···
Log in / Register

How often should the spark plugs of a CCTSI engine be replaced?

4 Answers
AnnaAnn
07/29/25 1:43pm
CCTSI engine spark plugs should be replaced every 20,000 kilometers. The original 2.0T engine uses NGK PFR7S8EG spark plugs. The steps for replacing spark plugs are as follows: 1. Prepare a complete set of disassembly tools. 2. Remove the wiring plug on the ignition coil and the bolts on the ignition coil, then pull out the ignition coil. 3. After removing these, the exposed spark plugs can be seen, and a socket can be used to remove the spark plugs. (Note: The angle between the spark plug and the wrench should be vertical; an incorrect angle may cause thread stripping.) 4. Install the new spark plugs. Remember to slide them slowly along the inner wall to avoid collisions that could affect the spark plug's ignition gap. Methods for cleaning carbon deposits from spark plugs: 1. Carburetor cleaner: Place some cleaner in a container, soak the spark plugs for about 20 minutes, and gently scrub the spark plug heads with a brush to remove carbon deposits. 2. White vinegar cleaning: The method is the same as using carburetor cleaner, but it is quicker and more convenient. The white vinegar method should not be used frequently, as its corrosiveness can affect the spark plugs. After use, remember to rinse off any residual white vinegar from the surface.
Was this review help?
15
1
Share
BrynleeAnn
08/14/25 4:50am
Regarding the spark plug replacement for the CCTSI engine, most owner's manuals recommend inspection or replacement every 40,000 to 60,000 kilometers. As someone who has driven this engine for over three years, I make it a habit to have the mechanic test them during my biennial maintenance. If the engine starts slower or fuel consumption noticeably increases, it might indicate worn-out spark plugs. I usually opt for iridium ones, which are more durable and can last up to 80,000 kilometers, but it's crucial not to delay replacement too long—wear accelerates in high-temperature conditions. After replacement, the car accelerates more smoothly. Regular maintenance can save a lot of repair headaches, with safe driving being the top priority. During inspection, pay attention to the ignition coils and connections to avoid electrical leakage issues.
Was this review help?
13
2
Share
Expand All
VonValeria
10/10/25 4:49am
From a professional perspective, the replacement interval for spark plugs depends on the material and driving habits. The CCTSI engine has high turbocharging pressure, which makes spark plugs more susceptible to heat effects. I recommend replacing the original parts every approximately 50,000 kilometers. Platinum series spark plugs have a longer lifespan, reaching 60,000 to 80,000 kilometers. If delayed for too long, the engine may experience shaking, insufficient power output, and compromised handling feel. Based on personal experience, it's advisable to replace them during regular maintenance every three or three and a half years, rather than waiting for a malfunction to occur. Waiting could lead to higher repair costs and potential damage to other components. Always ensure the correct spark plug model is selected to match the engine specifications.
Was this review help?
13
4
Share
Expand All
LeMarcus
11/23/25 6:01am
The user manual states that the spark plug replacement interval is between 40,000 to 50,000 kilometers. When driving a similar vehicle, I strictly adhere to this guideline to avoid engine failure risks. The turbocharged system operates under high pressure, causing faster spark plug wear. It's essential to check the battery voltage and test the ignition gap accordingly. Keeping maintenance simple and efficient is key.
Was this review help?
7
3
Share
Expand All
More Forum Discussions

How to Adjust the Display Content on the BMW 1 Series Dashboard?

The method to adjust the display content on the BMW 1 Series dashboard is by using the BC button located at the top of the turn signal lever. Below is some relevant information about the BMW 1 Series: Exterior: The entire body continues the family design concept. The front of the car appears stylish and imposing, with fashionable polygonal angel eyes on both sides. The internal lamp groups are arranged in a staggered pattern, and the side body lines are designed with a tendency to bulge backward. Performance: It is equipped with a 2.0 engine, delivering a maximum output power of 141kW and a maximum torque of 280Nm. The official tested 0-100km/h acceleration time is 7.5 seconds.
20
0
Share

What's the Difference Between 911.1 and 911.2?

