How often should the spark plugs of a Tiggo 3 be replaced?

1 Answers
LeAlyssa
07/30/25 3:55am
The replacement interval for Tiggo 3 spark plugs is 30,000 kilometers. Spark plugs are a crucial component of a gasoline engine's ignition system. They introduce high-voltage electricity into the combustion chamber and generate sparks by jumping the electrode gap, thereby igniting the combustible air-fuel mixture in the cylinder. If a spark plug is damaged, it can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, and reduced power. The most significant problem is difficulty in ignition, which affects the normal operation of the vehicle. Severe erosion of the spark plug, such as blistering at the top, damage, or melted and eroded electrodes, indicates that the spark plug is already damaged and should be replaced. Steps for replacing spark plugs: Open the engine hood, lift the plastic cover of the engine, and remove the high-voltage ignition wires. Mark each cylinder's position to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for external debris like leaves or dust and ensure they are thoroughly cleaned. Place the new spark plug into the spark plug hole, hand-tighten it a few turns, and then use the socket to tighten it further. Reinstall the removed high-voltage ignition wires according to the firing order, and then secure the cover.
Was this review help?
18
4
Share
More Forum Discussions

How often should Oshan tires be replaced?

Oshan tires generally need to be replaced after driving 50,000 to 80,000 kilometers. Since tires are rubber products, they are prone to aging. If the tires have been in use for 3 years since production but haven't reached the recommended mileage, it's advisable to replace them for safety reasons. Below is more information about Oshan: 1. Development Model: Changan Oshan Auto relies on the research and development resources of Changan Auto Group and consistently adheres to the development model of 'self-reliance and independent innovation.' 2. Front Grille: The front grille and lower air intake of Oshan both feature a U-shaped design with chrome accents. The elongated and upward-slanting headlights complement the raised lines on the hood. 3. Headlights: The interior now includes blue accents to enhance visual appeal. The sides of the body feature crisp, straight lines, while the rear maintains a clean and streamlined appearance.
6
5
Share

What Maintenance Does a BMW Need at 20,000 Kilometers?

The main maintenance items at 20,000 kilometers include the following: 1. Replace the engine oil and oil filter (10,000-kilometer maintenance interval), air filter (20,000-kilometer maintenance interval). 2. Replace the fuel filter (20,000-kilometer maintenance interval), cabin air filter (20,000-kilometer maintenance interval). 3. Depending on the vehicle condition and environment, carbon deposit cleaning may also be considered. Here is some additional information about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. The purpose of car maintenance is to keep the vehicle clean, maintain normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the service life.
17
3
Share

Can the Peugeot 307 be powered off when replacing the battery?

Yes, you can power it off, and just reset the time after replacement. Here are the specific details about the Peugeot 307: 1. Power: The Peugeot 307 is equipped with a 1.6-liter naturally aspirated engine, with a maximum horsepower of 117 hp, a maximum power of 86 kW, and a maximum torque of 150 N·m. 2. Fuel consumption: According to the comprehensive fuel consumption data from the Ministry of Industry and Information Technology, the Peugeot 307 has a combined fuel consumption of 7.3L/100km. 3. Transmission: The Peugeot 307 offers a choice between a 5-speed manual and a 4-speed automatic transmission. In terms of suspension, the front suspension of the Peugeot 307 is a MacPherson independent suspension, and the rear suspension is a deformable crossbeam type with a lateral stabilizer bar.
5
0
Share

How to Remove the Navigation System in Kia K3?

Removal method for Kia K3 navigation system: Remove the decorative panel, unscrew the left-hand side screw, pry out the clips of the decorative strip, then disconnect the wiring harness to remove the navigation assembly. Based on positioning, the car navigation system can provide the optimal driving route, road conditions ahead, and information on the nearest gas stations, restaurants, and hotels through a multifunctional display. Below is an introduction to the car navigation system: The car GPS navigation system consists of two parts. One part includes the GPS receiver and display device installed in the car, and the other part is the computer control center, which communicates via positioning satellites. The computer control center is authorized and established by the motor vehicle management department, responsible for monitoring the dynamics and traffic conditions of designated vehicles within its jurisdiction. Therefore, the entire car navigation system has at least two major functions: vehicle tracking and monitoring, and driving guidance.
14
4
Share

Does the Levin have an anti-collision beam?

Toyota Levin cars are equipped with a rear anti-collision beam. Here is more information about the anti-collision beam: 1. The anti-collision beam is a device used to absorb collision energy when the vehicle is impacted. It consists of a main beam, an energy absorption box, and an installation plate connected to the car. Both the main beam and the energy absorption box can effectively absorb collision energy during low-speed collisions. 2. It minimizes the damage to the vehicle's longitudinal beams by reducing the impact force, thereby playing a protective role for the vehicle. 3. Anti-collision beams are divided into front and rear anti-collision beams. The front anti-collision beam is usually connected to the vehicle's longitudinal beams to protect rear components such as the radiator, reducing losses in minor accidents. The materials used are generally steel, fiberglass, or aluminum alloy, with a thickness of 1.5 to 3mm. The front anti-collision beam is usually covered with a layer of foam supporting the outer plastic skin, mainly serving to protect pedestrians.
2
1
Share

What are the steps to reset the maintenance light on the Refine M3?

Refine M3 maintenance light reset method: 1. Turn off the ignition switch. 2. Press and hold the button on the combination meter. 3. Turn the ignition switch to the "ACC" position to power on the vehicle. 4. Keep pressing the button on the combination meter for more than 10 seconds. 5. The small wrench icon on the dashboard will disappear, indicating the maintenance light has been reset. Below is relevant information about the maintenance light: 1. The vehicle dashboard is equipped with a maintenance light. If the owner does not perform maintenance after exceeding 12,000 km, the maintenance light will flash continuously to remind the owner to perform timely maintenance. 2. Before the vehicle undergoes maintenance, do not reset the maintenance light just because it remains on, as this will make the accumulated maintenance mileage on the odometer inaccurate. 3. When the trip meter reaches 9,600-12,000 km, the maintenance light will illuminate for 2 seconds upon turning on the ignition switch.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.