air flap servo motor located in the Audi A6?

Audi A6 fresh air flap servo motor is located inside the evaporator assembly with the blower in the front. Common faults and causes of servo motors: Motor powered on, mechanical oscillation: Common causes for such faults include: pulse encoder failure. At this time, check whether the servo system is stable, whether the circuit board maintenance detects stable current, and whether the voltage on the speed detection unit feedback line terminal drops at certain points. If there is a drop, it indicates a faulty pulse encoder, replace the encoder; the pulse encoder universal joint may be damaged, causing the shaft speed to be out of sync with the detected speed, replace the universal joint; the tachogenerator may be faulty. Repair or replace the tachogenerator. In maintenance practice, tachogenerator brush wear and sticking are common. At this time, remove the tachogenerator brush, sand it lightly with steel sandpaper, clean the commutator dirt, and reinstall it properly. Motor powered on, abnormal rapid mechanical movement: When such a servo system fault occurs, while checking the position control unit and speed control unit, also check: whether the pulse encoder wiring is incorrect; whether the pulse encoder universal joint is damaged; check whether the tachogenerator terminals are reversed and whether the excitation signal line is incorrectly connected. Generally, such phenomena should be handled by professional circuit board maintenance technicians, otherwise it may lead to more serious consequences.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.