Porsche 991.1 is the initial version of the Porsche 991 series, while 991.2 is the facelifted version of the 991 series. The biggest difference between these two cars is that the 991.1 uses a naturally aspirated engine, whereas the 991.2 employs a turbocharged engine. The specific differences are as follows: 991.1 The most notable change in the 991.1 is that the LED daytime running lights are integrated with the lower air intake on the front fascia. The rear still features full LED lights, with very slim taillights. The 991.2 is a minor facelift of the 991 series, transitioning from the previous naturally aspirated engine to a turbocharged engine. 991.2: The exterior of the 991.2 doesn't show significant changes, with the main focus being on the headlights. The LED daytime running lights in the 991.2 are integrated into the headlights, replacing the original LED daytime running lights with independent turn signals. The design of the headlights becomes very slim, and the horizontal rear cooling grille is changed to a vertical orientation.
3
2
Share

What do the function buttons in the GAC Trumpchi GS4 mean?

GAC Trumpchi GS4 function buttons are explained as follows: OFF button: Used to turn off the air conditioning system. Temperature increase button: Used to raise the desired interior temperature. Fan speed increase button: Used to manually increase the blower speed setting. MODE button: Selects the airflow direction from the vents, with adjustments displayed on the screen. Front defroster button: Turns the front windshield defrosting/misting function on or off. Fan speed decrease button: Used to manually decrease the blower speed setting. Recirculation button: Turns the air recirculation mode on or off. Temperature decrease button: Used to lower the desired interior temperature. A/C button: Used to activate the air conditioning cooling system.
11
4
Share

What is the fuel consumption of the Honda CB400?

The Honda CB400 typically consumes between 4.5 to 5.5 liters of fuel per 100 kilometers. Below are specific methods to reduce vehicle fuel consumption: Minimize vehicle weight: Keep the interior as simple as possible and avoid carrying unnecessary items, as every additional kilogram of load increases fuel consumption by 1%. Avoid excessive vehicle modifications: Adding spoilers, protective covers, or wings can disrupt the original aerodynamic design of the vehicle, increasing wind resistance and consuming extra fuel. Modifying lighting systems can also increase electrical load, leading to unnecessary fuel consumption. Develop good driving habits: Avoid sudden acceleration, driving at high speeds in low gears, prolonged idling, frequent lane changes, or braking. Aim for smooth starts, consistent speed, and reduced braking.
14
4
Share

What are the BMW X1 steering wheel button functions?

Here are the BMW X1 steering wheel button functions: LIM: Speed limiter (This system allows speed limitation starting from 30 km/h. Driving below the set speed won't be restricted. In special circumstances, the speed limit can be consciously exceeded by pressing the accelerator firmly. A warning will display if the vehicle exceeds the set speed limit.). Switch: Turns cruise control on/off or interrupts it. RES: Cruise control: Recalls stored speed. Speed adjustment: Cruise control rocker switch. MODE: Visual device source selection. Volume adjustment: Decreases or increases volume. Track selection: Part of the selection list scroll wheel.
16
0
Share

What are the button introductions for the Buick Velite 6?

The Buick Velite 6 steering wheel does not have paddle shifters or heating but comes with multifunction buttons. The buttons on the left side are primarily for ACC adaptive cruise control settings, including resume/accelerate, cruise off, voice control, cruise on, set/decelerate, distance setting, and hang up. The buttons on the right side of the Buick Velite 6 steering wheel are mainly for multimedia control, featuring track up/down, directional selection, confirm, and volume adjustment buttons. Below is the related introduction: Powertrain: The Buick Velite 6 plug-in hybrid model is equipped with a 1.5L naturally aspirated engine + dual permanent magnet synchronous motors. The engine delivers a maximum power of 102 horsepower and a maximum torque of 143 Nm. The main motor provides a maximum power of 82 kW and a torque of 289 Nm, while the secondary motor offers a maximum power of 49 kW and a torque of 116 Nm. Transmission: The vehicle uses an E-CVT transmission, enabling hybrid/motor-only/engine-only driving modes. In addition to "Normal" and "Sport" driving modes, the car also features a "Hold" mode (essentially a battery hold mode).
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.